[U-Boot] [PATCH] Coldfire: Consolidate DSPI driver
TsiChung Liew
tsicliew at gmail.com
Wed Jul 8 09:45:56 CEST 2009
Unify both MCF5227x and MCF5445x DSPI driver in CPU to
driver/spi folder for common use.
Signed-off-by: TsiChung Liew <tsicliew at gmail.com>
---
drivers/spi/Makefile | 1 +
drivers/spi/cf_spi.c | 357 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 358 insertions(+), 0 deletions(-)
create mode 100644 drivers/spi/cf_spi.c
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1350f3e..655b1c4 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libspi.a
COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+COBJS-$(CONFIG_CF_SPI) += cf_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
new file mode 100644
index 0000000..722aafc
--- /dev/null
+++ b/drivers/spi/cf_spi.c
@@ -0,0 +1,357 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+#include <asm/immap.h>
+
+struct cf_spi_slave {
+ struct spi_slave slave;
+ uint baudrate;
+ int charbit;
+};
+
+int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout,
+ void *din, ulong flags);
+struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode);
+void cfspi_init(void);
+void cfspi_tx(u32 ctrl, u16 data);
+u16 cfspi_rx(void);
+
+extern void cfspi_port_conf(void);
+extern int cfspi_claim_bus(uint bus, uint cs);
+extern void cfspi_release_bus(uint bus, uint cs);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CF_DSPI)
+/* DSPI specific mode */
+#define SPI_MODE_MOD 0x00200000
+#define SPI_DBLRATE 0x00100000
+
+void cfspi_init(void)
+{
+ volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+ cfspi_port_conf(); /* port configuration */
+
+ dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 |
+ DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
+ DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
+ DSPI_MCR_CRXF | DSPI_MCR_CTXF;
+
+ /* Default setting in platform configuration */
+#ifdef CONFIG_SYS_DSPI_CTAR0
+ dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR1
+ dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR2
+ dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR3
+ dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR4
+ dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR5
+ dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR6
+ dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6;
+#endif
+#ifdef CONFIG_SYS_DSPI_CTAR7
+ dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7;
+#endif
+}
+
+void cfspi_tx(u32 ctrl, u16 data)
+{
+ volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+ while ((dspi->sr & 0x0000F000) >= 4) ;
+
+ dspi->tfr = (ctrl | data);
+}
+
+u16 cfspi_rx(void)
+{
+ volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+ while ((dspi->sr & 0x000000F0) == 0) ;
+
+ return (dspi->rfr & 0xFFFF);
+}
+
+int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout,
+ void *din, ulong flags)
+{
+ struct cf_spi_slave *cfslave = (struct cf_spi_slave *)slave;
+ u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
+ u8 *spi_rd = NULL, *spi_wr = NULL;
+ static u32 ctrl = 0;
+ uint len = bitlen >> 3;
+
+ if (cfslave->charbit == 16) {
+ bitlen >>= 1;
+ spi_wr16 = (u16 *) dout;
+ spi_rd16 = (u16 *) din;
+ } else {
+ spi_wr = (u8 *) dout;
+ spi_rd = (u8 *) din;
+ }
+
+ if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
+ ctrl |= DSPI_TFR_CONT;
+
+ ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16);
+
+ if (len > 1) {
+ int tmp_len = len - 1;
+ while (tmp_len--) {
+ if (dout != NULL) {
+ if (cfslave->charbit == 16)
+ cfspi_tx(ctrl, *spi_wr16++);
+ else
+ cfspi_tx(ctrl, *spi_wr++);
+ cfspi_rx();
+ }
+
+ if (din != NULL) {
+ cfspi_tx(ctrl, 0);
+ if (cfslave->charbit == 16)
+ *spi_rd16++ = cfspi_rx();
+ else
+ *spi_rd++ = cfspi_rx();
+ }
+ }
+
+ len = 1; /* remaining byte */
+ }
+
+ if ((flags & SPI_XFER_END) == SPI_XFER_END)
+ ctrl &= ~DSPI_TFR_CONT;
+
+ if (len) {
+ if (dout != NULL) {
+ if (cfslave->charbit == 16)
+ cfspi_tx(ctrl, *spi_wr16);
+ else
+ cfspi_tx(ctrl, *spi_wr);
+ cfspi_rx();
+ }
+
+ if (din != NULL) {
+ cfspi_tx(ctrl, 0);
+ if (cfslave->charbit == 16)
+ *spi_rd16 = cfspi_rx();
+ else
+ *spi_rd = cfspi_rx();
+ }
+ } else {
+ /* dummy read */
+ cfspi_tx(ctrl, 0);
+ cfspi_rx();
+ }
+
+ return 0;
+}
+
+struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode)
+{
+ /*
+ * bit definition for mode:
+ * bit 31 - 28: Transfer size 3 to 16 bits
+ * 27 - 26: PCS to SCK delay prescaler
+ * 25 - 24: After SCK delay prescaler
+ * 23 - 22: Delay after transfer prescaler
+ * 21 : Allow overwrite for bit 31-22 and bit 20-8
+ * 20 : Double baud rate
+ * 19 - 16: PCS to SCK delay scaler
+ * 15 - 12: After SCK delay scaler
+ * 11 - 8: Delay after transfer scaler
+ * 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
+ */
+ volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ int prescaler[] = { 2, 3, 5, 7 };
+ int scaler[] = {
+ 2, 4, 6, 8,
+ 16, 32, 64, 128,
+ 256, 512, 1024, 2048,
+ 4096, 8192, 16384, 32768
+ };
+ int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0;
+ int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed;
+ u32 bus_setup = 0;
+
+ tmp = (prescaler[3] * scaler[15]);
+ /* Maximum and minimum baudrate it can handle */
+ if ((cfslave->baudrate > (gd->bus_clk >> 1)) ||
+ (cfslave->baudrate < (gd->bus_clk / tmp))) {
+ printf("Exceed baudrate limitation: Max %d - Min %d\n",
+ (int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp));
+ return NULL;
+ }
+
+ /* Activate Double Baud when it exceed 1/4 the bus clk */
+ if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) ||
+ (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
+ bus_setup |= DSPI_CTAR_DBR;
+ dbr = 1;
+ }
+
+ if (mode & SPI_CPOL)
+ bus_setup |= DSPI_CTAR_CPOL;
+ if (mode & SPI_CPHA)
+ bus_setup |= DSPI_CTAR_CPHA;
+ if (mode & SPI_LSB_FIRST)
+ bus_setup |= DSPI_CTAR_LSBFE;
+
+ /* Overwrite default value set in platform configuration file */
+ if (mode & SPI_MODE_MOD) {
+
+ if ((mode & 0xF0000000) == 0)
+ bus_setup |=
+ dspi->ctar[cfslave->slave.bus] & 0x78000000;
+ else
+ bus_setup |= ((mode & 0xF0000000) >> 1);
+
+ /*
+ * Check to see if it is enabled by default in platform
+ * config, or manual setting passed by mode parameter
+ */
+ if (mode & SPI_DBLRATE) {
+ bus_setup |= DSPI_CTAR_DBR;
+ dbr = 1;
+ }
+ bus_setup |= (mode & 0x0FC00000) >> 4; /* PSCSCK, PASC, PDT */
+ bus_setup |= (mode & 0x000FFF00) >> 4; /* CSSCK, ASC, DT */
+ } else
+ bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0);
+
+ cfslave->charbit =
+ ((dspi->ctar[cfslave->slave.bus] & 0x78000000) ==
+ 0x78000000) ? 16 : 8;
+
+ pbrcnt = sizeof(prescaler) / sizeof(int);
+ brcnt = sizeof(scaler) / sizeof(int);
+
+ /* baudrate calculation - to closer value, may not be exact match */
+ for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) {
+ baud_speed = gd->bus_clk / prescaler[i];
+ for (j = 0; j < brcnt; j++) {
+ tmp = (baud_speed / scaler[j]) * (1 + dbr);
+
+ if (tmp > cfslave->baudrate)
+ diff = tmp - cfslave->baudrate;
+ else
+ diff = cfslave->baudrate - tmp;
+
+ if (diff < bestmatch) {
+ bestmatch = diff;
+ best_i = i;
+ best_j = j;
+ }
+ }
+ }
+ bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
+ dspi->ctar[cfslave->slave.bus] = bus_setup;
+
+ return &cfslave->slave;
+}
+#endif /* CONFIG_CF_DSPI */
+
+#ifdef CONFIG_CF_QSPI
+/* 52xx, 53xx */
+#endif /* CONFIG_CF_QSPI */
+
+#ifdef CONFIG_CMD_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
+ return 1;
+ else
+ return 0;
+}
+
+void spi_init_f(void)
+{
+}
+
+void spi_init_r(void)
+{
+}
+
+void spi_init(void)
+{
+ cfspi_init();
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct cf_spi_slave *cfslave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ cfslave = malloc(sizeof(struct cf_spi_slave));
+ if (!cfslave)
+ return NULL;
+
+ cfslave->slave.bus = bus;
+ cfslave->slave.cs = cs;
+ cfslave->baudrate = max_hz;
+
+ /* specific setup */
+ return cfspi_setup_slave(cfslave, mode);
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return cfspi_claim_bus(slave->bus, slave->cs);
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ cfspi_release_bus(slave->bus, slave->cs);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ return cfspi_xfer(slave, bitlen, dout, din, flags);
+}
+#endif /* CONFIG_CMD_SPI */
--
1.5.6.4
More information about the U-Boot
mailing list