[U-Boot] AT91SAM9263 with DM8203 Phy
Matthias Wieloch
matthias_wieloch at web.de
Fri Oct 23 13:03:30 CEST 2009
Hi,
Has anyone experience with phy DM8203?
On the AT91SAM9263-EK the phy DM9161 is used.
But I'd like to use the 2-Port Switch of the DM8203.
So far I couldn't get it working. The best result at the moment is a timeout
while autonegotiation in U-Boot 1.3.4 based on AT91SAM9263EK.
As I found out the Phy Adress for the macb structure is set to 0 while
initialisation and both pyhs differ in number of address lines.
Regards
Matthias
More information about the U-Boot
mailing list