[U-Boot] [PATCH/RFC 0/2]: arm: Kirkwood: OpenRD base board support
Prafulla Wadaskar
prafulla at marvell.com
Tue Jul 7 10:35:54 CEST 2009
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Prafulla Wadaskar
> Sent: Friday, July 03, 2009 9:56 AM
> To: Simon Kagstrom; U-Boot ML
> Subject: Re: [U-Boot] [PATCH/RFC 0/2]: arm: Kirkwood: OpenRD
> base board support
>
>
>
> > -----Original Message-----
> > From: u-boot-bounces at lists.denx.de
> > [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Simon Kagstrom
> > Sent: Thursday, July 02, 2009 6:49 PM
> > To: U-Boot ML
> > Subject: [U-Boot] [PATCH/RFC 0/2]: arm: Kirkwood: OpenRD base board
> > support
> >
> > Hello again!
> >
> > These two patches add board support for the OpenRD base board. They
> > are a bit on the RFC-level, but allow me to get a prompt at least.
> > Open
> > issues:
> >
> > - Copyright and author: As you can see, most of the work in the new
> > files comes from Prafullas sheevaplug stuff. Perhaps
> Prafulla should
> > be given as the author here as well?
Dear Simon
I am getting one OpenRD board next week :-)
hopefully we together can provide good u-boot support for this board
Regards..
Prafulla . .
More information about the U-Boot
mailing list