[U-Boot] [PATCH] Refresh LZMA-lib to 4.65

rhabarber1848 rhabarber1848 at web.de
Wed Jul 15 16:44:34 CEST 2009


Hi,

the same boot screen with #define DEBUG

> Un-Protecting sectors 8..70 in bank 1
> ............................................................... done
> Un-Protected 63 sectors
> ## Current stack ends at 0x03fa87e8
> *  kernel: default image load address = 0x01000000
> ## Booting kernel from Legacy Image at 01000000 ...
>    Image Name:   Linux LZMA
>    Image Type:   PowerPC Linux Kernel Image (lzma compressed)
>    Data Size:    589824 Bytes = 576 kB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    kernel data at 0x01000040, len = 0x00090000 (589824)
> ## No init Ramdisk
>    ramdisk start = 0x00000000, ramdisk end = 0x00000000
>    Uncompressing Kernel Image ... LZMA: Image address...............
0x1000040
> LZMA: Properties address.......... 0x1000040
> LZMA: Uncompressed size address... 0x1000045
> LZMA: Compressed data address..... 0x100004d
> LZMA: Destination address......... 0x0
> LZMA: Uncompresed size............ 0x184e8c
> LZMA: Compresed size.............. 0x8fffb
> OK
>    kernel loaded at 0x00000000, end = 0x00800000
> ERROR: Failed to allocate 0x200 bytes below 0x800000.
> ERROR with allocation of cmdline
> 
> ## Control returned to monitor - resetting...




More information about the U-Boot mailing list