[U-Boot] [PATCH 1/8] video: add amba-clcd prime-cell
Alessandro Rubini
rubini-list at gnudd.com
Fri Oct 9 13:16:50 CEST 2009
From: Alessandro Rubini <rubini at unipv.it>
Signed-off-by: Alessandro Rubini <rubini at unipv.it>
Acked-by: Andrea Gallo <andrea.gallo at stericsson.com>
---
drivers/video/Makefile | 1 +
drivers/video/amba.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++
include/amba_clcd.h | 85 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/amba.c
create mode 100644 include/amba_clcd.h
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index bb6b5a0..a5e339a 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
+COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
diff --git a/drivers/video/amba.c b/drivers/video/amba.c
new file mode 100644
index 0000000..ebb9aca
--- /dev/null
+++ b/drivers/video/amba.c
@@ -0,0 +1,86 @@
+/*
+ * Driver for AMBA PrimeCell CLCD
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <lcd.h>
+#include <amba_clcd.h>
+
+/* These variables are required by lcd.c -- although it sets them by itself */
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+void *lcd_base;
+void *lcd_console_address;
+short console_col;
+short console_row;
+
+/*
+ * To use this driver you need to provide the following in board files:
+ * a panel_info definition
+ * an lcd_enable function (can't define a weak default with current code)
+ */
+
+/* There is nothing to do with color registers, we use true color */
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+ printf("%s:%s - %i %i %i %i\n", __FILE__, __func__,
+ regno, red, green, blue);
+ return;
+}
+
+/* Low level initialization of the logic cell: depends on panel_info */
+void lcd_ctrl_init(void *lcdbase)
+{
+ struct clcd_regs *regval;
+ void *regs;
+ u32 cntl;
+
+ printf("%s:%s\n", __FILE__, __func__);
+
+ regval = panel_info.priv;
+ regs = (void *)NOMADIK_CLCDC_BASE;
+ cntl = regval->cntl & ~CNTL_LCDEN;
+ printf("%s:%s -- t0 %x t1 %x \n", __FILE__, __func__,
+ regval->tim0, regval->tim1);
+
+ /* Lazily, just copy the registers over: first control with no ena */
+ writel(cntl, regs + CLCD_CNTL);
+ writel(regval->tim0, regs + CLCD_TIM0);
+ writel(regval->tim1, regs + CLCD_TIM1);
+ writel(regval->tim2, regs + CLCD_TIM2);
+ writel(regval->tim3, regs + CLCD_TIM3);
+ writel((u32)lcdbase, regs + CLCD_UBAS);
+ /* finally, enable */
+ writel(cntl | CNTL_LCDEN, regs + CLCD_CNTL);
+}
+
+/* This is trivial, and copied from atmel_lcdfb.c */
+ulong calc_fbsize(void)
+{
+ printf("%s:%s\n", __FILE__, __func__);
+ return ((panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+
+}
diff --git a/include/amba_clcd.h b/include/amba_clcd.h
new file mode 100644
index 0000000..f72062b
--- /dev/null
+++ b/include/amba_clcd.h
@@ -0,0 +1,85 @@
+/*
+ * Register definitions for the AMBA CLCD logic cell.
+ *
+ * derived from David A Rusling:
+ * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+#define CLCD_TIM0 0x00000000
+#define CLCD_TIM1 0x00000004
+#define CLCD_TIM2 0x00000008
+#define CLCD_TIM3 0x0000000c
+#define CLCD_UBAS 0x00000010
+#define CLCD_LBAS 0x00000014
+
+#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
+#define CLCD_IENB 0x00000018
+#define CLCD_CNTL 0x0000001c
+#else
+/*
+ * Someone rearranged these two registers on the Versatile
+ * platform...
+ */
+#define CLCD_IENB 0x0000001c
+#define CLCD_CNTL 0x00000018
+#endif
+
+#define CLCD_STAT 0x00000020
+#define CLCD_INTR 0x00000024
+#define CLCD_UCUR 0x00000028
+#define CLCD_LCUR 0x0000002C
+#define CLCD_PALL 0x00000200
+#define CLCD_PALETTE 0x00000200
+
+#define TIM2_CLKSEL (1 << 5)
+#define TIM2_IVS (1 << 11)
+#define TIM2_IHS (1 << 12)
+#define TIM2_IPC (1 << 13)
+#define TIM2_IOE (1 << 14)
+#define TIM2_BCD (1 << 26)
+
+#define CNTL_LCDEN (1 << 0)
+#define CNTL_LCDBPP1 (0 << 1)
+#define CNTL_LCDBPP2 (1 << 1)
+#define CNTL_LCDBPP4 (2 << 1)
+#define CNTL_LCDBPP8 (3 << 1)
+#define CNTL_LCDBPP16 (4 << 1)
+#define CNTL_LCDBPP16_565 (6 << 1)
+#define CNTL_LCDBPP24 (5 << 1)
+#define CNTL_LCDBW (1 << 4)
+#define CNTL_LCDTFT (1 << 5)
+#define CNTL_LCDMONO8 (1 << 6)
+#define CNTL_LCDDUAL (1 << 7)
+#define CNTL_BGR (1 << 8)
+#define CNTL_BEBO (1 << 9)
+#define CNTL_BEPO (1 << 10)
+#define CNTL_LCDPWR (1 << 11)
+#define CNTL_LCDVCOMP(x) ((x) << 12)
+#define CNTL_LDMAFIFOTIME (1 << 15)
+#define CNTL_WATERMARK (1 << 16)
+
+/* raw information */
+struct clcd_regs {
+ u32 tim0;
+ u32 tim1;
+ u32 tim2;
+ u32 tim3;
+ u32 cntl;
+ unsigned long pixclock;
+};
+
+/* split up information -- yet to be used */
+struct clcd_params {
+ int left_margin, right_margin, upper_margin, lower_margin;
+ int hsync_len, vsync_len;
+ int sync, vmode;
+};
--
1.6.0.2
More information about the U-Boot
mailing list