[U-Boot] [PATCHv2 3/3] A320: Add support for Faraday A320 evaluation board

Darius Augulis augulis.darius at gmail.com
Thu Jul 2 10:35:01 CEST 2009


Hi Po-Yu,

On 07/01/2009 02:13 PM, Po-Yu Chuang wrote:
> This patch adds support for A320 development board from Faraday. This board
> uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM.
> FA526 is an ARMv4 processor and uses the ARM920T source in this patch.

It's very interesting. Please find my recent post with patch for 
NAS4220. It has CS3516 SoC with the same(?) FA526 core.
Few comments inline below.


>
> Signed-off-by: Po-Yu Chuang<ratbert at faraday-tech.com>
> ---
>   MAINTAINERS                              |    4 +
>   MAKEALL                                  |    1 +
>   Makefile                                 |    7 +
>   board/faraday/a320/Makefile              |   51 +++++++
>   board/faraday/a320/a320.c                |   64 ++++++++
>   board/faraday/a320/config.mk             |   35 +++++
>   board/faraday/a320/lowlevel_init.S       |  191 ++++++++++++++++++++++++
>   cpu/arm920t/faraday/Makefile             |   46 ++++++
>   cpu/arm920t/faraday/ftsmc020.c           |   52 +++++++
>   cpu/arm920t/faraday/timer.c              |  194 ++++++++++++++++++++++++
>   include/asm-arm/arch-faraday/ftahbc020.h |   71 +++++++++
>   include/asm-arm/arch-faraday/ftpmu010.h  |  190 ++++++++++++++++++++++++
>   include/asm-arm/arch-faraday/ftsdmc020.h |  103 +++++++++++++
>   include/asm-arm/arch-faraday/ftsmc020.h  |   79 ++++++++++
>   include/asm-arm/arch-faraday/fttmr010.h  |   73 +++++++++
>   include/configs/a320.h                   |  239 ++++++++++++++++++++++++++++++
>   16 files changed, 1400 insertions(+), 0 deletions(-)
>   create mode 100644 board/faraday/a320/Makefile
>   create mode 100644 board/faraday/a320/a320.c
>   create mode 100644 board/faraday/a320/config.mk
>   create mode 100644 board/faraday/a320/lowlevel_init.S
>   create mode 100644 cpu/arm920t/faraday/Makefile
>   create mode 100644 cpu/arm920t/faraday/ftsmc020.c
>   create mode 100644 cpu/arm920t/faraday/timer.c
>   create mode 100644 include/asm-arm/arch-faraday/ftahbc020.h
>   create mode 100644 include/asm-arm/arch-faraday/ftpmu010.h
>   create mode 100644 include/asm-arm/arch-faraday/ftsdmc020.h
>   create mode 100644 include/asm-arm/arch-faraday/ftsmc020.h
>   create mode 100644 include/asm-arm/arch-faraday/fttmr010.h
>   create mode 100644 include/configs/a320.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b0e370f..ed41b3a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -680,6 +680,10 @@ Sergey Lapin<slapin at ossfans.org>
>
>   	afeb9260	ARM926EJS (AT91SAM9260 SoC)
>
> +Po-Yu Chuang<ratbert at faraday-tech.com>
> +
> +	a320		FA526 (ARMv4/reuse arm920t source) faraday SoC
> +
>   -------------------------------------------------------------------------
>
>   Unknown / orphaned boards:
> diff --git a/MAKEALL b/MAKEALL
> index 027207d..530a253 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -498,6 +498,7 @@ LIST_ARM7="		\
>   #########################################################################
>
>   LIST_ARM9="			\
> +	a320			\
>   	ap920t			\
>   	ap922_XA10		\
>   	ap926ejs		\
> diff --git a/Makefile b/Makefile
> index 0ae1d36..f99e9d4 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2991,6 +2991,13 @@ B2_config	:	unconfig
>   	@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
>
>   #########################################################################
> +## Faraday A320 Systems
> +#########################################################################
> +
> +a320_config	:	unconfig
> +	@$(MKCONFIG) $(@:_config=) arm arm920t a320 faraday faraday
> +
> +#########################################################################
>   ## ARM720T Systems
>   #########################################################################
>
> diff --git a/board/faraday/a320/Makefile b/board/faraday/a320/Makefile
> new file mode 100644
> index 0000000..ef053c2
> --- /dev/null
> +++ b/board/faraday/a320/Makefile
> @@ -0,0 +1,51 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).a
> +
> +COBJS	:= a320.o
> +SOBJS	:= lowlevel_init.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> +	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/faraday/a320/a320.c b/board/faraday/a320/a320.c
> new file mode 100644
> index 0000000..f9cca4f
> --- /dev/null
> +++ b/board/faraday/a320/a320.c
> @@ -0,0 +1,64 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include<common.h>
> +#include<netdev.h>
> +#include<rtc.h>
> +#include<asm/io.h>
> +
> +#include<asm/arch/ftsmc020.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Miscellaneous platform dependent initialisations
> + */
> +
> +int board_init (void)
> +{
> +	gd->bd->bi_arch_number = MACH_TYPE_FARADAY;
> +
> +	ftsmc020_init ();	/* initialize Flash */
> +	rtc_reset ();		/* enable RTC */
> +	return 0;
> +}
> +
> +int dram_init (void)
> +{
> +	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> +	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
> +
> +	return 0;
> +}
> +
> +int board_eth_init (bd_t * bd)
> +{
> +	return ftmac100_initialize (bd);
> +}
> +
> +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
> +{
> +	if (banknum == 0) {	/* non-CFI boot flash */
> +		info->portwidth = FLASH_CFI_8BIT;
> +		info->chipwidth = FLASH_CFI_BY8;
> +		info->interface = FLASH_CFI_X8;
> +		return 1;
> +	} else
> +		return 0;
> +}
> diff --git a/board/faraday/a320/config.mk b/board/faraday/a320/config.mk
> new file mode 100644
> index 0000000..7573bbd
> --- /dev/null
> +++ b/board/faraday/a320/config.mk
> @@ -0,0 +1,35 @@
> +#
> +# (C) Copyright 2009 Faraday Technology
> +# Po-Yu Chuang<ratbert at faraday-tech.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus
> +#
> +# see http://www.faraday-tech.com/ for more information
> +
> +# A320 has 1 bank of 64 MB DRAM (after remapped)
> +#
> +# 0000'0000 to 0400'0000
> +#
> +# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000
> +#
> +# we load ourself to 03f8'0000
> +#
> +# download area is 0200'0000
> +
> +TEXT_BASE = 0x03f80000

where is your physical DRAM base?
Where does your system boot from? Does it execute code directly from 
Flash memory? I am asking, because CS351x does that very strange: some 
hardware(?) locig copies 2K from Flash base to internal SDRAM, mapped to 
0x0 address. After that it starts execute code from SDRAM.
This caused me to change cpu/arm920t/start.S and make linker script.
You didn't such modifications, so I understand, this is Gemini specific, 
not Faraday FA526 core?


Should be possibility to make something common for your SoC and Gemini 
processors?


> diff --git a/board/faraday/a320/lowlevel_init.S
> b/board/faraday/a320/lowlevel_init.S
> new file mode 100644
> index 0000000..2adb9ef
> --- /dev/null
> +++ b/board/faraday/a320/lowlevel_init.S
> @@ -0,0 +1,191 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include<config.h>
> +#include<version.h>
> +
> +#include<asm/macro.h>
> +#include<asm/arch/ftahbc020.h>
> +#include<asm/arch/ftsdmc020.h>
> +
> +/*
> + * Memory Mapping
> + */
> +#define ROM_DEFAULT_BASE	0x00000000
> +#define SDRAM_DEFAULT_BASE	0x10000000
> +#define SDRAM_REMAPPED_BASE	PHYS_SDRAM_1	/* remap location */
> +
> +/*
> + * parameters for the SDRAM controller
> + */
> +#define TP0_A		CONFIG_SYS_SDMC_BASE + FTSDMC020_OFFSET_TP0
> +#define TP1_A		CONFIG_SYS_SDMC_BASE + FTSDMC020_OFFSET_TP1
> +#define CR_A		CONFIG_SYS_SDMC_BASE + FTSDMC020_OFFSET_CR
> +#define B0_BSR_A	CONFIG_SYS_SDMC_BASE + FTSDMC020_OFFSET_BANK0_BSR
> +#define ACR_A		CONFIG_SYS_SDMC_BASE + FTSDMC020_OFFSET_ACR
> +
> +#define TP0_D		CONFIG_SYS_FTSDMC020_TP0
> +#define TP1_D		CONFIG_SYS_FTSDMC020_TP1
> +#define CR_D1		FTSDMC020_CR_IPREC
> +#define CR_D2		FTSDMC020_CR_ISMR
> +#define CR_D3		FTSDMC020_CR_IREF
> +
> +#define B0_BSR_D1	CONFIG_SYS_FTSDMC020_BANK0_BSR | \
> +			FTSDMC020_BANK_BASE(SDRAM_DEFAULT_BASE)
> +#define B0_BSR_D2	CONFIG_SYS_FTSDMC020_BANK0_BSR | \
> +			FTSDMC020_BANK_BASE(SDRAM_REMAPPED_BASE)
> +#define ACR_D		FTSDMC020_ACR_TOC(0x18)
> +
> +/*
> + * numeric 7 segment display
> + */
> +.macro	led, num
> +	write32	CONFIG_SYS_DEBUG_LED, \num
> +.endm
> +
> +/*
> + * Waiting for SDRAM to set up
> + */
> +.macro	wait_sdram
> +	ldr	r0, =CONFIG_SYS_SDMC_BASE
> +1:
> +	ldr	r1, [r0, #FTSDMC020_OFFSET_CR]
> +	cmp	r1, #0
> +	bne	1b
> +.endm
> +
> +.global reset_cpu
> +reset_cpu:
> +	b	reset_cpu
> +
> +.globl lowlevel_init
> +lowlevel_init:
> +	mov	r11, lr
> +
> +	led	0x0
> +
> +	/* if REMAP bit is set ->  memory had been initialzed */
> +
> +	ldr	r0, =CONFIG_SYS_AHBC_BASE
> +	ldr	r1, [r0, #FTAHBC020_OFFSET_ICR]
> +	tst	r1, #FTAHBC020_ICR_REMAP		@ test REMAP bit
> +	bne	skip_remap
> +
> +	led	0x1
> +
> +	bl	init_sdmc
> +
> +	led	0x2
> +
> +	/*
> +	 * copy U-Boot to RAM
> +	 */
> +copy_code:
> +	ldr	r0, =ROM_DEFAULT_BASE	/* r0<- source address     */
> +	ldr	r1, =SDRAM_DEFAULT_BASE	/* r1<- target address     */
> +
> +	ldr	r2, .LC5
> +	ldr	r3, .LC6
> +	sub	r2, r3, r2		/* r2<- size of armboot            */
> +	add	r2, r0, r2		/* r2<- source end address         */
> +
> +	led	0x3
> +
> +copy_loop:
> +	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
> +	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
> +	cmp	r0, r2			/* until source end addreee [r2]    */
> +	ble	copy_loop
> +
> +	led	0x4

do you really need to repeat reallocation? it is done in start.S...

> +
> +	bl	remap
> +
> +skip_remap:
> +	led	0x5
> +
> +	/* everything is fine now */
> +	mov	lr, r11
> +	mov	pc, lr
> +
> +.LC5:
> +	.word	_start
> +.LC6:
> +	.word	__bss_start
> +
> +/*
> + * memory initialization
> + */
> +init_sdmc:
> +	led	0x10
> +
> +	/* set SDRAM register */
> +
> +	write32	TP0_A, TP0_D
> +	led	0x11
> +
> +	write32	TP1_A, TP1_D
> +	led	0x12
> +
> +	/* set to precharge */
> +	write32	CR_A, CR_D1
> +	led	0x13
> +
> +	wait_sdram
> +	led	0x14
> +
> +	/* set mode register */
> +	write32	CR_A, CR_D2
> +	led	0x15
> +
> +	wait_sdram
> +	led	0x16
> +
> +	/* set to refresh */
> +	write32	CR_A, CR_D3
> +	led	0x17
> +
> +	wait_sdram
> +	led	0x18
> +
> +	write32	B0_BSR_A, B0_BSR_D1
> +	led	0x19
> +
> +	write32	ACR_A, ACR_D
> +	led	0x1a
> +
> +	mov	pc, lr
> +
> +/*
> + * This code will remap the memory ROM and SDRAM
> + * ROM will be placed on 0x80000000 SDRAM will jump to 0x0
> + */

why are you doing this remap?

> +remap:
> +	ldr	r0, =CONFIG_SYS_SDMC_BASE
> +
> +	/* first adjust sdram */
> +	write32	B0_BSR_A, B0_BSR_D2
> +
> +	/* then remap */
> +	ldr	r3, =CONFIG_SYS_AHBC_BASE
> +	ldr	r4, [r3, #FTAHBC020_OFFSET_ICR]
> +	orr	r4, r4, #FTAHBC020_ICR_REMAP		@ Set REMAP bit
> +	str	r4, [r3, #FTAHBC020_OFFSET_ICR]
> +
> +	mov	pc, lr
> diff --git a/cpu/arm920t/faraday/Makefile b/cpu/arm920t/faraday/Makefile
> new file mode 100644
> index 0000000..b879d87
> --- /dev/null
> +++ b/cpu/arm920t/faraday/Makefile
> @@ -0,0 +1,46 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(SOC).a
> +
> +COBJS	+= timer.o
> +COBJS	+= ftsmc020.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
> +
> +all:	$(obj).depend $(LIB)
> +
> +$(LIB):	$(OBJS)
> +	$(AR) $(ARFLAGS) $@ $(OBJS)
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/cpu/arm920t/faraday/ftsmc020.c b/cpu/arm920t/faraday/ftsmc020.c

I think this should go to drivers/net

> new file mode 100644
> index 0000000..cc51cf4
> --- /dev/null
> +++ b/cpu/arm920t/faraday/ftsmc020.c
> @@ -0,0 +1,52 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include<config.h>
> +#include<common.h>
> +#include<asm/io.h>
> +#include<asm/arch/ftsmc020.h>
> +
> +struct ftsmc020_config {
> +	unsigned int	config;
> +	unsigned int	timing;
> +};
> +
> +static struct ftsmc020_config config[] = CONFIG_SYS_FTSMC020_CONFIGS;
> +
> +static volatile struct ftsmc020 *smc = (struct ftsmc020 *)CONFIG_SYS_SMC_BASE;
> +
> +static void ftsmc020_setup_bank (unsigned int bank, struct
> ftsmc020_config *cfg)
> +{
> +	if (bank>  3) {
> +		printf ("bank # %u invalid\n", bank);
> +		return;
> +	}
> +
> +	writel (cfg->config,&smc->bank[bank].cr);
> +	writel (cfg->timing,&smc->bank[bank].tpr);
> +}
> +
> +void ftsmc020_init (void)
> +{
> +	int i;
> +
> +	for (i = 0; i<  ARRAY_SIZE (config); i++) {
> +		ftsmc020_setup_bank (i,&config[i]);
> +	}
> +}
> diff --git a/cpu/arm920t/faraday/timer.c b/cpu/arm920t/faraday/timer.c
> new file mode 100644
> index 0000000..7762012
> --- /dev/null
> +++ b/cpu/arm920t/faraday/timer.c
> @@ -0,0 +1,194 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#undef DEBUG
> +
> +#include<common.h>
> +#include<asm/io.h>
> +#include<asm/arch/ftpmu010.h>
> +#include<asm/arch/fttmr010.h>
> +
> +static ulong timestamp;
> +static ulong lastdec;
> +
> +static volatile struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_SYS_TIMERBASE;
> +static volatile struct ftpmu010 *pmu = (struct ftpmu010
> *)CONFIG_SYS_FTPMU_BASE;
> +
> +#define TIMER_CLOCK	32768
> +#define TIMER_LOAD_VAL	0xffffffff
> +
> +int timer_init (void)
> +{
> +	unsigned int oscc;
> +	unsigned int cr;
> +
> +	debug ("%s()\n", __func__);
> +
> +	/* disable timers */
> +	writel (0,&tmr->cr);
> +
> +	/*
> +	 * use 32768Hz oscillator for RTC, WDT, TIMER
> +	 */
> +
> +	/* enable the 32768Hz oscillator */
> +	oscc = readl (&pmu->OSCC);
> +	oscc&= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI);
> +	writel (oscc,&pmu->OSCC);
> +
> +	/* wait until ready */
> +	while (!(readl (&pmu->OSCC)&  FTPMU010_OSCC_OSCL_STABLE)) ;
> +
> +	/* select 32768Hz oscillator */
> +	oscc = readl (&pmu->OSCC);
> +	oscc |= FTPMU010_RTCLSEL;
> +	writel (oscc,&pmu->OSCC);
> +
> +	/* setup timer */
> +	writel (TIMER_LOAD_VAL,&tmr->timer3_load);
> +	writel (TIMER_LOAD_VAL,&tmr->timer3_counter);
> +	writel (0,&tmr->timer3_match1);
> +	writel (0,&tmr->timer3_match2);
> +
> +	/* we don't want timer to issue interrupts */
> +	writel (FTTMR010_TM3_MATCH1 |
> +		FTTMR010_TM3_MATCH2 |
> +		FTTMR010_TM3_OVERFLOW,
> +		&tmr->interrupt_mask);
> +
> +	cr = readl (&tmr->cr);
> +	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
> +	cr |= FTTMR010_TM3_ENABLE;
> +	writel (cr,&tmr->cr);
> +
> +	/* init the timestamp and lastdec value */
> +	reset_timer_masked ();
> +
> +	return 0;
> +}
> +
> +/*
> + * timer without interrupts
> + */
> +
> +/*
> + * reset time
> + */
> +void reset_timer_masked (void)
> +{
> +	/* capure current decrementer value time */
> +	lastdec = readl (&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
> +	timestamp = 0;		/* start "advancing" time stamp from 0 */
> +
> +	debug ("%s(): lastdec = %lx\n", __func__, lastdec);
> +}
> +
> +void reset_timer (void)
> +{
> +	debug ("%s()\n", __func__);
> +	reset_timer_masked ();
> +}
> +
> +/*
> + * return timer ticks
> + */
> +ulong get_timer_masked (void)
> +{
> +	/* current tick value */
> +	ulong now = readl (&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
> +
> +	debug ("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
> +
> +	if (lastdec>= now) {
> +		/*
> +		 * normal mode (non roll)
> +		 * move stamp fordward with absoulte diff ticks
> +		 */
> +		timestamp += lastdec - now;
> +	} else {
> +		/*
> +		 * we have overflow of the count down timer
> +		 *
> +		 * nts = ts + ld + (TLV - now)
> +		 * ts=old stamp, ld=time that passed before passing through -1
> +		 * (TLV-now) amount of time after passing though -1
> +		 * nts = new "advancing time stamp"...it could also roll and
> +		 * cause problems.
> +		 */
> +		timestamp += lastdec + TIMER_LOAD_VAL - now;
> +	}
> +
> +	lastdec = now;
> +
> +	debug ("%s() returns %lx\n", __func__, timestamp);
> +
> +	return timestamp;
> +}
> +
> +/*
> + * return difference between timer ticks and base
> + */
> +ulong get_timer (ulong base)
> +{
> +	debug ("%s(%lx)\n", __func__, base);
> +	return get_timer_masked () - base;
> +}
> +
> +void set_timer (ulong t)
> +{
> +	debug ("%s(%lx)\n", __func__, t);
> +	timestamp = t;
> +}
> +
> +/* delay x useconds AND perserve advance timstamp value */
> +void udelay (unsigned long usec)
> +{
> +	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
> +	unsigned long now, last = readl(&tmr->timer3_counter);
> +
> +	debug ("%s(%lu)\n", __func__, usec);
> +	while (tmo>  0) {
> +		now = readl(&tmr->timer3_counter);
> +		if (now>  last) /* count down timer overflow */

please check your patch with checkpatch.pl script.
It would warn you about such code style errors.

> +			tmo -= TIMER_LOAD_VAL + last - now;
> +		else
> +			tmo -= last - now;
> +		last = now;
> +	}
> +}
> +
> +/*
> + * This function is derived from PowerPC code (read timebase as long long).
> + * On ARM it just returns the timer value.
> + */
> +unsigned long long get_ticks (void)
> +{
> +	debug ("%s()\n", __func__);
> +	return get_timer (0);
> +}
> +
> +/*
> + * This function is derived from PowerPC code (timebase clock frequency).
> + * On ARM it returns the number of timer ticks per second.
> + */
> +ulong get_tbclk (void)
> +{
> +	debug ("%s()\n", __func__);
> +	return CONFIG_SYS_HZ;
> +}
> diff --git a/include/asm-arm/arch-faraday/ftahbc020.h
> b/include/asm-arm/arch-faraday/ftahbc020.h
> new file mode 100644
> index 0000000..c2e039e
> --- /dev/null
> +++ b/include/asm-arm/arch-faraday/ftahbc020.h
> @@ -0,0 +1,71 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/*
> + * AHB Controller
> + */
> +#ifndef __FTAHBC020_H
> +#define __FTAHBC020_H
> +
> +#define FTAHBC020_OFFSET_SLAVE0_BSR	0x00
> +#define FTAHBC020_OFFSET_SLAVE1_BSR	0x04
> +#define FTAHBC020_OFFSET_SLAVE2_BSR	0x08
> +#define FTAHBC020_OFFSET_SLAVE3_BSR	0x0C
> +#define FTAHBC020_OFFSET_SLAVE4_BSR	0x10
> +#define FTAHBC020_OFFSET_SLAVE5_BSR	0x14
> +#define FTAHBC020_OFFSET_SLAVE6_BSR	0x18
> +#define FTAHBC020_OFFSET_SLAVE7_BSR	0x1C
> +#define FTAHBC020_OFFSET_SLAVE9_BSR	0x24
> +#define FTAHBC020_OFFSET_SLAVE12_BSR	0x30
> +#define FTAHBC020_OFFSET_SLAVE13_BSR	0x34
> +#define FTAHBC020_OFFSET_SLAVE14_BSR	0x38
> +#define FTAHBC020_OFFSET_SLAVE15_BSR	0x3C
> +#define FTAHBC020_OFFSET_SLAVE17_BSR	0x44
> +#define FTAHBC020_OFFSET_SLAVE18_BSR	0x48
> +#define FTAHBC020_OFFSET_SLAVE19_BSR	0x4C
> +#define FTAHBC020_OFFSET_SLAVE21_BSR	0x54
> +#define FTAHBC020_OFFSET_SLAVE22_BSR	0x58
> +#define FTAHBC020_OFFSET_PCR		0x80
> +#define FTAHBC020_OFFSET_TCR		0x84
> +#define FTAHBC020_OFFSET_ICR		0x88
> +
> +/*
> + * AHB Slave n Base/Size Register
> + */
> +#define FTAHBC020_BSR_BASE(x)	((x)&  0xfff00000)
> +
> +#define FTAHBC020_BSR_SIZE_1M	(0x0<<  16)
> +#define FTAHBC020_BSR_SIZE_2M	(0x1<<  16)
> +#define FTAHBC020_BSR_SIZE_4M	(0x2<<  16)
> +#define FTAHBC020_BSR_SIZE_8M	(0x3<<  16)
> +#define FTAHBC020_BSR_SIZE_16M	(0x4<<  16)
> +#define FTAHBC020_BSR_SIZE_32M	(0x5<<  16)
> +#define FTAHBC020_BSR_SIZE_64M	(0x6<<  16)
> +#define FTAHBC020_BSR_SIZE_128M	(0x7<<  16)
> +#define FTAHBC020_BSR_SIZE_256M	(0x8<<  16)
> +#define FTAHBC020_BSR_SIZE_512M	(0x9<<  16)
> +#define FTAHBC020_BSR_SIZE_1G	(0xa<<  16)
> +#define FTAHBC020_BSR_SIZE_2G	(0xb<<  16)
> +
> +/*
> + * AHB Interrupt Control Register
> + */
> +#define FTAHBC020_ICR_REMAP	(1<<  0)
> +
> +#endif	/* __FTAHBC020_H */
> diff --git a/include/asm-arm/arch-faraday/ftpmu010.h
> b/include/asm-arm/arch-faraday/ftpmu010.h
> new file mode 100644
> index 0000000..e365af5
> --- /dev/null
> +++ b/include/asm-arm/arch-faraday/ftpmu010.h
> @@ -0,0 +1,190 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/*
> + * Power Management Unit
> + */
> +#ifndef __FTPMU010_H
> +#define __FTPMU010_H
> +
> +#define FTPMU010_OFFSET_IDNMBR0		0x00
> +#define FTPMU010_OFFSET_OSCC		0x08
> +#define FTPMU010_OFFSET_PMODE		0x0C
> +#define FTPMU010_OFFSET_PMCR		0x10
> +#define FTPMU010_OFFSET_PED		0x14
> +#define FTPMU010_OFFSET_PEDSR		0x18
> +#define FTPMU010_OFFSET_PMSR		0x20
> +#define FTPMU010_OFFSET_PGSR		0x24
> +#define FTPMU010_OFFSET_MFPSR		0x28
> +#define FTPMU010_OFFSET_MISC		0x2C
> +#define FTPMU010_OFFSET_PDLLCR0		0x30
> +#define FTPMU010_OFFSET_PDLLCR1		0x34
> +#define FTPMU010_OFFSET_AHBMCLKOFF	0x38
> +#define FTPMU010_OFFSET_APBMCLKOFF	0x3C
> +#define FTPMU010_OFFSET_DCSRCR0		0x40
> +#define FTPMU010_OFFSET_DCSRCR1		0x44
> +#define FTPMU010_OFFSET_DCSRCR2		0x48
> +#define FTPMU010_OFFSET_SDRAMHTC	0x4C
> +#define FTPMU010_OFFSET_PSPR0		0x50
> +#define FTPMU010_OFFSET_PSPR1		0x54
> +#define FTPMU010_OFFSET_PSPR2		0x58
> +#define FTPMU010_OFFSET_PSPR3		0x5C
> +#define FTPMU010_OFFSET_PSPR4		0x60
> +#define FTPMU010_OFFSET_PSPR5		0x64
> +#define FTPMU010_OFFSET_PSPR6		0x68
> +#define FTPMU010_OFFSET_PSPR7		0x6C
> +#define FTPMU010_OFFSET_PSPR8		0x70
> +#define FTPMU010_OFFSET_PSPR9		0x74
> +#define FTPMU010_OFFSET_PSPR10		0x78
> +#define FTPMU010_OFFSET_PSPR11		0x7C
> +#define FTPMU010_OFFSET_PSPR12		0x80
> +#define FTPMU010_OFFSET_PSPR13		0x84
> +#define FTPMU010_OFFSET_PSPR14		0x88
> +#define FTPMU010_OFFSET_PSPR15		0x8C
> +#define FTPMU010_OFFSET_AHBDMA_RACCS	0x90
> +#define FTPMU010_OFFSET_JSS		0x9C
> +#define FTPMU010_OFFSET_CFC_RACC	0xA0
> +#define FTPMU010_OFFSET_SSP1_RACC	0xA4
> +#define FTPMU010_OFFSET_UART1TX_RACC	0xA8
> +#define FTPMU010_OFFSET_UART1RX_RACC	0xAC
> +#define FTPMU010_OFFSET_UART2TX_RACC	0xB0
> +#define FTPMU010_OFFSET_UART2RX_RACC	0xB4
> +#define FTPMU010_OFFSET_SDC_RACC	0xB8
> +#define FTPMU010_OFFSET_I2SAC97_RACC	0xBC
> +#define FTPMU010_OFFSET_IRDATX_RACC	0xC0
> +#define FTPMU010_OFFSET_USBD_RACC	0xC8
> +#define FTPMU010_OFFSET_IRDARX_RACC	0xCC
> +#define FTPMU010_OFFSET_IRDA_RACC	0xD0
> +#define FTPMU010_OFFSET_ED0_RACC	0xD4
> +#define FTPMU010_OFFSET_ED1_RACC	0xD8
> +
> +struct ftpmu010 {
> +	unsigned int	IDNMBR0;	/* 0x00 */
> +	unsigned int	reserved0;	/* 0x04 */
> +	unsigned int	OSCC;		/* 0x08 */
> +	unsigned int	PMODE;		/* 0x0C */
> +	unsigned int	PMCR;		/* 0x10 */
> +	unsigned int	PED;		/* 0x14 */
> +	unsigned int	PEDSR;		/* 0x18 */
> +	unsigned int	reserved1;	/* 0x1C */
> +	unsigned int	PMSR;		/* 0x20 */
> +	unsigned int	PGSR;		/* 0x24 */
> +	unsigned int	MFPSR;		/* 0x28 */
> +	unsigned int	MISC;		/* 0x2C */
> +	unsigned int	PDLLCR0;	/* 0x30 */
> +	unsigned int	PDLLCR1;	/* 0x34 */
> +	unsigned int	AHBMCLKOFF;	/* 0x38 */
> +	unsigned int	APBMCLKOFF;	/* 0x3C */
> +	unsigned int	DCSRCR0;	/* 0x40 */
> +	unsigned int	DCSRCR1;	/* 0x44 */
> +	unsigned int	DCSRCR2;	/* 0x48 */
> +	unsigned int	SDRAMHTC;	/* 0x4C */
> +	unsigned int	PSPR0;		/* 0x50 */
> +	unsigned int	PSPR1;		/* 0x54 */
> +	unsigned int	PSPR2;		/* 0x58 */
> +	unsigned int	PSPR3;		/* 0x5C */
> +	unsigned int	PSPR4;		/* 0x60 */
> +	unsigned int	PSPR5;		/* 0x64 */
> +	unsigned int	PSPR6;		/* 0x68 */
> +	unsigned int	PSPR7;		/* 0x6C */
> +	unsigned int	PSPR8;		/* 0x70 */
> +	unsigned int	PSPR9;		/* 0x74 */
> +	unsigned int	PSPR10;		/* 0x78 */
> +	unsigned int	PSPR11;		/* 0x7C */
> +	unsigned int	PSPR12;		/* 0x80 */
> +	unsigned int	PSPR13;		/* 0x84 */
> +	unsigned int	PSPR14;		/* 0x88 */
> +	unsigned int	PSPR15;		/* 0x8C */
> +	unsigned int	AHBDMA_RACCS;	/* 0x90 */
> +	unsigned int	reserved2;	/* 0x94 */
> +	unsigned int	reserved3;	/* 0x98 */
> +	unsigned int	JSS;		/* 0x9C */
> +	unsigned int	CFC_RACC;	/* 0xA0 */
> +	unsigned int	SSP1_RACC;	/* 0xA4 */
> +	unsigned int	UART1TX_RACC;	/* 0xA8 */
> +	unsigned int	UART1RX_RACC;	/* 0xAC */
> +	unsigned int	UART2TX_RACC;	/* 0xB0 */
> +	unsigned int	UART2RX_RACC;	/* 0xB4 */
> +	unsigned int	SDC_RACC;	/* 0xB8 */
> +	unsigned int	I2SAC97_RACC;	/* 0xBC */
> +	unsigned int	IRDATX_RACC;	/* 0xC0 */
> +	unsigned int	reserved4;	/* 0xC4 */
> +	unsigned int	USBD_RACC;	/* 0xC8 */
> +	unsigned int	IRDARX_RACC;	/* 0xCC */
> +	unsigned int	IRDA_RACC;	/* 0xD0 */
> +	unsigned int	ED0_RACC;	/* 0xD4 */
> +	unsigned int	ED1_RACC;	/* 0xD8 */
> +};
> +
> +/*
> + * ID Number 0 Register
> + */
> +#define FTPMU010_ID_A320A	0x03200000
> +#define FTPMU010_ID_A320C	0x03200010
> +#define FTPMU010_ID_A320D	0x03200030
> +
> +/*
> + * OSC Control Register
> + */
> +#define FTPMU010_OSCC_OSCH_TRI		(1<<  11)
> +#define FTPMU010_OSCC_OSCH_STABLE	(1<<  9)
> +#define FTPMU010_OSCC_OSCH_OFF		(1<<  8)
> +
> +#define FTPMU010_OSCC_OSCL_TRI		(1<<  3)
> +#define FTPMU010_RTCLSEL		(1<<  2)
> +#define FTPMU010_OSCC_OSCL_STABLE	(1<<  1)
> +#define FTPMU010_OSCC_OSCL_OFF		(1<<  0)
> +
> +/*
> + * Power Mode Register
> + */
> +#define FTPMU010_PMODE_DIVAHBCLK_MASK	(0x7<<  4)
> +#define FTPMU010_PMODE_DIVAHBCLK_2	(0x0<<  4)
> +#define FTPMU010_PMODE_DIVAHBCLK_3	(0x1<<  4)
> +#define FTPMU010_PMODE_DIVAHBCLK_4	(0x2<<  4)
> +#define FTPMU010_PMODE_DIVAHBCLK_6	(0x3<<  4)
> +#define FTPMU010_PMODE_DIVAHBCLK_8	(0x4<<  4)
> +#define FTPMU010_PMODE_FCS		(1<<  2)
> +#define FTPMU010_PMODE_TURBO		(1<<  1)
> +#define FTPMU010_PMODE_SLEEP		(1<<  0)
> +
> +/*
> + * Power Manager Status Register
> + */
> +#define FTPMU010_PMSR_SMR	(1<<  10)
> +
> +#define FTPMU010_PMSR_RDH	(1<<  2)
> +#define FTPMU010_PMSR_PH	(1<<  1)
> +#define FTPMU010_PMSR_CKEHLOW	(1<<  0)
> +
> +/*
> + * Multi-Function Port Setting Register
> + */
> +#define FTPMU010_MFPSR_MODEMPINSEL	(1<<  14)
> +#define FTPMU010_MFPSR_AC97CLKOUTSEL	(1<<  13)
> +#define FTPMU010_MFPSR_AC97PINSEL	(1<<  3)
> +
> +/*
> + * PLL/DLL Control Register 0
> + */
> +#define FTPMU010_PDLLCR0_PLL1NS(x)		(((x)&  0x1ff)<<  3)
> +#define FTPMU010_PDLLCR0_PLL1NS_VALUEOF(reg)	(((reg)>>  3)&  0x1ff)
> +#define FTPMU010_PDLLCR0_PLL1DIS		(1<<  0)
> +
> +#endif	/* __FTPMU010_H */
> diff --git a/include/asm-arm/arch-faraday/ftsdmc020.h
> b/include/asm-arm/arch-faraday/ftsdmc020.h
> new file mode 100644
> index 0000000..0699772
> --- /dev/null
> +++ b/include/asm-arm/arch-faraday/ftsdmc020.h
> @@ -0,0 +1,103 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/*
> + * SDRAM Controller
> + */
> +#ifndef __FTSDMC020_H
> +#define __FTSDMC020_H
> +
> +#define FTSDMC020_OFFSET_TP0		0x00
> +#define FTSDMC020_OFFSET_TP1		0x04
> +#define FTSDMC020_OFFSET_CR		0x08
> +#define FTSDMC020_OFFSET_BANK0_BSR	0x0C
> +#define FTSDMC020_OFFSET_BANK1_BSR	0x10
> +#define FTSDMC020_OFFSET_BANK2_BSR	0x14
> +#define FTSDMC020_OFFSET_BANK3_BSR	0x18
> +#define FTSDMC020_OFFSET_BANK4_BSR	0x1C
> +#define FTSDMC020_OFFSET_BANK5_BSR	0x20
> +#define FTSDMC020_OFFSET_BANK6_BSR	0x24
> +#define FTSDMC020_OFFSET_BANK7_BSR	0x28
> +#define FTSDMC020_OFFSET_ACR		0x34
> +
> +/*
> + * Timing Parametet 0 Register
> + */
> +#define FTSDMC020_TP0_TCL(x)	((x)&  0x3)
> +#define FTSDMC020_TP0_TWR(x)	(((x)&  0x3)<<  4)
> +#define FTSDMC020_TP0_TRF(x)	(((x)&  0xf)<<  8)
> +#define FTSDMC020_TP0_TRCD(x)	(((x)&  0x7)<<  12)
> +#define FTSDMC020_TP0_TRP(x)	(((x)&  0xf)<<  16)
> +#define FTSDMC020_TP0_TRAS(x)	(((x)&  0xf)<<  20)
> +
> +/*
> + * Timing Parametet 1 Register
> + */
> +#define FTSDMC020_TP1_REF_INTV(x)	((x)&  0xffff)
> +#define FTSDMC020_TP1_INI_REFT(x)	(((x)&  0xf)<<  16)
> +#define FTSDMC020_TP1_INI_PREC(x)	(((x)&  0xf)<<  20)
> +
> +/*
> + * Configuration Register
> + */
> +#define FTSDMC020_CR_SREF	(1<<  0)
> +#define FTSDMC020_CR_PWDN	(1<<  1)
> +#define FTSDMC020_CR_ISMR	(1<<  2)
> +#define FTSDMC020_CR_IREF	(1<<  3)
> +#define FTSDMC020_CR_IPREC	(1<<  4)
> +#define FTSDMC020_CR_REFTYPE	(1<<  5)
> +
> +/*
> + * SDRAM External Bank Base/Size Register
> + */
> +#define FTSDMC020_BANK_ENABLE		(1<<  28)
> +
> +#define FTSDMC020_BANK_BASE(addr)	(((addr)>>  20)<<  16)
> +
> +#define FTSDMC020_BANK_DDW_X4		(0<<  12)
> +#define FTSDMC020_BANK_DDW_X8		(1<<  12)
> +#define FTSDMC020_BANK_DDW_X16		(2<<  12)
> +#define FTSDMC020_BANK_DDW_X32		(3<<  12)
> +
> +#define FTSDMC020_BANK_DSZ_16M		(0<<  8)
> +#define FTSDMC020_BANK_DSZ_64M		(1<<  8)
> +#define FTSDMC020_BANK_DSZ_128M		(2<<  8)
> +#define FTSDMC020_BANK_DSZ_256M		(3<<  8)
> +
> +#define FTSDMC020_BANK_MBW_8		(0<<  4)
> +#define FTSDMC020_BANK_MBW_16		(1<<  4)
> +#define FTSDMC020_BANK_MBW_32		(2<<  4)
> +
> +#define FTSDMC020_BANK_SIZE_1M		0x0
> +#define FTSDMC020_BANK_SIZE_2M		0x1
> +#define FTSDMC020_BANK_SIZE_4M		0x2
> +#define FTSDMC020_BANK_SIZE_8M		0x3
> +#define FTSDMC020_BANK_SIZE_16M		0x4
> +#define FTSDMC020_BANK_SIZE_32M		0x5
> +#define FTSDMC020_BANK_SIZE_64M		0x6
> +#define FTSDMC020_BANK_SIZE_128M	0x7
> +#define FTSDMC020_BANK_SIZE_256M	0x8
> +
> +/*
> + * Arbiter Control Register
> + */
> +#define FTSDMC020_ACR_TOC(x)	((x)&  0x1f)
> +#define FTSDMC020_ACR_TOE	(1<<  8)
> +
> +#endif	/* __FTSDMC020_H */
> diff --git a/include/asm-arm/arch-faraday/ftsmc020.h
> b/include/asm-arm/arch-faraday/ftsmc020.h
> new file mode 100644
> index 0000000..43dfa61
> --- /dev/null
> +++ b/include/asm-arm/arch-faraday/ftsmc020.h
> @@ -0,0 +1,79 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/*
> + * Static Memory Controller
> + */
> +#ifndef __FTSMC020_H
> +#define __FTSMC020_H
> +
> +#ifndef __ASSEMBLY__
> +
> +struct ftsmc020 {
> +	struct {
> +		unsigned int	cr;	/* 0x00, 0x08, 0x10, 0x18 */
> +		unsigned int	tpr;	/* 0x04, 0x0c, 0x14, 0x1c */
> +	} bank[4];
> +	unsigned int	pad[8];	/* 0x20 - 0x3c */
> +	unsigned int	ssr;	/* 0x40 */
> +};
> +
> +void ftsmc020_init (void);
> +
> +#endif /* __ASSEMBLY__ */
> +
> +/*
> + * Memory Bank Configuration Register
> + */
> +#define FTSMC020_BANK_ENABLE	(1<<  28)
> +#define FTSMC020_BANK_BASE(x)	((x)&  0x0fff1000)
> +
> +#define FTSMC020_BANK_WPROT	(1<<  11)
> +
> +#define FTSMC020_BANK_SIZE_32K	(0xb<<  4)
> +#define FTSMC020_BANK_SIZE_64K	(0xc<<  4)
> +#define FTSMC020_BANK_SIZE_128K	(0xd<<  4)
> +#define FTSMC020_BANK_SIZE_256K	(0xe<<  4)
> +#define FTSMC020_BANK_SIZE_512K	(0xf<<  4)
> +#define FTSMC020_BANK_SIZE_1M	(0x0<<  4)
> +#define FTSMC020_BANK_SIZE_2M	(0x1<<  4)
> +#define FTSMC020_BANK_SIZE_4M	(0x2<<  4)
> +#define FTSMC020_BANK_SIZE_8M	(0x3<<  4)
> +#define FTSMC020_BANK_SIZE_16M	(0x4<<  4)
> +#define FTSMC020_BANK_SIZE_32M	(0x5<<  4)
> +
> +#define FTSMC020_BANK_MBW_8	(0x0<<  0)
> +#define FTSMC020_BANK_MBW_16	(0x1<<  0)
> +#define FTSMC020_BANK_MBW_32	(0x2<<  0)
> +
> +/*
> + * Memory Bank Timing Parameter Register
> + */
> +#define FTSMC020_TPR_ETRNA(x)	(((x)&  0xf)<<  28)
> +#define FTSMC020_TPR_EATI(x)	(((x)&  0xf)<<  24)
> +#define FTSMC020_TPR_RBE	(1<<  20)
> +#define FTSMC020_TPR_AST(x)	(((x)&  0x3)<<  18)
> +#define FTSMC020_TPR_CTW(x)	(((x)&  0x3)<<  16)
> +#define FTSMC020_TPR_ATI(x)	(((x)&  0xf)<<  12)
> +#define FTSMC020_TPR_AT2(x)	(((x)&  0x3)<<  8)
> +#define FTSMC020_TPR_WTC(x)	(((x)&  0x3)<<  6)
> +#define FTSMC020_TPR_AHT(x)	(((x)&  0x3)<<  4)
> +#define FTSMC020_TPR_TRNA(x)	(((x)&  0xf)<<  0)
> +
> +#endif	/* __FTSMC020_H */
> diff --git a/include/asm-arm/arch-faraday/fttmr010.h
> b/include/asm-arm/arch-faraday/fttmr010.h
> new file mode 100644
> index 0000000..72abcb3
> --- /dev/null
> +++ b/include/asm-arm/arch-faraday/fttmr010.h
> @@ -0,0 +1,73 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +/*
> + * Timer
> + */
> +#ifndef __FTTMR010_H
> +#define __FTTMR010_H
> +
> +struct fttmr010 {
> +	unsigned int	timer1_counter;		/* 0x00 */
> +	unsigned int	timer1_load;		/* 0x04 */
> +	unsigned int	timer1_match1;		/* 0x08 */
> +	unsigned int	timer1_match2;		/* 0x0c */
> +	unsigned int	timer2_counter;		/* 0x10 */
> +	unsigned int	timer2_load;		/* 0x14 */
> +	unsigned int	timer2_match1;		/* 0x18 */
> +	unsigned int	timer2_match2;		/* 0x1c */
> +	unsigned int	timer3_counter;		/* 0x20 */
> +	unsigned int	timer3_load;		/* 0x24 */
> +	unsigned int	timer3_match1;		/* 0x28 */
> +	unsigned int	timer3_match2;		/* 0x2c */
> +	unsigned int	cr;			/* 0x30 */
> +	unsigned int	interrupt_state;	/* 0x34 */
> +	unsigned int	interrupt_mask;		/* 0x38 */
> +};
> +
> +/*
> + * Timer Control Register
> + */
> +#define FTTMR010_TM3_UPDOWN	(1<<  11)
> +#define FTTMR010_TM2_UPDOWN	(1<<  10)
> +#define FTTMR010_TM1_UPDOWN	(1<<  9)
> +#define FTTMR010_TM3_OFENABLE	(1<<  8)
> +#define FTTMR010_TM3_CLOCK	(1<<  7)
> +#define FTTMR010_TM3_ENABLE	(1<<  6)
> +#define FTTMR010_TM2_OFENABLE	(1<<  5)
> +#define FTTMR010_TM2_CLOCK	(1<<  4)
> +#define FTTMR010_TM2_ENABLE	(1<<  3)
> +#define FTTMR010_TM1_OFENABLE	(1<<  2)
> +#define FTTMR010_TM1_CLOCK	(1<<  1)
> +#define FTTMR010_TM1_ENABLE	(1<<  0)
> +
> +/*
> + * Timer Interrupt State&  Mask Registers
> + */
> +#define FTTMR010_TM3_OVERFLOW	(1<<  8)
> +#define FTTMR010_TM3_MATCH2	(1<<  7)
> +#define FTTMR010_TM3_MATCH1	(1<<  6)
> +#define FTTMR010_TM2_OVERFLOW	(1<<  5)
> +#define FTTMR010_TM2_MATCH2	(1<<  4)
> +#define FTTMR010_TM2_MATCH1	(1<<  3)
> +#define FTTMR010_TM1_OVERFLOW	(1<<  2)
> +#define FTTMR010_TM1_MATCH2	(1<<  1)
> +#define FTTMR010_TM1_MATCH1	(1<<  0)
> +
> +#endif	/* __FTTMR010_H */
> diff --git a/include/configs/a320.h b/include/configs/a320.h
> new file mode 100644
> index 0000000..27ca2cd
> --- /dev/null
> +++ b/include/configs/a320.h
> @@ -0,0 +1,239 @@
> +/*
> + * (C) Copyright 2009 Faraday Technology
> + * Po-Yu Chuang<ratbert at faraday-tech.com>
> + *
> + * Configuation settings for the Faraday A320 board.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*-----------------------------------------------------------------------
> + * CPU and Board Configuration Options
> + */
> +#define CONFIG_A320		/* in a Faraday A320 SoC/Board   */
> +
> +#undef CONFIG_USE_IRQ		/* we don't need IRQ/FIQ stuff */
> +
> +#undef CONFIG_SKIP_LOWLEVEL_INIT
> +
> +/*-----------------------------------------------------------------------
> + * Timer
> + */
> +#define CONFIG_SYS_HZ		1000	/* timer ticks per second */
> +#define CONFIG_SYS_TIMERBASE	0x98400000
> +
> +/*-----------------------------------------------------------------------
> + * RTC
> + */
> +#define CONFIG_RTC_FTRTC010
> +#define CONFIG_SYS_RTC_BASE	0x98600000
> +
> +/*-----------------------------------------------------------------------
> + * Serial console configuration
> + */
> +
> +/* FTUART is a high speed NS 16C550A compatible UART */
> +#define CONFIG_BAUDRATE			38400
> +#define CONFIG_CONS_INDEX		1
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_COM1		0x98200000
> +#define CONFIG_SYS_NS16550_REG_SIZE	-4
> +#define CONFIG_SYS_NS16550_CLK		18432000
> +
> +/* valid baudrates */
> +#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
> +
> +/*-----------------------------------------------------------------------
> + * Ethernet
> + */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_DRIVER_FTMAC100
> +#define CONFIG_SYS_MAC100_BASE	0x90900000
> +
> +#define CONFIG_BOOTDELAY	3
> +#define CONFIG_ETHADDR		c3:10:da:ce:3f:3e
> +#define CONFIG_NETMASK		255.255.255.0
> +#define CONFIG_IPADDR		192.168.68.55
> +#define CONFIG_SERVERIP		192.168.68.63
> +
> +/*-----------------------------------------------------------------------
> + * Hardware register bases
> + */
> +#define CONFIG_SYS_AHBC_BASE	0x90100000	/* AHB Controller */
> +#define CONFIG_SYS_SMC_BASE	0x90200000	/* Static Memory Controller */
> +#define CONFIG_SYS_DEBUG_LED	0x902ffffc	/* Debug LED */
> +#define CONFIG_SYS_SDMC_BASE	0x90300000	/* SDRAM Controller */
> +
> +#define CONFIG_SYS_FTPMU_BASE	0x98100000	/* Power Management Unit */
> +
> +/*-----------------------------------------------------------------------
> + * Command line configuration.
> + */
> +#include<config_cmd_default.h>
> +
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DATE
> +#define CONFIG_CMD_PING
> +
> +/*-----------------------------------------------------------------------
> + * Miscellaneous configurable options
> + */
> +#define CONFIG_SYS_LONGHELP			/* undef to save memory */
> +#define CONFIG_SYS_PROMPT	"A320 # "	/* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
> +
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE	\
> +	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> +
> +/* max number of command args */
> +#define CONFIG_SYS_MAXARGS	16
> +
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
> +
> +/*-----------------------------------------------------------------------
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ	(4 * 1024)	/* IRQ stack */
> +#define CONFIG_STACKSIZE_FIQ	(4 * 1024)	/* FIQ stack */
> +#endif
> +
> +/*-----------------------------------------------------------------------
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
> +
> +/*-----------------------------------------------------------------------
> + * size in bytes reserved for initial data
> +*/
> +#define CONFIG_SYS_GBL_DATA_SIZE	128
> +
> +/*-----------------------------------------------------------------------
> + * SDRAM controller configuration
> + */
> +#define CONFIG_SYS_FTSDMC020_TP0	FTSDMC020_TP0_TRAS(2) |	\
> +					FTSDMC020_TP0_TRP(1)  |	\
> +					FTSDMC020_TP0_TRCD(1) |	\
> +					FTSDMC020_TP0_TRF(3)  |	\
> +					FTSDMC020_TP0_TWR(1)  |	\
> +					FTSDMC020_TP0_TCL(2)
> +
> +#define CONFIG_SYS_FTSDMC020_TP1	FTSDMC020_TP1_INI_PREC(4) |	\
> +					FTSDMC020_TP1_INI_REFT(8) |	\
> +					FTSDMC020_TP1_REF_INTV(0x180)
> +
> +#define CONFIG_SYS_FTSDMC020_BANK0_BSR	FTSDMC020_BANK_ENABLE   |	\
> +					FTSDMC020_BANK_DDW_X16  |	\
> +					FTSDMC020_BANK_DSZ_256M |	\
> +					FTSDMC020_BANK_MBW_32   |	\
> +					FTSDMC020_BANK_SIZE_64M
> +
> +/*-----------------------------------------------------------------------
> + * Physical Memory Map
> + */
> +#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
> +#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
> +#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
> +
> +/*
> + * Load address and memory test area should agree with
> + * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself.
> + */
> +#define CONFIG_SYS_LOAD_ADDR		0x02000000
> +
> +/* memtest works on 63 MB in DRAM */
> +#define CONFIG_SYS_MEMTEST_START	0x00000000
> +#define CONFIG_SYS_MEMTEST_END		0x03F00000
> +
> +/*-----------------------------------------------------------------------
> + * Static memory controller configuration
> + */
> +
> +#include<asm/arch/ftsmc020.h>
> +
> +#define FTSMC020_BANK0_CONFIG	(FTSMC020_BANK_ENABLE             |	\
> +				 FTSMC020_BANK_BASE(PHYS_FLASH_1) |	\
> +				 FTSMC020_BANK_SIZE_1M            |	\
> +				 FTSMC020_BANK_MBW_8)
> +
> +#define FTSMC020_BANK0_TIMING	(FTSMC020_TPR_RBE      |	\
> +				 FTSMC020_TPR_AST(3)   |	\
> +				 FTSMC020_TPR_CTW(3)   |	\
> +				 FTSMC020_TPR_ATI(0xf) |	\
> +				 FTSMC020_TPR_AT2(3)   |	\
> +				 FTSMC020_TPR_WTC(3)   |	\
> +				 FTSMC020_TPR_AHT(3)   |	\
> +				 FTSMC020_TPR_TRNA(0xf))
> +
> +#define FTSMC020_BANK1_CONFIG	(FTSMC020_BANK_ENABLE             |	\
> +				 FTSMC020_BANK_BASE(PHYS_FLASH_2) |	\
> +				 FTSMC020_BANK_SIZE_32M           |	\
> +				 FTSMC020_BANK_MBW_32)
> +
> +#define FTSMC020_BANK1_TIMING	(FTSMC020_TPR_AST(3)   |	\
> +				 FTSMC020_TPR_CTW(3)   |	\
> +				 FTSMC020_TPR_ATI(0xf) |	\
> +				 FTSMC020_TPR_AT2(3)   |	\
> +				 FTSMC020_TPR_WTC(3)   |	\
> +				 FTSMC020_TPR_AHT(3)   |	\
> +				 FTSMC020_TPR_TRNA(0xf))
> +
> +#define CONFIG_SYS_FTSMC020_CONFIGS	{			\
> +	{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },	\
> +	{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },	\
> +}
> +
> +/*-----------------------------------------------------------------------
> + * FLASH and environment organization
> + */
> +
> +/* no environments */
> +#define CONFIG_ENV_IS_NOWHERE
> +
> +/* Total Size of Environment Sector */
> +#define CONFIG_ENV_SIZE			0x20000
> +
> +/* use CFI framework */
> +#define CONFIG_SYS_FLASH_CFI
> +#define CONFIG_FLASH_CFI_DRIVER
> +
> +/* support JEDEC */
> +#define CONFIG_FLASH_CFI_LEGACY
> +#define CONFIG_SYS_FLASH_LEGACY_512Kx8
> +
> +#define PHYS_FLASH_1			0x80000000
> +#define PHYS_FLASH_2			0x80400000
> +#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, PHYS_FLASH_2, }
> +
> +#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
> +
> +/* max number of memory banks */
> +#define CONFIG_SYS_MAX_FLASH_BANKS	2
> +
> +/* max number of sectors on one chip */
> +#define CONFIG_SYS_MAX_FLASH_SECT	512
> +
> +#undef CONFIG_SYS_FLASH_EMPTY_INFO
> +
> +#endif	/* __CONFIG_H */



More information about the U-Boot mailing list