[U-Boot] ARM pull request
Wolfgang Denk
wd at denx.de
Sun Oct 18 21:56:40 CEST 2009
Dear Tom,
In message <4ADA8080.3060800 at windriver.com> you wrote:
> The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
> Daniel Gorsulowski (1):
> at91: Update MEESC board support
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master-sync
>
> Eric Benard (3):
> CPU9260 : fix machine ID when using a CPU9G20.
> fix CPU9260/CPU9G20 compile warnings
> main.c: In function 'abortboot':
Ummm... This is a terrible commit message, and even worse, I cannot
find any trace of this patch in the mailing lists? Where is it coming
from?
> Minkyu Kang (4):
> s5pc1xx: support Samsung s5pc1xx SoC
> s5pc1xx: support onenand driver
> s5pc1xx: support serial driver
> s5pc1xx: add support SMDKC100 board
>
> Nishanth Menon (4):
> OMAP3: export enable_gpmc_cs_config to board files
> OMAP3: fix warnings when NAND/ONENAND is not used
> OMAP3: Fix SDRC init
> TI OMAP3: make gpmc_config as const
>
> Sandeep Paulraj (13):
> TI DaVinci DM355: Fix Compilation warning for DM355 EVM
> TI DaVinci DM365: Fix Compilation warning for DM365 EVM
> TI DaVinci DM646x: Adding initial support for DM6467 EVM
> TI: DaVinci: DM355 Leopard board support
> TI DaVinci: Maintainer for DM355 and DM365 EVM
> TI: OMAP3: Remove SZ_xx references
> TI DaVinci DM355: Add Config option for 64 bit Support
> TI DaVinci DM365: Add Config option for 64 bit Support
> TI DaVinci DVEVM: Add Config option for 64 bit Support
> TI DaVinci Sonata: Add Config option for 64 bit Support
> TI DaVinci: DM355 Leopard: Fix compilation warning
> TI DaVinci: Fix DM6467 EVM Compilation Warning
> TI DaVinci: Adding Copyright for DM365 EVM
>
> Simon Kagstrom (1):
> arm926ejs: 8-byte align stack to avoid LDRD/STRD problems
>
> Steve Sakoman (2):
> TI: OMAP3: Refactors the SM911x driver
And where is this patch coming from? Again, I canot see a trace of it
in the mailing list archive, and anyway, it must go through the net
custodian, or at least have Ben's blessing (Acked-by: line).
> OMAP3: Update Overo and Beagle environment
>
> Tom Rix (2):
> Zoom2 Fix serial gpmc setup
> TI OMAP3 SDP3430: Initial Support
>
> kevin.morfitt at fearnside-systems.co.uk (5):
> CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
> Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
> Clean-up of s3c24x0 header files
> Clean-up of s3c24x0 drivers excluding nand driver
> Clean-up of s3c24x0 nand driver
>
> MAINTAINERS | 12 +
> MAKEALL | 4 +
> Makefile | 12 +
> board/davinci/dm355evm/dm355evm.c | 4 +-
> board/davinci/dm355leopard/Makefile | 52 ++
> board/davinci/dm355leopard/config.mk | 6 +
> board/davinci/dm355leopard/dm355leopard.c | 98 +++
> board/davinci/dm365evm/dm365evm.c | 5 +-
> board/davinci/dm6467evm/Makefile | 52 ++
> board/davinci/dm6467evm/config.mk | 2 +
> board/davinci/dm6467evm/dm6467evm.c | 31 +
> board/eukrea/cpu9260/cpu9260.c | 2 +-
> board/logicpd/zoom2/zoom2.c | 5 +-
> board/mpl/vcma9/vcma9.c | 13 +-
> board/mpl/vcma9/vcma9.h | 20 +-
> board/samsung/smdk2400/smdk2400.c | 5 +-
> board/samsung/smdk2410/smdk2410.c | 5 +-
> board/samsung/smdkc100/Makefile | 55 ++
> board/samsung/smdkc100/config.mk | 16 +
> board/samsung/smdkc100/lowlevel_init.S | 215 +++++
> board/samsung/smdkc100/mem_setup.S | 197 +++++
> board/samsung/smdkc100/onenand.c | 83 ++
> board/samsung/smdkc100/smdkc100.c | 51 ++
> board/sbc2410x/sbc2410x.c | 7 +-
> board/ti/sdp3430/Makefile | 49 ++
> board/ti/sdp3430/config.mk | 33 +
> board/ti/sdp3430/sdp.c | 204 +++++
> board/ti/sdp3430/sdp.h | 417 +++++++++
> board/trab/cmd_trab.c | 12 +-
> board/trab/rs485.c | 12 +-
> board/trab/trab.c | 17 +-
> board/trab/trab_fkt.c | 26 +-
> board/trab/tsc2000.c | 17 +-
> board/trab/tsc2000.h | 4 +-
> board/trab/vfd.c | 12 +-
> common/serial.c | 18 +
> cpu/arm920t/s3c24x0/interrupts.c | 4 +-
> cpu/arm920t/s3c24x0/speed.c | 42 +-
> cpu/arm920t/s3c24x0/timer.c | 110 ++--
> cpu/arm920t/s3c24x0/usb.c | 30 +-
> cpu/arm920t/s3c24x0/usb_ohci.c | 1323
> +++++++++++++++--------------
> cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++---
> cpu/arm920t/start.S | 63 +-
> cpu/arm926ejs/start.S | 1 +
> cpu/arm_cortexa8/omap3/mem.c | 21 +-
> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
> cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++
> cpu/arm_cortexa8/s5pc1xx/cache.c | 43 +
> cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++
> cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++
> cpu/arm_cortexa8/s5pc1xx/reset.S | 47 +
> cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++
> doc/README.s5pc1xx | 56 ++
> drivers/i2c/s3c24x0_i2c.c | 273 +++---
> drivers/mtd/nand/s3c2410_nand.c | 62 +-
> drivers/mtd/onenand/Makefile | 1 +
> drivers/mtd/onenand/samsung.c | 636 ++++++++++++++
> drivers/net/smc911x.c | 12 +-
> drivers/rtc/s3c24x0_rtc.c | 130 ++--
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_s3c24x0.c | 160 ++--
> drivers/serial/serial_s5pc1xx.c | 195 +++++
> include/asm-arm/arch-davinci/hardware.h | 2 +
> include/asm-arm/arch-omap3/cpu.h | 1 +
> include/asm-arm/arch-omap3/mem.h | 8 +-
> include/asm-arm/arch-omap3/sys_proto.h | 2 +
> include/asm-arm/arch-s5pc1xx/clk.h | 32 +
> include/asm-arm/arch-s5pc1xx/clock.h | 94 ++
> include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++
> include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++
> include/asm-arm/arch-s5pc1xx/power.h | 42 +
> include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++
> include/asm-arm/arch-s5pc1xx/uart.h | 47 +
> include/configs/cpu9260.h | 1 +
> include/configs/cpuat91.h | 4 +-
> include/configs/davinci_dm355evm.h | 1 +
> include/configs/davinci_dm355leopard.h | 162 ++++
> include/configs/davinci_dm365evm.h | 2 +
> include/configs/davinci_dm6467evm.h | 132 +++
> include/configs/davinci_dvevm.h | 1 +
> include/configs/davinci_sonata.h | 1 +
> include/configs/devkit8000.h | 15 +-
> include/configs/omap3_beagle.h | 42 +-
> include/configs/omap3_evm.h | 15 +-
> include/configs/omap3_overo.h | 42 +-
> include/configs/omap3_pandora.h | 15 +-
> include/configs/omap3_sdp3430.h | 369 ++++++++
> include/configs/omap3_zoom1.h | 15 +-
> include/configs/omap3_zoom2.h | 15 +-
> include/configs/sbc2410x.h | 4 +-
> include/configs/smdk2400.h | 4 +-
> include/configs/smdk2410.h | 4 +-
> include/configs/smdkc100.h | 242 ++++++
> include/configs/trab.h | 12 +-
> include/linux/mtd/onenand.h | 1 +
> include/linux/mtd/onenand_regs.h | 4 +
> include/linux/mtd/samsung_onenand.h | 131 +++
> include/s3c2400.h | 494 +----------
> include/s3c2410.h | 159 +---
> include/s3c24x0.h | 605 ++------------
> include/serial.h | 7 +
> 101 files changed, 6329 insertions(+), 2465 deletions(-)
> create mode 100644 board/davinci/dm355leopard/Makefile
> create mode 100644 board/davinci/dm355leopard/config.mk
> create mode 100644 board/davinci/dm355leopard/dm355leopard.c
> create mode 100644 board/davinci/dm6467evm/Makefile
> create mode 100644 board/davinci/dm6467evm/config.mk
> create mode 100644 board/davinci/dm6467evm/dm6467evm.c
> create mode 100644 board/samsung/smdkc100/Makefile
> create mode 100644 board/samsung/smdkc100/config.mk
> create mode 100644 board/samsung/smdkc100/lowlevel_init.S
> create mode 100644 board/samsung/smdkc100/mem_setup.S
> create mode 100644 board/samsung/smdkc100/onenand.c
> create mode 100644 board/samsung/smdkc100/smdkc100.c
> create mode 100644 board/ti/sdp3430/Makefile
> create mode 100644 board/ti/sdp3430/config.mk
> create mode 100644 board/ti/sdp3430/sdp.c
> create mode 100644 board/ti/sdp3430/sdp.h
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S
> create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c
> create mode 100644 doc/README.s5pc1xx
> create mode 100644 drivers/mtd/onenand/samsung.c
> create mode 100644 drivers/serial/serial_s5pc1xx.c
> create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/power.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h
> create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h
> create mode 100644 include/configs/davinci_dm355leopard.h
> create mode 100644 include/configs/davinci_dm6467evm.h
> create mode 100644 include/configs/omap3_sdp3430.h
> create mode 100644 include/configs/smdkc100.h
> create mode 100644 include/linux/mtd/samsung_onenand.h
Sorry, put on hold until I understand what's going on with the two
patches above.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Cleverness and Style have no place in getting a project completed.
-- Tom Christiansen
More information about the U-Boot
mailing list