[U-Boot] [PATCH] flread: new command for reading indirect mapped flashes

[Mike Frysinger]

On Monday 06 July 2009 04:47:41 Stefan Roese wrote:
> On Monday 06 July 2009 10:37:10 Mike Frysinger wrote:
> > On Monday 06 July 2009 03:25:43 Stefan Roese wrote:
> > > On Monday 06 July 2009 09:04:44 Mike Frysinger wrote:
> > > > we would want to avoid ambiguity -- is
> > > > "nor" referring to the nor flashes or is it referring to a partition
> > > > named "nor".
> > >
> > > The first version would refer "nor" as flash type and the 2nd one
> > > "nor0" as a device name from mtdparts/mtdids.
> >
> > so people wouldnt be able to name a mtdpart "nor"
>
> Yes, this doesn't make much sense. It's probably better to only use the 2nd
> approach via the mtdparts/mtdids name.

when mtdparts support is enabled, sure.  the logic could be fairly dynamic -- 
if you give it two args, it is referring to a flash type and a flash #.  if 
you give it one, it defaults to mtdparts if it's enabled.  if no mtdpart 
exists named that way, it falls back to flash type and flash 0.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090710/75c6ede1/attachment.pgp