[U-Boot] [PATCH] 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
Kumar Gala
galak at kernel.crashing.org
Tue Jul 21 16:41:51 CEST 2009
The MPC8641HPCN board is capable of swizzling the upper address bit of
the NOR flash we boot out of which creates the concept of "virtual"
banks. This is useful in that we can flash a test of image of u-boot
and reset to one of the virtual banks while still maintaining a
working image in "bank 0".
The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
board/freescale/mpc8641hpcn/mpc8641hpcn.c | 13 +++++++++++--
1 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 7422e6b..d115ce1 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -42,10 +42,19 @@ int board_early_init_f(void)
int checkboard(void)
{
- printf ("Board: MPC8641HPCN, System ID: 0x%02x, "
- "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ u8 vboot;
+
+ printf ("Board: MPC8641HPCN, Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
in8(PIXIS_BASE + PIXIS_PVER));
+
+ vboot = in8(PIXIS_BASE + 0x16);
+ if ((vboot >> 7) & 0x1)
+ printf ("vBank: %d\n", ((vboot >> 6) & 0x1));
+ else
+ puts ("Promjet\n");
+
#ifdef CONFIG_PHYS_64BIT
printf (" 36-bit physical address map\n");
#endif
--
1.6.0.6
More information about the U-Boot
mailing list