[U-Boot] [PATCH v2 2/5] OMAP3: Add Overo board

Jason Kridner jkridner at beagleboard.org
Sun Jan 25 20:55:48 CET 2009


From: Dirk Behme <dirk.behme at googlemail.com>

Add Overo board support.

Signed-off-by: Steve Sakoman <sakoman at gmail.com>
Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
Signed-off-by: Jason Kridner <jkridner at beagleboard.org>
---
 MAINTAINERS                   |    4 +
 MAKEALL                       |    1 +
 Makefile                      |    3 +
 board/omap3/common/Makefile   |    1 +
 board/omap3/overo/Makefile    |   48 +++++
 board/omap3/overo/config.mk   |   29 +++
 board/omap3/overo/overo.c     |   88 ++++++++++
 board/omap3/overo/overo.h     |  381 +++++++++++++++++++++++++++++++++++++++++
 board/omap3/overo/u-boot.lds  |   63 +++++++
 doc/README.omap3              |   15 ++-
 include/configs/omap3_overo.h |  318 ++++++++++++++++++++++++++++++++++
 11 files changed, 949 insertions(+), 2 deletions(-)
 create mode 100644 board/omap3/overo/Makefile
 create mode 100644 board/omap3/overo/config.mk
 create mode 100644 board/omap3/overo/overo.c
 create mode 100644 board/omap3/overo/overo.h
 create mode 100644 board/omap3/overo/u-boot.lds
 create mode 100644 include/configs/omap3_overo.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 6bc3f53..e1c05c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -599,6 +599,10 @@ Nomadik Linux Team <STN_WMM_nomadik_linux at list.st.com>
 
 	nmdk8815	ARM926EJS (Nomadik 8815 Soc)
 
+Steve Sakoman <sakoman at gmail.com>
+
+	omap3_overo	ARM CORTEX-A8 (OMAP3xx SoC)
+
 Robert Schwebel <r.schwebel at pengutronix.de>
 
 	csb226		xscale
diff --git a/MAKEALL b/MAKEALL
index 08168c8..4adc1dd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -549,6 +549,7 @@ LIST_ARM11="		\
 #########################################################################
 LIST_ARM_CORTEX_A8="		\
 	omap3_beagle		\
+	omap3_overo		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 8386b7d..93b3eed 100644
--- a/Makefile
+++ b/Makefile
@@ -2911,6 +2911,9 @@ SMN42_config	:	unconfig
 omap3_beagle_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
 
+omap3_overo_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+
 #########################################################################
 ## XScale Systems
 #########################################################################
diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile
index 28fbf54..0b251c5 100644
--- a/board/omap3/common/Makefile
+++ b/board/omap3/common/Makefile
@@ -30,6 +30,7 @@ endif
 LIB	= $(obj)lib$(VENDOR).a
 
 COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o
+COBJS-$(CONFIG_OMAP3_OVERO) += power.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/board/omap3/overo/Makefile b/board/omap3/overo/Makefile
new file mode 100644
index 0000000..ed5f451
--- /dev/null
+++ b/board/omap3/overo/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= overo.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
diff --git a/board/omap3/overo/config.mk b/board/omap3/overo/config.mk
new file mode 100644
index 0000000..d372fd9
--- /dev/null
+++ b/board/omap3/overo/config.mk
@@ -0,0 +1,29 @@
+#
+# Overo uses OMAP3 (ARM-CortexA8) cpu
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c
new file mode 100644
index 0000000..7964123
--- /dev/null
+++ b/board/omap3/overo/overo.c
@@ -0,0 +1,88 @@
+/*
+ * Maintainer : Steve Sakoman <steve at sakoman.com>
+ *
+ * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
+ *	Richard Woodruff <r-woodruff2 at ti.com>
+ *	Syed Mohammed Khasim <khasim at ti.com>
+ *	Sunil Kumar <sunilsaini05 at gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "overo.h"
+
+/******************************************************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************************************************/
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_OVERO;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/******************************************************************************
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ *****************************************************************************/
+int misc_init_r(void)
+{
+	gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
+	gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
+
+	power_init_r();
+
+	/* Configure GPIOs to output */
+	writel(~((GPIO10) | GPIO9 | GPIO3 | GPIO2), &gpio6_base->oe);
+	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
+
+	/* Set GPIOs */
+	writel(GPIO10 | GPIO9 | GPIO3 | GPIO2, &gpio6_base->setdataout);
+	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
+
+	return 0;
+}
+
+/******************************************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ *****************************************************************************/
+void set_muxconf_regs(void)
+{
+	MUX_OVERO();
+}
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
new file mode 100644
index 0000000..3c1b6bc
--- /dev/null
+++ b/board/omap3/overo/overo.h
@@ -0,0 +1,381 @@
+/*
+ * (C) Copyright 2008
+ * Steve Sakoman <steve at sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OVERO_H_
+#define _OVERO_H_
+
+const omap3_sysinfo sysinfo = {
+	SDP_3430_V1,
+	SDP_3430_V2,
+	DDR_STACKED,
+	"3503",
+	"Gumstix Overo board",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+	"OneNAND",
+#else
+	"NAND",
+#endif
+};
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_OVERO() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_A1),		(IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2),		(IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3),		(IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4),		(IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5),		(IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6),		(IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7),		(IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8),		(IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9),		(IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10),		(IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0),		(IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1),		(IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2),		(IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3),		(IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4),		(IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5),		(IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6),		(IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7),		(IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8),		(IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9),		(IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10),		(IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11),		(IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12),		(IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13),		(IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14),		(IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
+ MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
+ MUX_VAL(CP(GPMC_NCS3),		(IEN  | PTU | EN  | M4)) /*GPIO_54*/\
+							 /* - MMC1_WP*/\
+ MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
+ MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS6*/\
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M0)) /*GPMC_nCS7*/\
+ MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
+ MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+ MUX_VAL(CP(GPMC_WAIT1),	(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /*GPMC_nCS3*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS),	(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10),	(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11),	(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12),	(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13),	(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14),	(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15),	(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16),	(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17),	(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18),	(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19),	(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20),	(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21),	(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22),	(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23),	(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*CAMERA*/\
+ MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) /*CAM_HS */\
+ MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) /*CAM_VS */\
+ MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
+ MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
+ MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
+ MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
+ MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
+ MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
+ MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
+ MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
+ MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
+ MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
+ MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
+ MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
+ MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
+ MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
+ MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
+ MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M0)) /*CAM_WEN*/\
+ MUX_VAL(CP(CAM_STROBE),	(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+ MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
+ MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
+ MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1*/\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTU | EN  | M4)) /*GPIO_115*/\
+ /*Audio Interface */\
+ MUX_VAL(CP(MCBSP2_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
+ MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
+ MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
+ MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+ /*Expansion card */\
+ MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+ MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+ MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
+ MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
+ MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
+ MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
+ MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
+ /*Wireless LAN */\
+ MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
+ MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
+ /*Bluetooth*/\
+ MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
+ MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+ MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
+ MUX_VAL(CP(MCBSP3_FSX),	(IEN  | PTD | DIS | M1)) /*UART2_RX*/\
+ MUX_VAL(CP(UART2_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\
+ MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M4)) /*GPIO_145*/\
+ MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M4)) /*GPIO_146*/\
+ MUX_VAL(CP(UART2_RX),		(IDIS | PTD | DIS | M4)) /*GPIO_147*/\
+ MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS),		(IEN  | PTU | DIS | M4)) /*GPIO_149*/ \
+ MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\
+ MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
+ MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP4_CLKX*/\
+ MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M0)) /*McBSP4_DR*/\
+ MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M0)) /*McBSP4_DX*/\
+ MUX_VAL(CP(MCBSP4_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
+ MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) /*McBSP1_CLKR*/\
+ MUX_VAL(CP(MCBSP1_FSR),	(IEN  | PTD | DIS | M0)) /*McBSP1_FSR*/\
+ MUX_VAL(CP(MCBSP1_DX),		(IEN  | PTD | DIS | M0)) /*McBSP1_DX*/\
+ MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) /*McBSP1_DR*/\
+ MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP1_FSX*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP1_CLKX*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS_RCTX*/\
+ MUX_VAL(CP(UART3_RTS_SD),	(IEN  | PTU | EN  | M4)) /*GPIO_164 W2W_*/\
+							 /* BT_NRESET*/\
+ MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTU | EN  | M0)) /*UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
+ MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT),	(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
+ MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /*GPIO_168*/\
+							 /* - USBH_CPEN*/\
+ MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /*GPIO_183*/\
+							 /* - USBH_RESET*/\
+ MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
+ MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*HDQ_SIO*/\
+ MUX_VAL(CP(MCSPI1_CLK),	(IEN  | PTD | DIS | M0)) /*McSPI1_CLK*/\
+ MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) /*McSPI1_SIMO */\
+ MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOMI */\
+ MUX_VAL(CP(MCSPI1_CS0),	(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
+ MUX_VAL(CP(MCSPI1_CS1),	(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
+ MUX_VAL(CP(MCSPI1_CS2),	(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+ MUX_VAL(CP(MCSPI1_CS3),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA2*/\
+ MUX_VAL(CP(MCSPI2_CLK),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA7*/\
+ MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA4*/\
+ MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA5*/\
+ MUX_VAL(CP(MCSPI2_CS0),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA6*/\
+ MUX_VAL(CP(MCSPI2_CS1),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA3*/\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ),	(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+ MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
+ MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+ MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
+ MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
+ MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT4*/\
+ MUX_VAL(CP(ETK_D1_ES2),	(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
+ MUX_VAL(CP(ETK_D2_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_16*/\
+							 /* - W2W_NRESET*/\
+ MUX_VAL(CP(ETK_D3_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT3*/\
+ MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
+ MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
+ MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
+ MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT7*/\
+ MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT6*/\
+ MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT5*/\
+ MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
+ MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | EN  | M3)) /*HSUSB2_STP*/\
+ MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DIR*/\
+ MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_NXT*/\
+ MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA0*/\
+ MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA1*/\
+ /* die to die */\
+ MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10),	(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11),	(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12),	(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13),	(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14),	(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15),	(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16),	(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17),	(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18),	(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19),	(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20),	(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21),	(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22),	(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23),	(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24),	(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25),	(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26),	(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27),	(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28),	(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29),	(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30),	(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31),	(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32),	(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33),	(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34),	(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35),	(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36),	(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
+ MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
+ MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
+ MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
+ MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
+ MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
+ MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
+ MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
+ MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
+ MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
+ MUX_VAL(CP(D2D_N3GTDI),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
+ MUX_VAL(CP(D2D_MSTDBY),	(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
+ MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
+ MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
+ MUX_VAL(CP(D2D_MWRITE),	(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE),	(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
+ MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
+ MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+
+#endif
diff --git a/board/omap3/overo/u-boot.lds b/board/omap3/overo/u-boot.lds
new file mode 100644
index 0000000..69d8ac9
--- /dev/null
+++ b/board/omap3/overo/u-boot.lds
@@ -0,0 +1,63 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	:
+	{
+		cpu/arm_cortexa8/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	.ARM.extab	: { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+	__exidx_start = .;
+	.ARM.exidx	: { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+	__exidx_end = .;
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/doc/README.omap3 b/doc/README.omap3
index 7ac521f..d788aae 100644
--- a/doc/README.omap3
+++ b/doc/README.omap3
@@ -11,6 +11,8 @@ Currently the following boards are supported:
 
 * OMAP3530 BeagleBoard [2]
 
+* Gumstix Overo [3]
+
 Toolchain
 =========
 
@@ -26,6 +28,11 @@ Build
 make omap3_beagle_config
 make
 
+* Gumstix Overo:
+
+make omap3_overo_config
+make
+
 Custom commands
 ===============
 
@@ -52,7 +59,7 @@ help
 Acknowledgements
 ================
 
-OMAP3 U-Boot is based on U-Boot tar ball [3] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [4] for BeagleBoard and EVM done by
 several TI employees.
 
 Links
@@ -67,6 +74,10 @@ http://www.ti.com/omap35x (broad market)
 
 http://beagleboard.org/
 
-[3] TI OMAP3 U-Boot:
+[3] Gumstix Overo:
+
+http://www.gumstix.net/Overo/
+
+[4] TI OMAP3 U-Boot:
 
 http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
new file mode 100644
index 0000000..dee0417
--- /dev/null
+++ b/include/configs/omap3_overo.h
@@ -0,0 +1,318 @@
+/*
+ * Configuration settings for the Gumstix Overo board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_OVERO		1	/* working with overo */
+
+#include <asm/arch/cpu.h>	/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ		/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+						/* Sector */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
+					115200}
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NAND		/* NAND support			*/
+
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMI		/* iminfo			*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#undef CONFIG_CMD_NFS		/* NFS support			*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
+							/* to access nand */
+#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
+							/* to access nand */
+							/* at CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
+						/* devices */
+#define SECTORSIZE			512
+
+#define NAND_ALLOW_ERASE_ALL
+#define ADDR_COLUMN			1
+#define ADDR_PAGE			2
+#define ADDR_COLUMN_PAGE		3
+
+#define NAND_ChipID_UNKNOWN		0x00
+#define NAND_MAX_FLOORS			1
+#define NAND_MAX_CHIPS			1
+#define NAND_NO_RB			1
+#define CONFIG_SYS_NAND_WP
+
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV		"nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET	0x680000
+#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
+							/* partition */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		5
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS2,115200n8\0" \
+	"videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
+	"videospec=omapfb:vram:2M,vram:4M\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"video=${videospec},mode:${videomode} " \
+		"root=/dev/mmcblk0p2 rw " \
+		"rootfstype=ext3 rootwait\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"video=${videospec},mode:${videomode} " \
+		"root=/dev/mtdblock4 rw " \
+		"rootfstype=jffs2\0" \
+	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"autoscr ${loadaddr}\0" \
+	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} 280000 400000; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmcinit; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE	1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT		"Overo # "
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command */
+						/* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, */
+					/* in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
+								/* address */
+
+/*
+ * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
+ * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ */
+#define V_PVT				7
+
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PVT			V_PVT	/* 2^(pvt+1) */
+#define CONFIG_SYS_HZ			((V_SCLK) / (2 << CONFIG_SYS_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
+						/* one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND		1
+#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
+#define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
+#define CONFIG_ENV_OFFSET		boot_flash_off
+#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
+					CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+#ifndef __ASSEMBLY__
+extern gpmc_csx_t *nand_cs_base;
+extern gpmc_t *gpmc_cfg_base;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+
+#define WRITE_NAND_COMMAND(d, adr)\
+			writel(d, &nand_cs_base->nand_cmd)
+#define WRITE_NAND_ADDRESS(d, adr)\
+			writel(d, &nand_cs_base->nand_adr)
+#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
+#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
+
+/* Other NAND Access APIs */
+#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
+			while (0)
+#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
+			while (0)
+#define NAND_DISABLE_CE(nand)
+#define NAND_ENABLE_CE(nand)
+#define NAND_WAIT_READY(nand)	udelay(10)
+
+#endif				/* __CONFIG_H */
-- 
1.6.0.4.790.gaa14a



More information about the U-Boot mailing list