[U-Boot] [PATCH 3/3] Kirkwood: Sheevaplug: kwimage configuration
Prafulla Wadaskar
prafulla at marvell.com
Sun Jul 19 06:41:37 CEST 2009
> -----Original Message-----
> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com]
> Sent: Sunday, July 19, 2009 2:56 AM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Manas Saksena; Ronen Shitrit;
> Nicolas Pitre; Ashish Karkare; Prabhanjan Sarnaik; Lennert Buijtenhek
> Subject: Re: [U-Boot] [PATCH 3/3] Kirkwood: Sheevaplug:
> kwimage configuration
>
> > +
> > +# Boot Media configurations
> > +BOOT_FROM nand
> > +NAND_ECC_MODE default
> > +NAND_PAGE_SIZE 0x0800
> > +
> > +# SOC registers configuration for initial values using
> bootrom header
> > +extension # Maximum KWBIMAGE_MAX_CONFIG configurations allowed
> > +
> > +# Configure RGMII-0 interface pad voltage to 1.8V 0xFFD100e0
> > +0x1b1b1b9b # DRAM Configuration 0xFFD01400 0x43000c30
> could you give more details about the configs
Dear Jean
I will add details for each configuration
Regards..
Prafulla . .
>
> Best Regards,
> J.
>
More information about the U-Boot
mailing list