[U-Boot] Relocation size penalty calculation
Graeme Russ
graeme.russ at gmail.com
Wed Oct 14 13:48:27 CEST 2009
On Wed, Oct 14, 2009 at 6:25 PM, Joakim Tjernlund
<joakim.tjernlund at transmode.se> wrote:
> "J. William Campbell" <jwilliamcampbell at comcast.net> wrote on 14/10/2009 01:48:52:
>>
>> Joakim Tjernlund wrote:
>> > Graeme Russ <graeme.russ at gmail.com> wrote on 13/10/2009 22:06:56:
>> >
>> >
>> >> On Tue, Oct 13, 2009 at 10:53 PM, Joakim Tjernlund
>> >> <joakim.tjernlund at transmode.se> wrote:
>> >>
>> >>> Graeme Russ <graeme.russ at gmail.com> wrote on 13/10/2009 13:21:05:
>> >>>
>> >>>> On Sun, Oct 11, 2009 at 11:51 PM, Joakim Tjernlund
>> >>>> <joakim.tjernlund at transmode.se> wrote:
>> >>>>
>> >>>>> Graeme Russ <graeme.russ at gmail.com> wrote on 11/10/2009 12:47:19:
>> >>>>>
>> >>>> [Massive Snip :)]
>> >>>>
>> >>>>
>> >>>>>> So, all that is left are .dynsym and .dynamic ...
>> >>>>>> .dynsym
>> >>>>>> - Contains 70 entries (16 bytes each, 1120 bytes)
>> >>>>>> - 44 entries mimic those entries in .got which are not relocated
>> >>>>>> - 21 entries are the remaining symbols exported from the linker
>> >>>>>> script
>> >>>>>> - 4 entries are labels defined in inline asm and used in C
>> >>>>>>
>> >>>>> Try adding proper asm declarations. Look at what gcc
>> >>>>> generates for a function/variable and mimic these.
>> >>>>>
>> >>>> Thanks - Now .dynsym contains only exports from the linker script
>> >>>>
>> >>> :)
>> >>>
>> >>>>>> - 1 entry is a NULL entry
>> >>>>>>
>> >>>>>> .dynamic
>> >>>>>> - 88 bytes
>> >>>>>> - Array of Elf32_Dyn
>> >>>>>> - typedef struct {
>> >>>>>> Elf32_Sword d_tag;
>> >>>>>> union {
>> >>>>>> Elf32_Word d_val;
>> >>>>>> Elf32_Addr d_ptr;
>> >>>>>> } d_un;
>> >>>>>> } Elf32_Dyn;
>> >>>>>> - 0x11 entries
>> >>>>>> [00] 0x00000010, 0x00000000 DT_SYMBOLIC, (ignored)
>> >>>>>> [01] 0x00000004, 0x38059994 DT_HASH, points to .hash
>> >>>>>> [02] 0x00000005, 0x380595AB DT_STRTAB, points to .dynstr
>> >>>>>> [03] 0x00000006, 0x3805BDCC DT_SYMTAB, points to .dynsym
>> >>>>>> [04] 0x0000000A, 0x000003E6 DT_STRSZ, size of .dynstr
>> >>>>>> [05] 0x0000000B, 0x00000010 DT_SYMENT, ???
>> >>>>>> [06] 0x00000015, 0x00000000 DT_DEBUG, ???
>> >>>>>> [07] 0x00000011, 0x3805A8F4 DT_REL, points to .rel.text
>> >>>>>> [08] 0x00000012, 0x000014D8 DT_RELSZ, ???
>> >>>>>>
>> >>>>> How big DT_REL is
>> >>>>>
>> >>>>>> [09] 0x00000013, 0x00000008 DT_RELENT, ???
>> >>>>>>
>> >>>>> hmm, cannot remeber :)
>> >>>>>
>> >>>> How big an entry in DT_REL is
>> >>>>
>> >>> Right, how could I forget :)
>> >>>
>> >>>>>> [0a] 0x00000016, 0x00000000 DT_TEXTREL, ???
>> >>>>>>
>> >>>>> Oops, you got text relocations. This is generally a bad thing.
>> >>>>> TEXTREL is commonly caused by asm code that arent truly pic so it needs
>> >>>>> to modify the .text segment to adjust for relocation.
>> >>>>> You should get rid of this one. Look for DT_TEXTREL in .o files to find
>> >>>>> the culprit.
>> >>>>>
>> >>>>>
>> >>>> Alas I cannot - The relocations are a result of loading a register with a
>> >>>> return address when calling show_boot_progress in the very early stages of
>> >>>> initialisation prior to the stack becoming available. The x86 does not
>> >>>> allow direct access to the IP so the only way to find the 'current
>> >>>> execution address' is to 'call' to the next instruction and pop the return
>> >>>> address off the stack
>> >>>>
>> >>> hmm, same as ppc but that in it self should not cause a TEXREL, should it?
>> >>> Ahh, the 'call' is absolute, not relative? I guess there is some way around it
>> >>> but it is not important ATM I guess.
>> >>>
>> >>> Evil idea, skip -fpic et. all and add the full reloc procedure
>> >>> to relocate by rewriting directly in TEXT segment. Then you save space
>> >>> but you need more relocation code. Something like dl_do_reloc from
>> >>> uClibc. Wonder how much extra code that would be? Not too much I think.
>> >>>
>> >>>
>> >> With the following flags
>> >>
>> >> PLATFORM_RELFLAGS += -fvisibility=hidden
>> >> PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
>> >> PLATFORM_LDFLAGS += -pic --emit-relocs -Bsymbolic -Bsymbolic-functions
>> >>
>> >> I get no .got, but a lot of R_386_PC32 and R_386_32 relocations. I think
>> >> this might mean I need the symbol table in the binary in order to resolve
>> >> them
>> >>
>
> BTW, how many relocs do you get compared with -fPIC? I suspect you more
> now but hopefully not that many more.
>
>> >
>> > Possibly, but I think you only need to add an offset to all those
>> > relocs.
>> >
>> Almost right. The relocations specify a symbol value that needs to be
>> added to the data in memory to relocate the reference. The symbol values
>> involved should be the start of the text section for program references,
>> the start of the uninitialized data section for bss references, and the
>> start of the data section for initialized data and constants. So there
>> are about four symbols whose value you need to keep. Take a look at
>> http://refspecs.freestandards.org/elf/elf.pdf (which you have probably
>> already looked at) and it tells you what to do with R_386_PC32 ad
>> R_386_32 relocations. Hopefully the objcopy with the --strip-unneeded
>> will remove all the symbols you don't actually need, but I don't know
>> that for sure. Note also that you can change the section flags of a
>> section marked noload to load.
>
> Still think you can get away with just ADDING an offset. The image is linked to a
> specific address and then you move the whole image to a new address. Therefore
> you should be able to read the current address, add offset, write back the new address.
>
OK, I don't really get this at all....
This code:
printf ("\n\n%s\n\n", version_string);
gets compiled into:
380403e7: 68 a4 18 05 38 push $0x380518a4
380403ec: 68 de 2c 05 38 push $0x38052cde
380403f1: e8 4f 84 00 00 call 38048845 <printf>
With relocation entries in .rel.text of:
Offset Info Type Sym.Value Sym. Name
380403e8 00016201 R_386_32 380519f0 version_string
380403ed 00000201 R_386_32 380519f0 .rodata
380403f2 00016b02 R_386_PC32 38048991 printf
Now I get the first two (R_386_32) entries - Relocation involves a simple
addition of an offset to the values at addresses 0x380403e8 and 0x380403ed
(of course, these addresses will be offset)
However, the R_386_PC32 is an enigma - The call is already relative -
there is no need to relocate it at all (call is a position independent
opcode because it is a relative jump!)
Will all R_386_PC32 be like this? Can I simply ignore them all? If so, why
do they even need to be generated?
Hmmm
Graeme
> Normally one do what you describe but here we know that the whole img has moved so
> we don't have to do calculate the new address from scratch.
>
> Jocke
>
>
More information about the U-Boot
mailing list