[U-Boot] [PATCH v3 3/3] ppc/p1_p2_RDB: DDR Relocation supportfor NAND/SD/eSPI Boot

[Scott Wood]

Dudhat Dipen-B09055 wrote:
> 
> -----Original Message-----
> From: Wood Scott-B07421 
> Sent: Friday, October 09, 2009 11:48 PM
> To: Dudhat Dipen-B09055
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH v3 3/3] ppc/p1_p2_RDB: DDR Relocation
> supportfor NAND/SD/eSPI Boot
> 
> On Fri, Oct 09, 2009 at 11:12:04PM +0530, Dipen Dudhat wrote:
>> DDR support to boot from NAND/eSDHC/eSPI on P1 & P2 RDB platforms.
>> Specifically this support needed when L2 Cache size is less than 512K.
> 
> If you're going to use this for eSDHC and eSPI, why is it sitting under
> nand_spl?
> 
> To initialize DDR and create LAW in 4K nand_spl code.
> Basically this patch adds support of DDR for NAND/eSDHC/eSPI boot on top
> of L2 cache support on P1 and P2 RDB Platforms.
> 
> So do I need to split this patch in two parts?? For NAND and
> eSDHC/eSPI??

My point is that the DDR stuff is not specific to NAND, it applies to several 
different boot mechanisms.  So just put it the normal board directory.

-Scott