[U-Boot] [PATCH]omap3: bug fix for NOR boot support
Dirk Behme
dirk.behme at googlemail.com
Thu Jul 30 20:55:04 CEST 2009
Penda, Naveen Kumar wrote:
> From: Penda Naveen Kumar<pnaveen at ti.com>
>
> This patch provides bug fix, when omap3 uses nor boot.
>
> Signed-off-by: Penda Naveen Kumar<pnaveen at ti.com>
Makes sense! Most probably not found earlier because most OMAP3 boards
have no NOR.
Acked-by: Dirk Behme <dirk.behme at googlemail.com>
> Index: u-boot/cpu/arm_cortexa8/omap3/lowlevel_init.S
> ===================================================================
> --- u-boot.orig/cpu/arm_cortexa8/omap3/lowlevel_init.S
> +++ u-boot/cpu/arm_cortexa8/omap3/lowlevel_init.S
> @@ -135,19 +135,19 @@ _go_to_speed: .word go_to_speed
> /* these constants need to be close for PIC code */
> /* The Nor has to be in the Flash Base CS0 for this condition to happen */
> flash_cfg1_addr:
> - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
> + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1)
> flash_cfg3_addr:
> - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
> + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3)
> flash_cfg3_val:
> .word STNOR_GPMC_CONFIG3
> flash_cfg4_addr:
> - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
> + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4)
> flash_cfg4_val:
> .word STNOR_GPMC_CONFIG4
> flash_cfg5_val:
> .word STNOR_GPMC_CONFIG5
> flash_cfg5_addr:
> - .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
> + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5)
> pll_ctl_add:
> .word CM_CLKEN_PLL
> pll_div_add1:
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list