[U-Boot] [PATCH 3/3] Remove last remanants of unused CONFIG_I2C_CMD_TREE

[ptyser at xes-inc.com]

From: Peter Tyser <ptyser at xes-inc.com>

Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
 include/configs/P2020DS.h     |    1 -
 include/configs/XPEDITE5170.h |    1 -
 include/configs/aria.h        |    1 -
 include/configs/mecp5123.h    |    1 -
 4 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 676f013..70ab96f 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -412,7 +412,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index 2553293..985b589 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -254,7 +254,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/aria.h b/include/configs/aria.h
index e7e238d..4211113 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -376,7 +376,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SPEED		100000
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index e00859a..1ecae00 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -249,7 +249,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
 #define CONFIG_SYS_I2C_SLAVE		0x7F	/* slave address */
 
-- 
1.6.2-rc2.GIT