[U-Boot] [PATCH 05/07] Coldfire: M5271EVB: Board header update (has dependencies)

[Richard Retanubun]

Cleanup for M5271EVB:
Added clarification on the use of CONFIG_SYS_CLOCK.
Modified to use u-boot's HUSH parser.
Cleanup on environment settings.

Dependencies:
Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
This depends on a patch to include/asm-m68k/m5271.h
that defines the multiplier and divider ratios.

Removed the definition of CONFIG_SYS_FECI2C.
This depends on a patch that removes the use of it in
cpu/mcf52x2/cpu_init.c

Signed-off-by: Richard Retanubun <RichardRetanubun at RuggedCom.com>
---
This patch depends on:
Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
This depends on a patch to include/asm-m68k/m5271.h
that defines the multiplier and divider ratios.

Removed the definition of CONFIG_SYS_FECI2C.
This depends on a patch that removes the use of it in
cpu/mcf52x2/cpu_init.c

  include/configs/M5271EVB.h |   35 +++++++++++++++++++++++------------
  1 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 7ddeb55..b8eb156 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -82,11 +82,14 @@
  #define CONFIG_CMD_MISC

  #undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMDLINE_EDITING	1 /* enables command line history */
+#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

  #define CONFIG_MCFFEC
  #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_MULTI		1
+#	define CONFIG_NET_MULTI		0
  #	define CONFIG_MII		1
  #	define CONFIG_MII_INIT		1
  #	define CONFIG_SYS_DISCOVER_PHY
@@ -116,7 +119,7 @@
  #define CONFIG_SYS_I2C_OFFSET		0x00000300
  #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR

-#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
  #define CONFIG_BOOTFILE		"u-boot.bin"
  #ifdef CONFIG_MCFFEC
  #	define CONFIG_NET_RETRY_COUNT	5
@@ -128,16 +131,16 @@
  #	define CONFIG_OVERWRITE_ETHADDR_ONCE
  #endif				/* FEC_ENET */

-#define CONFIG_HOSTNAME		M5235EVB
+#define CONFIG_HOSTNAME		M5271EVB
  #define CONFIG_EXTRA_ENV_SETTINGS		\
  	"netdev=eth0\0"				\
  	"loadaddr=10000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"uboot=u-boot.bin\0"		\
+	"load=tftp $loadaddr $uboot\0"	\
  	"upd=run load; run prog\0"		\
-	"prog=prot off ffe00000 ffe2ffff;"		\
-	"era ffe00000 ffe2ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=prot off ffe00000 ffe3ffff;"	\
+	"era ffe00000 ffe3ffff;"		\
+	"cp.b $loadaddr ffe00000 $filesize;"	\
  	"save\0"				\
  	""

@@ -159,7 +162,18 @@
  #define CONFIG_SYS_MEMTEST_END		0x380000

  #define CONFIG_SYS_HZ			1000000
+
+/* Clock configuration
+ * The external oscillator is a 25.000 MHz
+ * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk)
+ * bus_clk = (cpu_clk/2) (fixed ratio)
+ *
+ * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to
+ * match the new clock speed. Max cpu_clk is 150 MHz.
+ */
  #define CONFIG_SYS_CLK			100000000
+#define CONFIG_SYS_MCF_SYNCR 	(CONFIG_SYS_MCF_SYNCR_MFD_4X | \
+				CONFIG_SYS_MCF_SYNCR_RFD_DIV1)

  /*
   * Low Level Configuration Settings
@@ -216,7 +230,4 @@
  /* Cache Configuration */
  #define CONFIG_SYS_CACHELINE_SIZE	16

-/* Port configuration */
-#define CONFIG_SYS_FECI2C		0xF0
-
  #endif				/* _M5271EVB_H */
-- 
1.5.6.5