[U-Boot] [PATCH v2 2/4] video: mb862xx: add option CONFIG_VIDEO_MB862xx_ACCEL for 32bpp mode
Wolfgang Grandegger
wg at grandegger.com
Fri Oct 23 12:03:14 CEST 2009
From: Anatolij Gustschin <agust at denx.de>
The new IPEK01 board can use the 32 bpp mode for the Lime graphics
controller. For this mode, video accelaration does not work. This patch
makes the accelaration configurable via CONFIG_VIDEO_MB862xx_ACCEL,
which is enabled for the lwmon5 and the socrates board for backward
compatibility.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
Signed-off-by: Wolfgang Grandegger <wg at denx.de>
---
drivers/video/cfb_console.c | 2 ++
drivers/video/mb862xx.c | 16 +++++++++++++++-
include/configs/lwmon5.h | 1 +
include/configs/socrates.h | 1 +
4 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index fbc4df9..0df321c 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -146,9 +146,11 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
#ifdef CONFIG_VIDEO_CORALP
#define VIDEO_FB_LITTLE_ENDIAN
#endif
+#ifdef CONFIG_VIDEO_MB862xx_ACCEL
#define VIDEO_HW_RECTFILL
#define VIDEO_HW_BITBLT
#endif
+#endif
/*****************************************************************************/
/* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index bb212a8..edf34aa 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -89,6 +89,7 @@ unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 };
(GC_DISP_BASE | GC_L0PAL0) + \
((idx) << 2)), (val))
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
static void gdc_sw_reset (void)
{
GraphicDevice *dev = &mb862xx;
@@ -129,6 +130,7 @@ static void de_wait_slots (int slots)
break;
}
}
+#endif
#if !defined(CONFIG_VIDEO_CORALP)
static void board_disp_init (void)
@@ -144,11 +146,13 @@ static void board_disp_init (void)
#endif
/*
- * Init drawing engine
+ * Init drawing engine if accel enabled.
+ * Also clears visible framebuffer.
*/
static void de_init (void)
{
GraphicDevice *dev = &mb862xx;
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
@@ -174,6 +178,14 @@ static void de_init (void)
DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
/* sync with SW access to framebuffer */
de_wait ();
+#else
+ unsigned int i, *p;
+
+ i = dev->winSizeX * dev->winSizeY;
+ p = (unsigned int *)dev->frameAdrs;
+ while (i--)
+ *p++ = 0;
+#endif
}
#if defined(CONFIG_VIDEO_CORALP)
@@ -421,6 +433,7 @@ void video_set_lut (unsigned int index, unsigned char r,
L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
}
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
/*
* Drawing engine Fill and BitBlt screen region
*/
@@ -462,3 +475,4 @@ void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
DE_WR_FIFO ((height << 16) | width);
de_wait (); /* sync */
}
+#endif
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 67434f5..927b80f 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -344,6 +344,7 @@
/* Video console */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 3321aa2..59a4b28 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -198,6 +198,7 @@
#define CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
--
1.6.2.5
More information about the U-Boot
mailing list