[U-Boot] [PATCH] Add support for the KwikByte KBOC OMAP35xx board

[Wolfgang Denk]

Dear Dirk Behme,

In message <4A59FBDA.70004 at googlemail.com> you wrote:
> 
> I understood Jean-Christophe that he wants
> 
> board/omap3/<vendor>
> 
> and this is what I doesn't like. At least not for the first board of a 
> company. If they, later, add some additional (OMAP3) boards, moving 
> then to board/omap3/<vendor>/<board_A>/, 

Agred - board/omap3/<vendor> is not acceptable, not for the first
board, nor for any number of boards. If a vendor directory is used,
then ist must go as board/<vendor>

Otherwise we will have the same "<vendor>" directories all over the
place for all processors supported by a vendor - and for some active
board vendors that can be a _lot_.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The first rule of magic is simple. Don't waste your time waving your
hands and hoping when a rock or a club will do."
                                               - McCloctnik the Lucid