[U-Boot] Please pull u-boot-ti master v2
Tom
Tom.Rix at windriver.com
Sun Oct 18 00:09:39 CEST 2009
s-paulraj at ti.com wrote:
> Tom,
>
> To the best of my knowledge, the final version of patches for
> new boards were submitted after the merge window ended but the
> initial versions were submitted before the merge window ended.
> Also there are fixes for various compilation warnings.
> This pull request will result in 1 new compliation warning.
> This is due to SDP 3430 using a deprecated NET driver.
> I beleive it is being worked on by Nishanth. Any patch from
> him will be on top of the existing SDP 3430 support.
>
> Thanks,
> Sandeep
>
I have pulled this into arm/master-sync.
Please check to see that all you expect is there.
Tom
> The following changes since commit 5415337f0746123c75b28044ea487171b79a86a2:
> Simon Kagstrom (1):
> arm: Correct build with CONFIG_SYS_HUSH_PARSER set
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti master
>
> David Brownell (1):
> TI OMAP3 SDP3430: Initial Support
>
> Nishanth Menon (4):
> OMAP3: export enable_gpmc_cs_config to board files
> OMAP3: fix warnings when NAND/ONENAND is not used
> OMAP3: Fix SDRC init
> TI OMAP3: make gpmc_config as const
>
> Sandeep Paulraj (13):
> TI DaVinci DM355: Fix Compilation warning for DM355 EVM
> TI DaVinci DM365: Fix Compilation warning for DM365 EVM
> TI DaVinci DM646x: Adding initial support for DM6467 EVM
> TI: DaVinci: DM355 Leopard board support
> TI DaVinci: Maintainer for DM355 and DM365 EVM
> TI: OMAP3: Remove SZ_xx references
> TI DaVinci DM355: Add Config option for 64 bit Support
> TI DaVinci DM365: Add Config option for 64 bit Support
> TI DaVinci DVEVM: Add Config option for 64 bit Support
> TI DaVinci Sonata: Add Config option for 64 bit Support
> TI DaVinci: DM355 Leopard: Fix compilation warning
> TI DaVinci: Fix DM6467 EVM Compilation Warning
> TI DaVinci: Adding Copyright for DM365 EVM
>
> Steve Sakoman (2):
> TI: OMAP3: Refactors the SM911x driver
> OMAP3: Update Overo and Beagle environment
>
> Tom Rix (1):
> Zoom2 Fix serial gpmc setup
>
> MAINTAINERS | 8 +
> MAKEALL | 3 +
> Makefile | 9 +
> board/davinci/dm355evm/dm355evm.c | 4 +-
> board/davinci/dm355leopard/Makefile | 52 ++++
> board/davinci/dm355leopard/config.mk | 6 +
> board/davinci/dm355leopard/dm355leopard.c | 98 +++++++
> board/davinci/dm365evm/dm365evm.c | 5 +-
> board/davinci/dm6467evm/Makefile | 52 ++++
> board/davinci/dm6467evm/config.mk | 2 +
> board/davinci/dm6467evm/dm6467evm.c | 31 +++
> board/logicpd/zoom2/zoom2.c | 5 +-
> board/ti/sdp3430/Makefile | 49 ++++
> board/ti/sdp3430/config.mk | 33 +++
> board/ti/sdp3430/sdp.c | 204 ++++++++++++++
> board/ti/sdp3430/sdp.h | 417 +++++++++++++++++++++++++++++
> cpu/arm_cortexa8/omap3/mem.c | 21 +-
> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
> drivers/net/smc911x.c | 12 +-
> include/asm-arm/arch-davinci/hardware.h | 2 +
> include/asm-arm/arch-omap3/cpu.h | 1 +
> include/asm-arm/arch-omap3/mem.h | 8 +-
> include/asm-arm/arch-omap3/sys_proto.h | 2 +
> include/configs/davinci_dm355evm.h | 1 +
> include/configs/davinci_dm355leopard.h | 162 +++++++++++
> include/configs/davinci_dm365evm.h | 2 +
> include/configs/davinci_dm6467evm.h | 132 +++++++++
> include/configs/davinci_dvevm.h | 1 +
> include/configs/davinci_sonata.h | 1 +
> include/configs/devkit8000.h | 15 +-
> include/configs/omap3_beagle.h | 42 ++--
> include/configs/omap3_evm.h | 15 +-
> include/configs/omap3_overo.h | 42 ++--
> include/configs/omap3_pandora.h | 15 +-
> include/configs/omap3_sdp3430.h | 369 +++++++++++++++++++++++++
> include/configs/omap3_zoom1.h | 15 +-
> include/configs/omap3_zoom2.h | 15 +-
> 37 files changed, 1754 insertions(+), 99 deletions(-)
> create mode 100644 board/davinci/dm355leopard/Makefile
> create mode 100644 board/davinci/dm355leopard/config.mk
> create mode 100644 board/davinci/dm355leopard/dm355leopard.c
> create mode 100644 board/davinci/dm6467evm/Makefile
> create mode 100644 board/davinci/dm6467evm/config.mk
> create mode 100644 board/davinci/dm6467evm/dm6467evm.c
> create mode 100644 board/ti/sdp3430/Makefile
> create mode 100644 board/ti/sdp3430/config.mk
> create mode 100644 board/ti/sdp3430/sdp.c
> create mode 100644 board/ti/sdp3430/sdp.h
> create mode 100644 include/configs/davinci_dm355leopard.h
> create mode 100644 include/configs/davinci_dm6467evm.h
> create mode 100644 include/configs/omap3_sdp3430.h
More information about the U-Boot
mailing list