[U-Boot] [PATCH 10/27] Blackfin: dont check baud if it wont actually get used

[Mike Frysinger]

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 cpu/blackfin/initcode.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index e733dd2..6091f8c 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -61,7 +61,11 @@ static inline uint32_t serial_init(void)
 	}
 #endif
 
-	uint32_t old_baud = serial_early_get_baud();
+	uint32_t old_baud;
+	if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+		old_baud = serial_early_get_baud();
+	else
+		old_baud = CONFIG_BAUDRATE;
 
 	if (BFIN_DEBUG_EARLY_SERIAL) {
 		serial_early_init();
-- 
1.6.1.1