[U-Boot] Please pull u-boot-mpc85xx.git

Wolfgang Denk wd at denx.de
Sat Jan 24 02:20:43 CET 2009


Dear Andy Fleming,

In message <1232753424-2863-1-git-send-email-afleming at freescale.com> you wrote:
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-mpc85xx.git master
> 
> Dave Liu (5):
>       fsl-ddr: update the bit mask for DDR3 controller
>       fsl-ddr: clean up the ddr code for DDR3 controller
>       fsl-ddr: make the self refresh idle threshold configurable
>       fsl-ddr: use the 1T timing as default configuration
>       85xx: enable the auto self refresh for wake up ARP
> 
> Haiying Wang (2):
>       Add README file for MPC8572DS board
>       Add secondary CPUs processor frequency for e500 core
> 
> Kumar Gala (10):
>       85xx: separate PIXIS virtual from physical address
>       85xx: separate FLASH BASE virtual from physical address
>       85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
>       85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
>       85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
>       85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
>       85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
>       85xx: Use BR_ADDR macro for NAND chipselects
>       85xx: Handle eLBC difference w/36-bit physical
>       85xx: Add a 36-bit physical configuration for MPC8572DS
> 
>  MAKEALL                                 |    1 +
>  Makefile                                |    8 ++-
>  board/freescale/mpc8536ds/ddr.c         |    6 +
>  board/freescale/mpc8536ds/law.c         |    4 +-
>  board/freescale/mpc8536ds/mpc8536ds.c   |   30 +++---
>  board/freescale/mpc8536ds/tlb.c         |    8 +-
>  board/freescale/mpc8540ads/ddr.c        |    3 +
>  board/freescale/mpc8540ads/law.c        |    2 +-
>  board/freescale/mpc8540ads/tlb.c        |    8 +-
>  board/freescale/mpc8541cds/tlb.c        |    8 +-
>  board/freescale/mpc8544ds/ddr.c         |    3 +
>  board/freescale/mpc8544ds/mpc8544ds.c   |   34 +++---
>  board/freescale/mpc8544ds/tlb.c         |    6 +-
>  board/freescale/mpc8548cds/mpc8548cds.c |    8 +-
>  board/freescale/mpc8548cds/tlb.c        |    6 +-
>  board/freescale/mpc8555cds/tlb.c        |    8 +-
>  board/freescale/mpc8560ads/ddr.c        |    3 +
>  board/freescale/mpc8560ads/law.c        |    2 +-
>  board/freescale/mpc8560ads/tlb.c        |    8 +-
>  board/freescale/mpc8568mds/law.c        |    2 +-
>  board/freescale/mpc8568mds/mpc8568mds.c |    8 +-
>  board/freescale/mpc8568mds/tlb.c        |    2 +-
>  board/freescale/mpc8572ds/law.c         |    4 +-
>  board/freescale/mpc8572ds/mpc8572ds.c   |   16 ++--
>  board/freescale/mpc8572ds/tlb.c         |   12 +-
>  board/freescale/mpc8610hpcd/ddr.c       |    3 +
>  board/freescale/mpc8641hpcn/ddr.c       |    2 +
>  board/stxgp3/ddr.c                      |    3 +
>  board/stxssa/ddr.c                      |    3 +
>  cpu/mpc85xx/cpu.c                       |    7 +-
>  cpu/mpc85xx/fdt.c                       |   15 +++-
>  cpu/mpc85xx/pci.c                       |   32 +++++--
>  cpu/mpc85xx/speed.c                     |   10 +-
>  cpu/mpc8xxx/ddr/ctrl_regs.c             |   48 ++++++----
>  cpu/mpc8xxx/ddr/options.c               |    2 +-
>  doc/README.mpc8572ds                    |  167 +++++++++++++++++++++++++++++++
>  include/asm-ppc/fsl_ddr_sdram.h         |    7 ++
>  include/asm-ppc/fsl_lbc.h               |    8 ++-
>  include/configs/MPC8536DS.h             |   63 +++++++-----
>  include/configs/MPC8540ADS.h            |   13 ++-
>  include/configs/MPC8541CDS.h            |   16 ++-
>  include/configs/MPC8544DS.h             |   47 ++++++----
>  include/configs/MPC8548CDS.h            |   28 ++++--
>  include/configs/MPC8555CDS.h            |   16 ++-
>  include/configs/MPC8560ADS.h            |   13 ++-
>  include/configs/MPC8568MDS.h            |   20 +++--
>  include/configs/MPC8572DS.h             |   98 ++++++++++++++----
>  include/e500.h                          |    6 +-
>  48 files changed, 595 insertions(+), 232 deletions(-)
>  create mode 100644 doc/README.mpc8572ds

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No more blah, blah, blah!
	-- Kirk, "Miri", stardate 2713.6


More information about the U-Boot mailing list