[U-Boot] u-boot-2009.08 make error

[Wolfgang Denk]

Dear LakeAylwyn,

please make sure to post plain text only, using an internationally
well accepted character set (ASCII, ISO-8859).

In message <BAY113-W46CC454BC778754E4D99A4F4BC0 at phx.gbl> you wrote:
>
> i use:
> 
> make ep7312_config
> make all

Which tool chain are you using, and what is your setting of
CROSS_COMPILE ?

> then 
> 
> ÔÚº¯Êý¡®start_armboot¡¯ÖУº
> /home/smile/u-boot-2009.08/lib_arm/board.c:428£º¶Ô¡®cs8900_get_enetaddr¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®ArpRequest¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:250£º¶Ô¡®eth_send¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®NetStartAgain¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:568£º¶Ô¡®eth_halt¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®NetSendPacket¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:623£º¶Ô¡®eth_send¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®NetSendUDPPacket¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:668£º¶Ô¡®eth_send¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®NetReceive¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:1263£º¶Ô¡®eth_send¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:1295£º¶Ô¡®eth_send¡¯Î´¶¨ÒåµÄÒýÓÃ
> net/libnet.a(net.o)£ºÔÚº¯Êý¡®NetLoop¡¯ÖУº
> /home/smile/u-boot-2009.08/net/net.c:342£º¶Ô¡®eth_halt¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:346£º¶Ô¡®eth_init¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:370£º¶Ô¡®eth_halt¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:481£º¶Ô¡®eth_halt¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:475£º¶Ô¡®eth_rx¡¯Î´¶¨ÒåµÄÒýÓÃ
> /home/smile/u-boot-2009.08/net/net.c:535£º¶Ô¡®eth_halt¡¯Î´¶¨ÒåµÄÒýÓÃ
> make: *** [u-boot] ´íÎó 1

What is this supposed to mean? I just see a lot of gibberish of
unreadable characters but no error messages.

Here is what I get:

-> git-checkout v2009.08
Checking out files: 100% (1318/1318), done.
Note: moving to 'v2009.08' which isn't a local branch
If you want to create a new branch from this checkout, you may do so
(now or later) by using -b with the checkout command again. Example:
  git checkout -b <new_branch_name>
HEAD is now at 3d35d87... Prepare 2009.08
-> eldk-switch -r 4.1 arm
Setup for arm-linux (using ELDK 4.1)
-> echo $CROSS_COMPILE
arm-linux-
-> MAKEALL ep7312
Configuring for ep7312 board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
   text    data     bss     dec     hex filename
 105238    3571   14936  123745   1e361 ./u-boot


What exactly is your problem?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you believe that feeling bad or worrying long enough will change a
past or future event, then you are residing on another planet with  a
different reality system.