[U-Boot] Reset command on u-boot command line not working

[Ajeesh Kumar]

Hi All,

Reset problem got fixed, actually the reset command isn't doing a full board
reset and just the core was regging resetted.
Now its solved. Thanks a lot.

Thanks,
Ajeesh Kumar

-----Original Message-----
From: Jayakrishnan M [mailto:jay.krishnanm at gmail.com] 
Sent: Tuesday, January 27, 2009 8:35 PM
To: Kumar Gala
Cc: ajeesh at tataelxsi.co.in; u-boot at lists.denx.de
Subject: Re: [U-Boot] Reset command on u-boot command line not working

Dear Ajeesh Kumar,

> Odds are that the reset command isn't doing a full board reset and 
> just resetting the core and thus you are seeing some hang from that.
>
> - k

You may check your board design also. Is HRESET routed to all components on
your board?
Is the switch giving HRESET or triggering any power control IC?

Regards,
Jayakrishnan


The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.