[U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030

[Dirk Behme]

Tom wrote:
> Omap2 is still pending.
> I was hoping to help Richard out with this last week but he was on travel.
> 
> There is not much more I think I can do wrt omap2.
> All my targets are omap3.
> The nearest I can find online is the nokia n8xx which uses a another 
> bootloader.
> 
> The options as I see them are.
> 
> 1. Get a pass on omap2 testing
> 2. Rewrite i2c init to have a omap3 specific init
> 3. Hack n8xx and try to convience you the results are reasonable
> 4. Wait for omap2 testing.
> 
> I vote for #1.

Me too.

Dirk

> Heiko Schocher wrote:
>> Hello Wolfgang,
>>
>> Wolfgang Denk wrote:
>>   
>>> In message <1244638432-30893-3-git-send-email-Tom.Rix at windriver.com> Tom Rix wrote:
>>>     
>>>> The TWL4030 supplies many peripheral for OMAP3 boards. These include
>>>> power management, usb and, keyboard.
>>>>
>>>> The product description is found here:
>>>>
>>>> http://focus.ti.com/docs/prod/folders/print/tps65950.html
>>>>
>>>> Product reference document, tps65950.pdf, is found here:
>>>>
>>>> http://www.ti.com/lit/gpn/tps65950
>>>>
>>>> Signed-off-by: Tom Rix <Tom.Rix at windriver.com>
>>>> ---
>>>>  drivers/i2c/Makefile      |    1 +
>>>>  drivers/i2c/twl4030_i2c.c |   37 ++++++++
>>>>  include/twl4030.h         |  221 +++++++++++++++++++++++++++++++++++++++++++++
>>>>  3 files changed, 259 insertions(+), 0 deletions(-)
>>>>  create mode 100644 drivers/i2c/twl4030_i2c.c
>>>>  create mode 100644 include/twl4030.h
>>>>       
>>> I think this is supposed to go through the i2c repo, but I haven't
>>> seen any comments yet. 
>>>     
>>
>> Hmm.. there are responses, see for example:
>>
>> http://lists.denx.de/pipermail/u-boot/2009-June/054086.html
>>
>>   
>>> Can you please check the state of this patch? Thanks in advance.
>>>     
>> Hmm.. it is a little long to follow this ... it ended
>> first here:
>>
>> http://lists.denx.de/pipermail/u-boot/2009-June/054654.html
>>
>> waiting for an Ack that it works on omap2 ...
>>
>> (I Acked the resulting 3 patches, see:
>>  http://lists.denx.de/pipermail/u-boot/2009-June/054585.html
>> )
>>
>> Ah, found one more answer from Tom:
>>
>> http://lists.denx.de/pipermail/u-boot/2009-June/054801.html
>>
>> ended in:
>>
>> http://lists.denx.de/pipermail/u-boot/2009-June/055071.html
>>
>> with a new patchset of 6 patches, starting with:
>> http://lists.denx.de/pipermail/u-boot/2009-June/055072.html
>>
>> but state of omap2 is still pending ... see:
>>
>> http://lists.denx.de/pipermail/u-boot/2009-June/055087.html
>>
>> then Tom wrote, he has setup a git repo, see:
>> http://lists.denx.de/pipermail/u-boot/2009-July/055328.html
>>
>> but I think, the state of the omap2 is pending ... so
>> I (and I think Jean-Christophe also) wait for, that this
>> pending state is going away ...
>>
>> Tom, do you have an update?
>>
>> (added Jean-Christophe to cc:)
>> bye
>> Heiko
>>   
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>