[U-Boot] [PATCH-ARM 1/4, v3] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code

[Minkyu Kang]

Dear kevin.morfitt

2009/10/10 kevin.morfitt at fearnside-systems.co.uk
<kevin.morfitt at fearnside-systems.co.uk>:
> This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in
> preparation for changes to add support for the Embest SBC2440-II Board.
>
> The changes are as follows:
> - re-indent the code using Lindent
> - make sure register layouts are defined using a C struct
> - replace the upper-case typedef'ed C struct names with lower case
>  non-typedef'ed ones
> - make sure registers are accessed using the proper accessor functions
> - run checkpatch.pl and fix any error reports
>
> It assumes the following patch has been applied first:
> - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
>
> Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
> any s3c2400 or s3c2410 boards but need this patch applying before I can submit
> patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
> new warnings or errors were found.
>
> Signed-off-by: Kevin Morfitt <kevin.morfitt at fearnside-systems.co.uk>
> ---
>
> Changes in v2: re-formatted patch to remove line wrapping
> Changes in v3: removed checkpatch.pl errors
>               moved change log
>
>  cpu/arm920t/s3c24x0/interrupts.c |    4 +-
>  cpu/arm920t/s3c24x0/speed.c      |   42 +-
>  cpu/arm920t/s3c24x0/timer.c      |   74 ++-
>  cpu/arm920t/s3c24x0/usb.c        |   30 +-
>  cpu/arm920t/s3c24x0/usb_ohci.c   | 1323 ++++++++++++++++++++------------------
>  cpu/arm920t/s3c24x0/usb_ohci.h   |  209 +++---
>  cpu/arm920t/start.S              |   63 +-
>  7 files changed, 915 insertions(+), 830 deletions(-)
>

applied to u-boot-samsung

Thanks
Minkyu Kang
-- 
from. prom.
www.promsoft.net