[U-Boot] Changing endianness of at91sam926x causes u-boot to crash

[Ulf Samuelsson]

tor 2009-01-15 klockan 19:17 +0100 skrev dibacco at libero.it:
> Hi all,
> 
> I have a board with at91sam9260 configured as little endian (via strap 
> pin). The u-boot is working quite well.
> On the board there is a chip whose 
> driver was written for PowerPC that is big endian. Unfortunately the driver was
> 
> written in a bad way and it is difficult to fix endiannes dependencies. I 
> thought to change the endianness of the processor
> to big endian. I recompiled 
> everything with a big endian compiler but the u-boot is crashing. Should I 
> change something
> on my hardware?

The AT91 series is strictly small endian.

Before there is an argument, I'd like to point
out people came to the conclusion that 
"the only good endian is a dead endian"
years ago.


> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
-- 
Ulf Samuelsson <ulf.samuelsson at atmel.com>
Atmel Nordic AB