[U-Boot] [PATCH v3] remove _IO_BASE and KSEG1ADDR from board configuration files

[Timur Tabi]

Wolfgang, please apply this version of the patch.  Thanks.

On Fri, Jun 19, 2009 at 2:10 PM, Timur Tabi<timur at freescale.com> wrote:
> The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but
> the code that used that macro was removed over a year ago, so board
> configuration files no longer need to define it.
>
> The _IO_BASE macro is also automatically defined to 0 if it isn't already set,
> so there's no need to define that macro either in the board configuration files.
>
> Signed-off-by: Timur Tabi <timur at freescale.com>
> Acked-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> Acked-by: Andy Fleming <afleming at freescale.com>
> Acked-by: Andre Schwarz <andre.schwarz at matrix-vision.de>
> ---
>
> v3: removed the change for PN62.h, which does not have _IO_BASE at 0


-- 
Timur Tabi
Linux kernel developer at Freescale