[U-Boot] [PATCH/RFC 1/2]: arm: Kirkwood: Split PHY-related initialization to a common file

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Simon Kagstrom
> Sent: Wednesday, July 08, 2009 12:14 PM
> To: Jean-Christophe PLAGNIOL-VILLARD
> Cc: U-Boot ML; Ben Warren
> Subject: Re: [U-Boot] [PATCH/RFC 1/2]: arm: Kirkwood: Split 
> PHY-related initialization to a common file
> 
> On Tue, 7 Jul 2009 22:37:53 +0200
> Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> wrote:
> 
> > > + * Written-by: Simon Kagstrom <simon.kagstrom at netinsight.net>
> > > + *
> > as you just move code for an file to an other please let 
> the original 
> > Copyright header
> 
> Yes, sorry about this - I created an empty file with only the 
> headers first. I've had it corrected locally for a while.
> 
> On Tue, 7 Jul 2009 23:36:28 -0700
> Prafulla Wadaskar <prafulla at marvell.com> wrote:
> 
> > > please note if that will be share with non Marvell code 
> this is not 
> > > the right place to store it
> > Hi Jean
> > Some more references for this thread
> > http://lists.denx.de/pipermail/u-boot/2009-July/055413.html
> > http://lists.denx.de/pipermail/u-boot/2009-June/053621.html
> 
> And here I'm a bit uncertain what to do. Obviously we can 
> move it to drivers/net/phy, but Ben seems reluctant to accept 
> that until there is a generic phy framework (?).
> 
> The reason I wanted to move it out of sheevaplug was to be 
> able to reuse it for the OpenRD board, so I moved it to the 
> Marvell/common directory.
There are two more boards with me too - that needs this reuse.
Regards..
Prafulla . .
>