[U-Boot] [PATCH 3/8] mpc83xx: MPC837XERDB: Add support for FSL eSDHC
Wolfgang Denk
wd at denx.de
Thu Jul 16 22:27:38 CEST 2009
Dear Anton Vorontsov,
In message <20090609202530.GC20493 at oksana.dev.rtsoft.ru> you wrote:
> This patch adds support for eSDHC on MPC837XERDB boards. The WP
> switch doesn't seem to work on RDB boards though, the WP pin is
> always asserted (can see the pin state when it's in GPIO mode).
>
> FSL DR USB and FSL eSDHC are mutually exclusive because of pins
> multiplexing, so user should specify 'esdhc' or 'dr_usb' options
> in the hwconfig environment variable to choose between the
> devices.
>
> p.s.
> Now we're very close to a monitor len limit (196 bytes left using
> gcc-4.2.0), so also increase the monitor len by one sector (64 KB).
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> board/freescale/mpc837xerdb/mpc837xerdb.c | 18 ++++++++++++++++++
> include/configs/MPC837XERDB.h | 18 +++++++++++++++++-
> 2 files changed, 35 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I didn't know it was impossible when I did it."
More information about the U-Boot
mailing list