[U-Boot] Pull request u-boot-blackfin.git

Wolfgang Denk wd at denx.de
Wed Jan 28 21:08:58 CET 2009


Dear Mike Frysinger,

In message <1233167355-5901-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2:
>   Kim Phillips (1):
>         mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-blackfin.git master
> 
> Mike Frysinger (39):
>       Blackfin: add defines to describe active bootrom behavior
>       Blackfin: add bit defines for DDR parts
>       Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
>       Blackfin: set more sane default board config values
>       Blackfin: rename bootm.c to boot.c
>       Blackfin: abort dma_memcpy() for L1 scratchpad
>       Blackfin: split cache handling out of dma_memcpy()
>       Blackfin: minimize time cache is turned off when replacing cplb entries
>       Blackfin: pass --bmode/--initcode when creating ldr
>       Blackfin: dont generate ldrs with --force
>       Blackfin: fix dcache handling when doing dma memcpy's
>       Blackfin: bfin_mac: update port muxing
>       Blackfin: do not init i2c in Blackfin board init
>       Blackfin: implement general support for CONFIG_STATUS_LED
>       Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
>       Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
>       Blackfin: overhaul i2c driver
>       Blackfin: bf533-ezkit: shuffle flash defines a little
>       Blackfin: drop dead/wrong debug code in initdram()
>       Blackfin: bf537-stamp nand: fix more style errors in previous commit
>       Blackfin: tighten up post memory coding style
>       Blackfin: resurrect BF533-STAMP video splash driver
>       Blackfin: punt unused BF533-STAMP definitions
>       Blackfin: set default boot SPI CS for BF538/BF539
>       Blackfin: use common memcpy routine during init
>       Blackfin: respect CONFIG_CLKIN_HALF
>       Blackfin: add portmuxing for UARTs on the BF51x
>       Blackfin: just set SP register directly during init
>       Blackfin: clarify relocation comment during init
>       Blackfin: pass RETX to Linux
>       Blackfin: handle new anomalies with reset
>       Blackfin: support console-over-JTAG
>       Blackfin: allow serial console to be disabled
>       Blackfin: update on-chip ROM API
>       Blackfin: implement real write support for OTP
>       Blackfin: bootldr: implement BF53x/BF56x LDR loader
>       Blackfin: bf533-stamp: rewrite resource swap logic
>       Blackfin: convert old boards to use COBJS-y Makefile style
>       Blackfin: fixup misc warnings such as printf's and missing casts
> 
>  Makefile                                        |    2 +-
>  blackfin_config.mk                              |    4 +
>  board/bf533-ezkit/Makefile                      |    8 +-
>  board/bf533-ezkit/bf533-ezkit.c                 |   23 +-
>  board/bf533-ezkit/flash-defines.h               |    4 +-
>  board/bf533-ezkit/flash.c                       |   10 +-
>  board/bf533-stamp/Makefile                      |   12 +-
>  board/bf533-stamp/bf533-stamp.c                 |   50 +--
>  board/bf533-stamp/bf533-stamp.h                 |    3 -
>  board/bf533-stamp/video.c                       |  167 +++++++++
>  board/bf533-stamp/video.h                       |   25 ++
>  board/bf537-stamp/Makefile                      |   10 +-
>  board/bf537-stamp/bf537-stamp.c                 |   14 +-
>  board/bf537-stamp/nand.c                        |    9 +-
>  board/bf537-stamp/post-memory.c                 |   23 +-
>  board/bf537-stamp/spi_flash.c                   |    8 +-
>  board/bf561-ezkit/Makefile                      |    8 +-
>  board/bf561-ezkit/bf561-ezkit.c                 |   14 +-
>  common/cmd_bootldr.c                            |  135 +++++++-
>  common/cmd_cplbinfo.c                           |    4 +-
>  common/cmd_otp.c                                |  163 +++++++---
>  common/devices.c                                |    3 +
>  cpu/blackfin/Makefile                           |    9 +-
>  cpu/blackfin/cache.S                            |    4 +-
>  cpu/blackfin/cpu.c                              |    6 +
>  cpu/blackfin/i2c.c                              |  428 -----------------------
>  cpu/blackfin/initcode.c                         |    2 +-
>  cpu/blackfin/jtag-console.c                     |  125 +++++++
>  cpu/blackfin/reset.c                            |   20 +-
>  cpu/blackfin/serial.c                           |    4 +
>  cpu/blackfin/serial.h                           |   15 +-
>  cpu/blackfin/start.S                            |   41 +--
>  cpu/blackfin/traps.c                            |   52 +--
>  drivers/i2c/Makefile                            |    1 +
>  drivers/i2c/bfin-twi_i2c.c                      |  285 +++++++++++++++
>  drivers/net/bfin_mac.c                          |   47 ++-
>  include/asm-blackfin/blackfin-config-post.h     |   84 ++++-
>  include/asm-blackfin/blackfin_local.h           |    2 +-
>  include/asm-blackfin/mach-common/bits/bootrom.h |   72 +++--
>  include/asm-blackfin/mach-common/bits/ebiu.h    |   21 +-
>  include/asm-blackfin/mach-common/bits/otp.h     |   21 +-
>  include/configs/bf533-ezkit.h                   |    2 +-
>  include/configs/bf533-stamp.h                   |    2 +-
>  include/configs/bf537-stamp.h                   |   43 +--
>  include/devices.h                               |    3 +
>  include/status_led.h                            |    3 +
>  lib_blackfin/Makefile                           |    2 +-
>  lib_blackfin/board.c                            |   37 +-
>  lib_blackfin/{bootm.c => boot.c}                |   19 +-
>  lib_blackfin/string.c                           |   45 ++-
>  50 files changed, 1270 insertions(+), 824 deletions(-)
>  create mode 100644 board/bf533-stamp/video.c
>  create mode 100644 board/bf533-stamp/video.h
>  delete mode 100644 cpu/blackfin/i2c.c
>  create mode 100644 cpu/blackfin/jtag-console.c
>  create mode 100644 drivers/i2c/bfin-twi_i2c.c
>  rename lib_blackfin/{bootm.c => boot.c} (68%)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hi there! This is just a note from me, to you, to tell you, the  per-
son  reading this note, that I can't think up any more famous quotes,
jokes, nor bizarre stories, so you may as well go home.


More information about the U-Boot mailing list