[U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

Dear Stefan Roese,

In message <200901261047.36562.sr at denx.de> you wrote:
> The following changes since commit 8f86a3636ef88427f880610638e80991adc41896:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Dirk Eibach (2):
>       ppc4xx: Improve DDR autodetect
>       ppc4xx: Add GDsys PowerPC 440 ETX board support.
> 
> Matthias Fuchs (1):
>       ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
> 
> Stefan Roese (1):
>       ppc4xx: Remove compilation warning in gdppc440etc.c
> 
>  MAINTAINERS                           |    1 +
>  MAKEALL                               |    1 +
>  Makefile                              |    3 +
>  board/gdsys/gdppc440etx/Makefile      |   51 +++++
>  board/gdsys/gdppc440etx/config.mk     |   44 +++++
>  board/gdsys/gdppc440etx/gdppc440etx.c |  323 +++++++++++++++++++++++++++++++++
>  board/gdsys/gdppc440etx/init.S        |   75 ++++++++
>  board/gdsys/gdppc440etx/u-boot.lds    |  144 +++++++++++++++
>  cpu/ppc4xx/sdram.c                    |   55 +++++-
>  include/configs/ASH405.h              |    1 -
>  include/configs/CATcenter.h           |    1 -
>  include/configs/CMS700.h              |    1 -
>  include/configs/CPCI2DP.h             |    1 -
>  include/configs/CPCI405.h             |    1 -
>  include/configs/CPCI4052.h            |    1 -
>  include/configs/CPCI405AB.h           |    1 -
>  include/configs/CPCI405DT.h           |    1 -
>  include/configs/DP405.h               |    1 -
>  include/configs/G2000.h               |    1 -
>  include/configs/HH405.h               |    1 -
>  include/configs/HUB405.h              |    1 -
>  include/configs/OCRTC.h               |    1 -
>  include/configs/ORSG.h                |    1 -
>  include/configs/PCI405.h              |    1 -
>  include/configs/PLU405.h              |    1 -
>  include/configs/PMC405.h              |    1 -
>  include/configs/PPChameleonEVB.h      |    1 -
>  include/configs/VOH405.h              |    1 -
>  include/configs/VOM405.h              |    1 -
>  include/configs/WUH405.h              |    1 -
>  include/configs/csb272.h              |    1 -
>  include/configs/csb472.h              |    1 -
>  include/configs/gdppc440etx.h         |  194 ++++++++++++++++++++
>  include/configs/sbc405.h              |    1 -
>  34 files changed, 886 insertions(+), 29 deletions(-)
>  create mode 100644 board/gdsys/gdppc440etx/Makefile
>  create mode 100644 board/gdsys/gdppc440etx/config.mk
>  create mode 100644 board/gdsys/gdppc440etx/gdppc440etx.c
>  create mode 100644 board/gdsys/gdppc440etx/init.S
>  create mode 100644 board/gdsys/gdppc440etx/u-boot.lds
>  create mode 100644 include/configs/gdppc440etx.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To understand a program you must become  both  the  machine  and  the
program.