[U-Boot] [PATCH] ppc4xx: Replace 4xx lowercase SPR references

Stefan Roese sr at denx.de
Thu Jul 23 09:30:08 CEST 2009


Hi Wolfgang,

Matthias is not available for 2 days, so I'll answer instead.

On Wednesday 22 July 2009 17:42:40 Wolfgang Denk wrote:
> Dear Matthias Fuchs,
>
> In message <200907221727.56402.matthias.fuchs at esd.eu> you wrote:
> > Signed-off-by: Matthias Fuchs <matthias.fuchs at esd.eu>
>
> ..
>
> >  board/esd/pmc440/pmc440.c   |    2 +-
> >  board/mpl/mip405/mip405.c   |    2 +-
> >  board/mpl/pip405/pip405.c   |    2 +-
> >  board/netstal/hcu5/hcu5.c   |    8 +-
> >  board/netstal/hcu5/sdram.c  |    4 +-
> >  board/netstal/mcu25/mcu25.c |    2 +-
> >  cpu/ppc4xx/cpu.c            |    8 +-
> >  cpu/ppc4xx/cpu_init.c       |    2 +-
> >  cpu/ppc4xx/interrupts.c     |   18 ++--
> >  cpu/ppc4xx/speed.c          |    3 +-
> >  cpu/ppc4xx/start.S          |  206
> > +++++++++++++++++++++--------------------- include/asm-ppc/processor.h | 
> >  46 ++++++++++
> >  include/ppc405.h            |   55 ------------
> >  include/ppc440.h            |   93 -------------------
> >  post/cpu/ppc4xx/fpu.c       |    6 +-
> >  15 files changed, 178 insertions(+), 279 deletions(-)
>
> I understand the include/asm-ppc/processor.h changes are in sync with
> the Linux version of this file?

No, it's not in sync with the Linux version. Reason is, that the Linux version 
you are referring to was an very old arch/ppc version. The current 
arch/powerpc version is completely different. No SPRN defines in this file any 
more.

But I'll double check the new defines in processor.h before applying this 
patch.

> If so:
>
> Acked-by: Wolfgang Denk <wd at denx.de>

I hope you don't withdraw your Acked-by now. I would really like to apply this 
patch soon.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list