[U-Boot] [PATCH 4/4]: arm: Kirkwood: See to it that sent data is 8-byte aligned

[Stefan Roese]

On Wednesday 08 July 2009 13:05:42 Simon Kagstrom wrote:
> U-boot might use non-8-byte-aligned addresses for sending data, which
> the kwgbe_send doesn't accept (bootp does this for me). This patch
> copies the data to be sent to a temporary buffer if it is non-aligned.
>
> Signed-off-by: Simon Kagstrom <simon.kagstrom at netinsight.net>
> ---
>  drivers/net/kirkwood_egiga.c |   26 ++++++++++++++++++++------
>  1 files changed, 20 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
> index 537343f..24269c1 100644
> --- a/drivers/net/kirkwood_egiga.c
> +++ b/drivers/net/kirkwood_egiga.c
> @@ -481,7 +481,7 @@ static int kwgbe_halt(struct eth_device *dev)
>  	return 0;
>  }
>
> -static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
> +static int kwgbe_send_aligned(struct eth_device *dev, volatile void
> *dataptr, int datasize)
>  {
>  	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
> @@ -489,11 +489,6 @@ static int kwgbe_send(struct eth_device *dev, volatile
> void *dataptr, struct kwgbe_txdesc *p_txdesc = dkwgbe->p_txdesc;
>  	u32 cmd_sts;
>
> -	if ((u32) dataptr & 0x07) {
> -		printf("Err..(%s) xmit dataptr not 64bit aligned\n",
> -			__FUNCTION__);
> -		return -1;
> -	}
>  	p_txdesc->cmd_sts = KWGBE_ZERO_PADDING | KWGBE_GEN_CRC;
>  	p_txdesc->cmd_sts |= KWGBE_TX_FIRST_DESC | KWGBE_TX_LAST_DESC;
>  	p_txdesc->cmd_sts |= KWGBE_BUFFER_OWNED_BY_DMA;
> @@ -522,6 +517,25 @@ static int kwgbe_send(struct eth_device *dev, volatile
> void *dataptr, return 0;
>  }
>
> +static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
> +		      int datasize)
> +{
> +	static u8 __attribute__((aligned(8))) aligned_buf[9000];

I would prefer to malloc such big area's.

And I second Prafulla's comment, that this should be handled by the upper 
network layer.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================