[U-Boot] [PATCH V2] ppc4xx: Add 405EP based PMC405DE board
Matthias Fuchs
matthias.fuchs at esd.eu
Wed Jul 15 12:51:25 CEST 2009
Signed-off-by: Matthias Fuchs <matthias.fuchs at esd.eu>
---
MAINTAINERS | 1 +
MAKEALL | 1 +
Makefile | 3 +
board/esd/pmc405de/Makefile | 51 ++++
board/esd/pmc405de/config.mk | 23 ++
board/esd/pmc405de/pmc405de.c | 590 +++++++++++++++++++++++++++++++++++++++++
board/esd/pmc405de/u-boot.lds | 133 +++++++++
include/configs/PMC405DE.h | 373 ++++++++++++++++++++++++++
8 files changed, 1175 insertions(+), 0 deletions(-)
create mode 100644 board/esd/pmc405de/Makefile
create mode 100644 board/esd/pmc405de/config.mk
create mode 100644 board/esd/pmc405de/pmc405de.c
create mode 100644 board/esd/pmc405de/u-boot.lds
create mode 100644 include/configs/PMC405DE.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 575a7ec..484040c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -171,6 +171,7 @@ Matthias Fuchs <matthias.fuchs at esd-electronics.com>
PCI405 PPC405GP
PLU405 PPC405EP
PMC405 PPC405GP
+ PMC405DE PPC405EP
PMC440 PPC440EPx
VOH405 PPC405EP
VOM405 PPC405EP
diff --git a/MAKEALL b/MAKEALL
index 020ff73..f36a5fd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -237,6 +237,7 @@ LIST_4xx=" \
PIP405 \
PLU405 \
PMC405 \
+ PMC405DE \
PMC440 \
PPChameleonEVB \
quad100hd \
diff --git a/Makefile b/Makefile
index 090e645..a5d397b 100644
--- a/Makefile
+++ b/Makefile
@@ -1492,6 +1492,9 @@ PLU405_config: unconfig
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+PMC405DE_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+
PMC440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
diff --git a/board/esd/pmc405de/Makefile b/board/esd/pmc405de/Makefile
new file mode 100644
index 0000000..cec88f1
--- /dev/null
+++ b/board/esd/pmc405de/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+COBJS += ../common/cmd_loadpci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esd/pmc405de/config.mk b/board/esd/pmc405de/config.mk
new file mode 100644
index 0000000..ae855dc
--- /dev/null
+++ b/board/esd/pmc405de/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+TEXT_BASE = 0xFFFC0000
diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c
new file mode 100644
index 0000000..ca26d5c
--- /dev/null
+++ b/board/esd/pmc405de/pmc405de.c
@@ -0,0 +1,590 @@
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs at esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/4xx_pci.h>
+#include <command.h>
+#include <malloc.h>
+
+#define CPLD_VERSION (CONFIG_SYS_CPLD_BASE + 0)
+#define CPLD_VERSION_MASK 0x0f
+#define CPLD_STATUS (CONFIG_SYS_CPLD_BASE + 4)
+#define CPLD_CONTROL (CONFIG_SYS_CPLD_BASE + 8)
+#define CPLD_CONTROL_POSTLED_N 0x01
+#define CPLD_CONTROL_POSTLED_GATE 0x02
+#define CPLD_CONTROL_RESETOUT_N 0x40
+#define CPLD_CONTROL_RESETOUT_N_GATE 0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __ft_board_setup(void *blob, bd_t *bd);
+extern void pll_write(u32 a, u32 b);
+
+static int wait_for_pci_ready_done;
+
+static int is_monarch(void);
+static int pci_is_66mhz(void);
+static int board_revision(void);
+static int cpld_revision(void);
+
+int board_early_init_f(void)
+{
+ u32 pllmr0, pllmr1;
+
+ /*
+ * check M66EN and patch PLB:PCI divider for 66MHz PCI
+ *
+ * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
+ * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
+ * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
+ * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
+ *
+ * finally call pll_write() which will do a chip reset
+ * and never return.
+ */
+ pllmr0 = mfdcr(CPC0_PLLMR0);
+ pllmr1 = mfdcr(CPC0_PLLMR1);
+
+ if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
+ /* fCPU=333MHz, fPLB=111MHz */
+ if (pci_is_66mhz()) {
+ if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) !=
+ PLLMR0_PCI_PLB_DIV_1) {
+ pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) |
+ PLLMR0_PCI_PLB_DIV_1, pllmr1);
+ }
+ } else {
+ if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) !=
+ PLLMR0_PCI_PLB_DIV_2) {
+ pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) |
+ PLLMR0_PCI_PLB_DIV_2, pllmr1);
+ }
+ }
+ } else {
+ /* fCPU=133|266MHz, fPLB=133MHz */
+ if (pci_is_66mhz()) {
+ if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) !=
+ PLLMR0_PCI_PLB_DIV_2) {
+ pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) |
+ PLLMR0_PCI_PLB_DIV_2, pllmr1);
+ }
+ } else {
+ if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) !=
+ PLLMR0_PCI_PLB_DIV_3) {
+ pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) |
+ PLLMR0_PCI_PLB_DIV_3, pllmr1);
+ }
+ }
+ }
+
+ /*
+ * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest prio */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register:
+ * - set ready timeout to 512 ebc-clks -> ca. 15 us
+ * - EBC lines are always driven
+ */
+ mtebc(epcr, 0xa8400000);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ int i;
+
+ if (!is_monarch()) {
+ /* PCI configuration done: release EREADY */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_GPIO_EREADY);
+ out_be32((void*)GPIO0_TCR,
+ in_be32((void*)GPIO0_TCR) | CONFIG_SYS_GPIO_EREADY);
+ }
+
+ /* turn off POST LED */
+ out_8((void*)CPLD_CONTROL,
+ CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
+
+ /* turn on LEDs: RUN, A, B */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) &
+ ~(CONFIG_SYS_GPIO_LEDRUN_N |
+ CONFIG_SYS_GPIO_LEDA_N |
+ CONFIG_SYS_GPIO_LEDB_N));
+
+ for (i=0; i < 200; i++)
+ udelay(1000);
+
+ /* turn off LEDs: A, B */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) |
+ (CONFIG_SYS_GPIO_LEDA_N |
+ CONFIG_SYS_GPIO_LEDB_N));
+
+ return (0);
+}
+
+static int is_monarch(void)
+{
+ if (in_be32((void*)GPIO0_IR) & CONFIG_SYS_GPIO_MONARCH_N)
+ return 0;
+ return 1;
+}
+
+static int pci_is_66mhz(void)
+{
+ if (in_be32((void*)GPIO0_IR) & CONFIG_SYS_GPIO_M66EN)
+ return 1;
+ return 0;
+}
+
+static int board_revision(void)
+{
+ return ((in_be32((void*)GPIO0_IR) & CONFIG_SYS_GPIO_HWREV_MASK) >>
+ CONFIG_SYS_GPIO_HWREV_SHIFT);
+}
+
+static int cpld_revision(void)
+{
+ return ((in_8((void*)CPLD_VERSION) & CPLD_VERSION_MASK));
+}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+ puts("Board: esd GmbH - PMC-CPU/405-DE");
+
+ gd->board_type = board_revision();
+ printf(", Rev 1.%ld, ", gd->board_type);
+
+ if (!is_monarch())
+ puts("non-");
+
+ printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
+ pci_is_66mhz() ? "66" : "33", cpld_revision());
+
+ return 0;
+}
+
+
+static void wait_for_pci_ready(void)
+{
+ int i;
+ char *s = getenv("pcidelay");
+
+ /* only wait once */
+ if (wait_for_pci_ready_done)
+ return;
+
+ /*
+ * We have our own handling of the pcidelay variable.
+ * Using CONFIG_PCI_BOOTDELAY enables pausing for host
+ * and adapter devices. For adapter devices we do not
+ * want this.
+ */
+ if (s) {
+ int ms = simple_strtoul(s, NULL, 10);
+ printf("PCI: Waiting for %d ms\n", ms);
+ for (i=0; i<ms; i++)
+ udelay(1000);
+ }
+
+ if (!(in_be32((void*)GPIO0_IR) & CONFIG_SYS_GPIO_EREADY)) {
+ printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
+ while (1) {
+ if (ctrlc()) {
+ puts("abort\n");
+ break;
+ }
+ if (in_be32((void*)GPIO0_IR) & CONFIG_SYS_GPIO_EREADY) {
+ printf("done\n");
+ break;
+ }
+ }
+ }
+
+ wait_for_pci_ready_done = 1;
+}
+
+/*
+ * Overwrite weak is_pci_host()
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+ char *s;
+
+ if (!is_monarch()) {
+ /*
+ * Overwrite PCI identification when running in
+ * non-monarch mode
+ * This should be moved into pci_target_init()
+ * when it is sometimes available for 405 CPUs
+ */
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_SUBSYSTEM_ID,
+ CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_CLASS_SUB_CODE,
+ CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
+ }
+
+ s = getenv("pciscan");
+ if (s == NULL) {
+ if (is_monarch()) {
+ wait_for_pci_ready();
+ return 1;
+ } else {
+ return 0;
+ }
+ } else {
+ if (!strcmp(s, "yes"))
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Overwrite weak pci_pre_init()
+ *
+ * The default implementation enables the 405EP
+ * internal PCI arbiter. We do not want that
+ * on a PMC module.
+ */
+int pci_pre_init(struct pci_controller *hose)
+{
+ return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+
+ __ft_board_setup(blob, bd);
+
+ /*
+ * Disable PCI in non-monarch mode.
+ */
+ if (!is_monarch()) {
+ rc = fdt_find_and_setprop(blob, "/plb/pci at ec000000", "status",
+ "disabled", sizeof("disabled"), 1);
+ if (rc) {
+ printf("Unable to update property status in PCI node, "
+ "err=%s\n",
+ fdt_strerror(rc));
+ }
+ }
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO0. */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) &
+ ~CONFIG_SYS_GPIO_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO0. */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) |
+ CONFIG_SYS_GPIO_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in_be32((void*)GPIO0_OR) &
+ CONFIG_SYS_GPIO_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
+ if (state < 0) {
+ puts("Query of write access state failed.\n");
+ } else {
+ printf("Write access for device 0x%0x is %sabled.\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR,
+ state ? "en" : "dis");
+ state = 0;
+ }
+ } else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable(
+ CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+ } else {
+ /* Enable write access. */
+ state = eeprom_write_enable(
+ CONFIG_SYS_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0)
+ puts ("Setup of write access state failed.\n");
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+ "Enable / disable / query EEPROM write access",
+ ""
+);
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
+
+int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[])
+{
+ u8 data[0x20];
+ int ret;
+
+ if (argc < 2) {
+ printf("Usage:\nsbe %s\n", cmdtp->help);
+ return -1;
+ }
+
+ memset(data, 0, sizeof(data));
+
+ if (argc > 1) {
+ if (!strcmp(argv[1], "133")) {
+ /*
+ * CPU: 133MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+ printf("Bootstrapping for 133MHz\n");
+ data[0x00] = 0x19;
+ data[0x19] = 0x40;
+ data[0x1a] = 0x12;
+ data[0x1b] = 0x12;
+ data[0x1c] = 0x42;
+ data[0x1d] = 0x3e;
+ } else if (!strcmp(argv[1], "266")) {
+ /*
+ * CPU: 266MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+ printf("Bootstrapping for 266MHz\n");
+ data[0x00] = 0x19;
+ data[0x19] = 0x50;
+ data[0x1a] = 0x22;
+ data[0x1b] = 0x2d;
+ data[0x1c] = 0x42;
+ data[0x1d] = 0x3e;
+ } else if (!strcmp(argv[1], "333")) {
+ /*
+ * CPU: 333MHz
+ * PLB/SDRAM/MAL: 111MHz
+ * OPB: 55MHz
+ * EBC: 55MHz
+ * PCI: 55MHz (111MHz on M66EN=1)
+ */
+ printf("Bootstrapping for 333MHz\n");
+ data[0x00] = 0x19;
+ data[0x19] = 0x60;
+ data[0x1a] = 0x29;
+ data[0x1b] = 0x2d;
+ data[0x1c] = 0x42;
+ data[0x1d] = 0xbe;
+ } else {
+ printf("Usage:\nsbe %s\n", cmdtp->help);
+ return -1;
+ }
+ }
+
+ printf("Writing boot EEPROM ...\n");
+ ret = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0, data, 0x20);
+ ret |= eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0x40, data, 0x20);
+ if (ret)
+ printf("bootstrap_eeprom_write failed\n");
+ else
+ printf("done (dump via 'i2c md 50 0.1 20')\n");
+
+ return 0;
+}
+U_BOOT_CMD(
+ sbe, 2, 0, do_setup_bootstrap_eeprom,
+ "setup bootstrap eeprom",
+ "<cpufreq:133|266|333>"
+);
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+extern env_t *env_ptr;
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u32 pram, nextbase, base;
+ char *v;
+ u32 param;
+ ulong *lptr;
+
+ v = getenv("pram");
+ if (v)
+ pram = simple_strtoul(v, NULL, 10);
+ else {
+ printf("Error: pram undefined. Please define pram in KiB\n");
+ return 1;
+ }
+
+ base = gd->bd->bi_memsize;
+#if defined(CONFIG_LOGBUFFER)
+ base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
+#endif
+ /*
+ * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
+ */
+ param = base - (pram << 10);
+ printf("PARAM: @%08x\n", param);
+ debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);
+
+ /* clear entire PA ram */
+ memset((void*)param, 0, (pram << 10));
+
+ /* reserve 4k for pointer field */
+ nextbase = base - 4096;
+ lptr = (ulong*)(base);
+
+ /*
+ * *(--lptr) = item_size;
+ * *(--lptr) = base - item_base = distance from field top;
+ */
+
+ /* env is first (4k aligned) */
+ nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
+ memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
+ *(--lptr) = CONFIG_ENV_SIZE; /* size */
+ *(--lptr) = base - nextbase; /* offset | type=0 */
+
+ /* free section */
+ *(--lptr) = nextbase - param; /* size */
+ *(--lptr) = (base - param) | 126; /* offset | type=126 */
+
+ /* terminate pointer field */
+ *(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
+ *(--lptr) = 0; /* offset=0 -> terminator */
+ return 0;
+}
+U_BOOT_CMD(
+ painit, 1, 1, do_painit,
+ "prepare PciAccess system",
+ ""
+);
+#endif /* CONFIG_PRAM */
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ out_be32((void*)GPIO0_TCR,
+ in_be32((void*)GPIO0_TCR) | CONFIG_SYS_GPIO_SELFRST_N);
+ return 0;
+}
+U_BOOT_CMD(
+ selfreset, 1, 1, do_selfreset,
+ "assert self-reset# signal",
+ ""
+);
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc > 1) {
+ if (argv[1][0] == '0') {
+ /* assert */
+ printf("PMC-RESETOUT# asserted\n");
+ out_8((void*)CPLD_CONTROL,
+ CPLD_CONTROL_RESETOUT_N_GATE);
+ } else {
+ /* deassert */
+ printf("PMC-RESETOUT# deasserted\n");
+ out_8((void*)CPLD_CONTROL,
+ CPLD_CONTROL_RESETOUT_N |
+ CPLD_CONTROL_RESETOUT_N_GATE);
+ }
+ } else {
+ printf("PMC-RESETOUT# is %s\n",
+ (in_8((void*)CPLD_CONTROL) & CPLD_CONTROL_RESETOUT_N) ?
+ "inactive" : "active");
+ }
+ return 0;
+}
+U_BOOT_CMD(
+ resetout, 2, 1, do_resetout,
+ "assert PMC-RESETOUT# signal",
+ ""
+);
diff --git a/board/esd/pmc405de/u-boot.lds b/board/esd/pmc405de/u-boot.lds
new file mode 100644
index 0000000..8c01016
--- /dev/null
+++ b/board/esd/pmc405de/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
new file mode 100644
index 0000000..e5ef863
--- /dev/null
+++ b/include/configs/PMC405DE.h
@@ -0,0 +1,373 @@
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs at esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_405EP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_TYPES 1 /* support board types */
+
+#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTCOMMAND
+
+#define CONFIG_PREBOOT /* enable preboot variable */
+
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change*/
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_PHY1_ADDR 2 /* 2nd PHY address */
+
+#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_PRAM 0
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */
+
+#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x3000000 /* 1 ... 48 MB in DRAM */
+
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
+#define CONFIG_SYS_BASE_BAUD 691200
+#define CONFIG_UART1_CONSOLE
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * PCI stuff
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+/*
+ * PCI identification
+ */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH
+#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x040e /* Dev ID: Non-Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x040f /* Dev ID: Monarch */
+#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC
+#define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST
+
+#define CONFIG_SYS_PCI_CLASSCODE CONFIG_SYS_PCI_CLASSCODE_MONARCH
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
+
+#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to CPLD, GPIO */
+#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI 1 /* CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max. no. memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per chip */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* erase timeout (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* write timeout (in ms) */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buffered writes (faster) */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* 'E' for empty sector (flinfo) */
+#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xfe000000
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+
+/*
+ * Environment in EEPROM setup
+ */
+#define CONFIG_ENV_IS_IN_EEPROM 1
+#define CONFIG_ENV_OFFSET 0x100
+#define CONFIG_ENV_SIZE 0x700
+
+/*
+ * I2C EEPROM (24W16) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24W16 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_WREN 1
+
+/*
+ * RTC
+ */
+#define CONFIG_RTC_RX8025
+
+/*
+ * External Bus Controller (EBC) Setup
+ * (max. 55MHZ EBC clock)
+ */
+/* Memory Bank 0 (NOR flash) BAS=0xFE0,BS=32MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP 0x03017200
+#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xba000)
+
+/* Memory Bank 1 (CPLD) BAS=0xEF0,BS=16MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_CPLD_BASE 0xef000000
+#define CONFIG_SYS_EBC_PB1AP 0x00800000
+#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_CPLD_BASE | 0x18000)
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
+/* inside SDRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR
+/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes res. for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alt1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
+} \
+}
+
+#define CONFIG_SYS_GPIO_HWREV_MASK (0xf0000000 >> 1) /* GPIO1..4 */
+#define CONFIG_SYS_GPIO_HWREV_SHIFT 27
+#define CONFIG_SYS_GPIO_LEDRUN_N (0x80000000 >> 5) /* GPIO5 */
+#define CONFIG_SYS_GPIO_LEDA_N (0x80000000 >> 6) /* GPIO6 */
+#define CONFIG_SYS_GPIO_LEDB_N (0x80000000 >> 7) /* GPIO7 */
+#define CONFIG_SYS_GPIO_SELFRST_N (0x80000000 >> 8) /* GPIO8 */
+#define CONFIG_SYS_GPIO_EEPROM_WP (0x80000000 >> 9) /* GPIO9 */
+#define CONFIG_SYS_GPIO_MONARCH_N (0x80000000 >> 11) /* GPIO11 */
+#define CONFIG_SYS_GPIO_EREADY (0x80000000 >> 12) /* GPIO12 */
+#define CONFIG_SYS_GPIO_M66EN (0x80000000 >> 13) /* GPIO13 */
+
+/*
+ * Default speed selection (cpu_plb_opb_ebc) in mhz.
+ * This value will be set if iic boot eprom is disabled.
+ */
+#undef CONFIG_SYS_FCPU333MHZ
+#define CONFIG_SYS_FCPU266MHZ
+#undef CONFIG_SYS_FCPU133MHZ
+
+#if defined(CONFIG_SYS_FCPU333MHZ)
+/*
+ * CPU: 333MHz
+ * PLB/SDRAM/MAL: 111MHz
+ * OPB: 55MHz
+ * EBC: 55MHz
+ * PCI: 55MHz (111MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#endif
+
+#if defined(CONFIG_SYS_FCPU266MHZ)
+/*
+ * CPU: 266MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#if defined(CONFIG_SYS_FCPU133MHZ)
+/*
+ * CPU: 133MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_4 | \
+ PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#endif /* __CONFIG_H */
--
1.6.1
More information about the U-Boot
mailing list