[U-Boot] [PATCH 1/2] pxa: add clock for system bus 2 arbiter

[Daniel Mack]

ping?

On Tue, Jun 23, 2009 at 05:30:04PM +0200, Daniel Mack wrote:
> From: Daniel Mack <daniel at caiaq.de>
> To: u-boot at lists.denx.de
> Cc: Daniel Mack <daniel at caiaq.de>
> Subject: [PATCH 1/2] pxa: add clock for system bus 2 arbiter
> Date: Tue, 23 Jun 2009 17:30:04 +0200
> Message-Id: <1245771005-23299-1-git-send-email-daniel at caiaq.de>
> X-Mailer: git-send-email 1.6.3.1
> 
> This clock is needed for systems using the USB2 device unit or the 2d
> graphics accelerator.
> 
> Signed-off-by: Daniel Mack <daniel at caiaq.de>
> ---
>  include/asm-arm/arch-pxa/pxa-regs.h |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
> index 5a0885a..1f81e11 100644
> --- a/include/asm-arm/arch-pxa/pxa-regs.h
> +++ b/include/asm-arm/arch-pxa/pxa-regs.h
> @@ -1952,6 +1952,7 @@ typedef void		(*ExcpHndlr) (void) ;
>  #define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
>  #define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
>  
> +#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
>  #define CKENB_8_1WIRE	((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
>  #define CKENB_7_GPIO	((1 << 7) + 32)	/* GPIO Clock Enable */
>  #define CKENB_6_IRQ	((1 << 6) + 32)	/* Interrupt Controller Clock Enable */
> -- 
> 1.6.3.1
>