[U-Boot] Please pull u-boot-mpc85xx.git

Wolfgang Denk wd at denx.de
Tue Jul 7 20:54:25 CEST 2009


Dear Kumar Gala,

In message <Pine.LNX.4.64.0907061013140.29717 at localhost.localdomain> you wrote:
> The following changes since commit 3e88337b225bf796f6df21d0a7f591530e9d4ce0:
>   Mike Frysinger (1):
>         Blackfin: move ALL += u-boot.ldr to blackfin_config.mk
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc85xx master
> 
> Kumar Gala (3):
>       86xx: Add CPU_TYPE_ENTRY support
>       8xxx: Fix PCI bus address setup for 36-bit configs
>       fsl: Fix compiler warnings from gcc-4.4 in sys_eeprom code
> 
> Peter Tyser (13):
>       8xxx: Break out DMA code to a common file
>       fsl_dma: Add bitfield definitions for common registers
>       fsl_dma: Use proper I/O access functions
>       fsl_dma: Add support for arbitrarily large transfers
>       fsl_dma: Fix Channel Start bug in dma_check()
>       8xxx: Rename dma_xfer() to dmacpy()
>       fsl_dma: Move dma function prototypes to common header file
>       8xxx: Move dma_init() call to common code
>       fsl_dma: Break out common memory initialization function
>       fsl_dma: Make DMA transactions snoopable
>       86xx: XPedite5170 board support
>       83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references
>       83xx: Add support for fsl_dma driver
> 
> Poonam Aggrwal (2):
>       85xx: Adds GPIO registers to MPC85xx Memory Map.
>       8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors
> 
> Roy Zang (1):
>       85xx: Add pci e1000 Ethernet support for P2020 board
> 
> Timur Tabi (1):
>       fsl_ddr: Fix DDR3 calculation of rank density with 8GB or more
> 
>  MAINTAINERS                               |    1 +
>  MAKEALL                                   |    1 +
>  Makefile                                  |    3 +
>  board/freescale/common/sys_eeprom.c       |    6 +-
>  board/freescale/mpc8360emds/mpc8360emds.c |    4 +-
>  board/freescale/mpc8360erdk/mpc8360erdk.c |    4 +-
>  board/freescale/mpc837xemds/mpc837xemds.c |    4 +-
>  board/freescale/mpc837xerdb/mpc837xerdb.c |    4 +-
>  board/freescale/p2020ds/p2020ds.c         |    3 +-
>  board/keymile/kmeter1/kmeter1.c           |    4 +-
>  board/mpc8540eval/mpc8540eval.c           |   35 +--
>  board/sbc8560/sbc8560.c                   |   33 +--
>  board/xes/xpedite5170/Makefile            |   52 ++
>  board/xes/xpedite5170/config.mk           |   32 ++
>  board/xes/xpedite5170/ddr.c               |  168 +++++++
>  board/xes/xpedite5170/law.c               |   52 ++
>  board/xes/xpedite5170/u-boot.lds          |  132 +++++
>  board/xes/xpedite5170/xpedite5170.c       |  111 +++++
>  common/serial.c                           |    3 +-
>  cpu/mpc83xx/cpu.c                         |   85 ----
>  cpu/mpc83xx/spd_sdram.c                   |   43 +--
>  cpu/mpc85xx/cpu.c                         |   47 --
>  cpu/mpc85xx/cpu_init.c                    |    4 +-
>  cpu/mpc85xx/ddr-gen1.c                    |   33 +--
>  cpu/mpc86xx/cpu.c                         |   88 +---
>  cpu/mpc86xx/cpu_init.c                    |    3 +
>  cpu/mpc8xxx/ddr/ddr3_dimm_params.c        |    2 +-
>  drivers/dma/Makefile                      |    1 +
>  drivers/dma/fsl_dma.c                     |  178 +++++++
>  include/asm-ppc/config.h                  |    8 +
>  include/asm-ppc/fsl_dma.h                 |   90 ++++
>  include/asm-ppc/immap_83xx.h              |   49 +--
>  include/asm-ppc/immap_85xx.h              |   11 +
>  include/asm-ppc/processor.h               |    2 +-
>  include/configs/MPC8572DS.h               |    6 +-
>  include/configs/MPC8641HPCN.h             |    2 +-
>  include/configs/P2020DS.h                 |    7 +-
>  include/configs/PM854.h                   |    1 +
>  include/configs/PM856.h                   |    1 +
>  include/configs/XPEDITE5170.h             |  756 +++++++++++++++++++++++++++++
>  include/mpc83xx.h                         |   16 -
>  include/serial.h                          |    3 +-
>  42 files changed, 1668 insertions(+), 420 deletions(-)
>  create mode 100644 board/xes/xpedite5170/Makefile
>  create mode 100644 board/xes/xpedite5170/config.mk
>  create mode 100644 board/xes/xpedite5170/ddr.c
>  create mode 100644 board/xes/xpedite5170/law.c
>  create mode 100644 board/xes/xpedite5170/u-boot.lds
>  create mode 100644 board/xes/xpedite5170/xpedite5170.c
>  create mode 100644 drivers/dma/fsl_dma.c
>  create mode 100644 include/configs/XPEDITE5170.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If God had wanted us to use the metric system, Jesus would have  had
10 apostles."


More information about the U-Boot mailing list