[U-Boot] [PATCH 4/4] arm/kirkwood: Add Keymile SUEN3 support

Prafulla Wadaskar prafulla at marvell.com
Thu Jul 9 10:02:42 CEST 2009


 

> -----Original Message-----
> From: Stefan Roese [mailto:sr at denx.de] 
> Sent: Thursday, July 09, 2009 12:54 PM
> To: dk-arm-linux at gmx.de
> Cc: u-boot at lists.denx.de; Prafulla Wadaskar; Ashish Karkare; 
> Prabhanjan Sarnaik
> Subject: Re: [U-Boot] [PATCH 4/4] arm/kirkwood: Add Keymile 
> SUEN3 support
> 
> On Thursday 09 July 2009 09:21:33 Dieter Kiermaier wrote:
> > > On Wednesday 08 July 2009 19:48:19 Prafulla Wadaskar wrote:
> > > > >  MAINTAINERS                       |    1 +
> > > > >  MAKEALL                           |    1 +
> > > > >  Makefile                          |    3 +
> > > > >  board/keymile/suen3/Makefile      |   51 +++++++++
> > > > >  board/keymile/suen3/config.mk     |   25 ++++
> > > > >  board/keymile/suen3/sdramregs.txt |   28 +++++
> > > >
> > > > This file will be of no use until we have proposed 
> bin_dep.sh and 
> > > > doimage utility in place.
> > >
> > > Even without doimage and/or bin_dep.sh in place, I think it makes 
> > > perfect sense to include this SDRAM init file in the board 
> > > directory. Mainly because of two reasons:
> > >
> > > a) Keep bootloader related files in one place (SDRAM init 
> is crucial for
> > >    correct operation)
> > >
> > > b) Keep those files under revision control
> > >
> > > And I don't think that anything really speaks against having this 
> > > file in this place for now.
> > >
> > > But anyway, we should try to get at least your bin_dep.sh 
> > > infrastructure accepter. Or at least restart the 
> discussion about it 
> > > (and probably about doimage as well).
> >
> > I would prefer this, too. If I'm allowed to vote for this :)
> 
> Sure you are. At least if you share my opinion! ;)
Thanks a lot for your support :-)
I will repost these patches soon, (by afternoon)

Regards..
Prafulla . .

> 
> Thanks.
> 
> Best regards,
> Stefan
> 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: 
> office at denx.de 
> =====================================================================
> 


More information about the U-Boot mailing list