[U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC2410 board.

[Wolfgang Denk]

Dear "Daniel Schuler",

In message <7909dbcf0812292347x63b36946r7b7feb90dcbb5a6b at mail.gmail.com> you wrote:
> The new SBC-2410A board from Embest now ships with 2MB NOR FLASH,
> for which CONFIG_AMD_LV160 has been defined in include/configs/sbc2410x.h
> 
> This chip is already supported in other architectures, so AMD_ID_LV160B
> has been used as-is in board/sbc2410x/flash.c
> 
> Signed-off-by: Daniel Schuler <dbschuler at gmail.com>
> ---
>  board/sbc2410x/flash.c     |    6 ++++++
>  include/configs/sbc2410x.h |   21 ++++++++++++++-------
>  2 files changed, 20 insertions(+), 7 deletions(-)

Your patch has been corrupted by your mailer which wrapped long lines.

But I also think that's the wrong approach. Instead of spending (or
more precisely wasting) efforts on that old custom flash driver you
should change the code to use the generic CFI driver instead.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Save yourself!  Reboot in 5 seconds!