[U-Boot] [PATCH] Make include/common.h usable by assembler code

[Wolfgang Denk]

Commit 70ebf316 factored out the ROUND() macro into include/common.h,
not realizing that the primary use of this macro on AT91 systems was
in start.S where common.h was not included, and could not be included
because it contains a lot of C code which the assembler doesn't
understand.

This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__"
construct, and then adds an include to cpu/arm926ejs/start.S thus
solving the problem.

Signed-off-by: Wolfgang Denk <wd at denx.de>
---
 cpu/arm926ejs/start.S |    1 +
 include/common.h      |   37 ++++++++++++++++++++-----------------
 2 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 0275b66..8043322 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -32,6 +32,7 @@
 
 
 #include <config.h>
+#include <common.h>
 #include <version.h>
 
 #if defined(CONFIG_OMAP1610)
diff --git a/include/common.h b/include/common.h
index 6e689b2..ee174bb 100644
--- a/include/common.h
+++ b/include/common.h
@@ -27,6 +27,8 @@
 #undef	_LINUX_CONFIG_H
 #define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
 
+#ifndef __ASSEMBLY__		/* put C only stuff in this section */
+
 typedef unsigned char		uchar;
 typedef volatile unsigned long	vu_long;
 typedef volatile unsigned short vu_short;
@@ -105,6 +107,9 @@ typedef volatile unsigned char	vu_char;
 #ifdef CONFIG_BLACKFIN
 #include <asm/blackfin.h>
 #endif
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
 
 #include <part.h>
 #include <flash.h>
@@ -636,11 +641,9 @@ int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
 /*
  * STDIO based functions (can always be used)
  */
-
 /* serial stuff */
 void	serial_printf (const char *fmt, ...)
 		__attribute__ ((format (__printf__, 1, 2)));
-
 /* stdin */
 int	getc(void);
 int	tstc(void);
@@ -660,7 +663,6 @@ void	vprintf(const char *fmt, va_list args);
 /*
  * FILE based functions (can only be used AFTER relocation!)
  */
-
 #define stdin		0
 #define stdout		1
 #define stderr		2
@@ -682,14 +684,26 @@ int	fgetc(int file);
 
 int	pcmcia_init (void);
 
-#ifdef CONFIG_STATUS_LED
-# include <status_led.h>
-#endif
 /*
  * Board-specific Platform code can reimplement show_boot_progress () if needed
  */
 void show_boot_progress(int val);
 
+/* Multicore arch functions */
+#ifdef CONFIG_MP
+int cpu_status(int nr);
+int cpu_reset(int nr);
+int cpu_release(int nr, int argc, char *argv[]);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/* Put only stuff here that the assembler can digest */
+
+#ifdef CONFIG_POST
+#define CONFIG_HAS_POST
+#endif
+
 #ifdef CONFIG_INIT_CRITICAL
 #error CONFIG_INIT_CRITICAL is deprecated!
 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
@@ -705,15 +719,4 @@ void show_boot_progress(int val);
 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
 
-/* Multicore arch functions */
-#ifdef CONFIG_MP
-int cpu_status(int nr);
-int cpu_reset(int nr);
-int cpu_release(int nr, int argc, char *argv[]);
-#endif
-
-#ifdef CONFIG_POST
-#define CONFIG_HAS_POST
-#endif
-
 #endif	/* __COMMON_H_ */
-- 
1.6.0.6