[U-Boot] [PATCH v2 3/4] add TI DA8xx support: Add new directory for da830evm board

Tom Tom.Rix at windriver.com
Sun Oct 25 01:47:01 CEST 2009


Nick Thompson wrote:
> Add new directory for da830evm board
> 
> Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
> Digital EVM board. See http://www.spectrumdigital.com/
> 
> Provides:
> Initial boot and configuration.
> Support for i2c.
> UART support (console).
> 
> Signed-off-by: Nick Thompson <nick.thompson at gefanuc.com>
> ---
> Applies to u-boot-ti
> 
>  board/davinci/da830evm/Makefile     |   52 ++++++++++++
>  board/davinci/da830evm/board_init.S |   29 +++++++
>  board/davinci/da830evm/config.mk    |   45 ++++++++++
>  board/davinci/da830evm/dv_board.c   |  156 +++++++++++++++++++++++++++++++++++
>  4 files changed, 282 insertions(+), 0 deletions(-)
> 
> diff --git a/board/davinci/da830evm/Makefile b/board/davinci/da830evm/Makefile
> new file mode 100644
> index 0000000..fa00138
> --- /dev/null
> +++ b/board/davinci/da830evm/Makefile
> @@ -0,0 +1,52 @@
> +#
> +# (C) Copyright 2000, 2001, 2002
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).a
> +
> +COBJS	:= dv_board.o
> +SOBJS	:= board_init.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> +	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak *~ .depend
> +
> +#########################################################################
> +# This is for $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/davinci/da830evm/board_init.S b/board/davinci/da830evm/board_init.S
> new file mode 100644
> index 0000000..22d8adc
> --- /dev/null
> +++ b/board/davinci/da830evm/board_init.S
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
> + *
> + * Board-specific low level initialization code. Called at the very end
> + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
> + * initialization required.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +
> +.globl	dv_board_init
> +dv_board_init:
> +
> +	mov	pc, lr

This and the trivial lowlevel_init.S file makes
me think you just use CONFIG_SKIP_LOWLEVEL_INIT
and reduce your file count by 2

> diff --git a/board/davinci/da830evm/config.mk b/board/davinci/da830evm/config.mk
> new file mode 100644
> index 0000000..f05e36a
> --- /dev/null
> +++ b/board/davinci/da830evm/config.mk
> @@ -0,0 +1,45 @@
> +#
> +# (C) Copyright 2008 Sekhar Nori, Texas Instruments, Inc. <nsekhar at ti.com>
> +#
> +# Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
> +#
> +# (C) Copyright 2003 Swaminathan, Texas Instruments, <swami.iyer at ti.com>
> +#
> +# (C) Copyright 2002
> +# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
> +# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +# Texas Instruments DA8xx EVM board (ARM925EJS) cpu
> +# see http://www.ti.com/ for more information on Texas Instruments
> +#
> +# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips).
> +# Physical Address:
> +# C000'0000 to C400'0000
> +#
> +# Linux-Kernel is expected to be at C000'8000, entry C000'8000
> +# (mem base + reserved)
> +#
> +# we load ourself to C108 '0000
> +
> +
> +#Provide at least 16MB spacing between us and the Linux Kernel image
> +TEXT_BASE = 0xC1080000
> diff --git a/board/davinci/da830evm/dv_board.c b/board/davinci/da830evm/dv_board.c
> new file mode 100644
> index 0000000..a5e507c
> --- /dev/null
> +++ b/board/davinci/da830evm/dv_board.c

Change this file to be da830evm.c

> @@ -0,0 +1,156 @@
> +/*
> + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson at gefanuc.com>
> + *
> + * Use the board_eth_init hook to initialise the ethernet in the
> + * correct order. (Has to wait until after call to miiphy_init().)
> + *
> + * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc.  <nsekhar at ti.com>
> + *
> + * Modified for DA8xx EVM.
> + *
> + * Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
> + *
> + * Parts are shamelessly stolen from various TI sources, original copyright
> + * follows:
> + * -----------------------------------------------------------------
> + *
> + * Copyright (C) 2004 Texas Instruments.
> + *
> + * ----------------------------------------------------------------------------
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + * ----------------------------------------------------------------------------
> + */
> +
> +#include <common.h>
> +#include <i2c.h>
> +#include <net.h>
> +#include <netdev.h>
> +#include <asm/arch/hardware.h>
> +#include <asm/arch/emac_defs.h>
> +#include <asm/io.h>
> +#include "../common/misc.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Works on Always On power domain only (no PD argument) */
> +void lpsc_on(unsigned int id)
> +{
> +	unsigned int	mdstat, mdctl, ptstat, ptcmd;
> +

You are passing in #defined numbers
but are checking against hardcoded values
Please change this to also use #defines

> +	if (id >= 64)
> +		return;
> +
> +	if (id < 32) {
> +		mdstat = PSC0_MDSTAT + (id * 4);
> +		mdctl = PSC0_MDCTL + (id * 4);
> +		ptstat = PSC0_PTSTAT;
> +		ptcmd = PSC0_PTCMD;
> +	} else {
> +		id -= 32;
> +		mdstat = PSC1_MDSTAT + (id * 4);
> +		mdctl = PSC1_MDCTL + (id * 4);
> +		ptstat = PSC1_PTSTAT;
> +		ptcmd = PSC1_PTCMD;
> +	}
> +
> +	while (readl(ptstat) & 0x01)
> +		; /* wait */
> +
> +	if ((readl(mdstat) & 0x1f) == 0x03)
> +		return; /* Already on and enabled */
> +
> +	writel(readl(mdctl) | 0x03, mdctl);
> +
> +	writel(0x01, ptcmd);
> +
> +	while (readl(ptstat) & 0x01)
> +		; /* wait */
> +	while ((readl(mdstat) & 0x1f) != 0x03)
> +		; /* wait */
> +}
> +
> +/* Read, Modify, Write macro for pin multiplxer modifications */
> +#define PINMUX(n, val, mask) writel((val & mask) | (readl(n) & (~mask)), n)

Can this be moved to common/misc.h ?
Other davinci's that do mux-ing could benefit from a common macro.

> +
> +int board_init(void)
> +{
> +
> +#ifndef CONFIG_USE_IRQ
> +	/*
> +	 * Mask all IRQs by clearing the global enable and setting
> +	 * the enable clear for all the 90 interrupts. This code is
> +	 * also included in low level init. Including it here in case
> +	 * low level init is skipped. Not removing it from low level
> +	 * init in case some of the low level init code generates
> +	 * interrupts... Not expected... but you never know...
> +	 */
This comment does not go with the noop-ish lowlevel_init code.
Please change this.

> +
> +	writel(0, INTC_GLB_EN);
> +
> +	writel(0, INTC_HINT_EN + 0x0);
> +	writel(0, INTC_HINT_EN + 0x4);
> +	writel(0, INTC_HINT_EN + 0x8);
> +
> +	writel(0xffffffff, INTC_EN_CLR0 + 0x0);
> +	writel(0xffffffff, INTC_EN_CLR0 + 0x4);
> +	writel(0xffffffff, INTC_EN_CLR0 + 0x8);
> +#endif
> +
> +	/* arch number of the board */
> +	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
> +
> +	/* address of boot parameters */
> +	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
> +
> +	/*
> +	 * Power on required peripherals
> +	 * ARM does not have access by default to PSC0 and PSC1
> +	 * assuming here that the DSP bootloader has set the IOPU
> +	 * such that PSC access is available to ARM
> +	 */
> +	lpsc_on(DAVINCI_LPSC_AEMIF);    /* NAND, NOR */
> +	lpsc_on(DAVINCI_LPSC_SPI0);     /* Serial Flash */
> +	lpsc_on(DAVINCI_LPSC_EMAC);     /* image download */
> +	lpsc_on(DAVINCI_LPSC_UART2);    /* console */
> +	lpsc_on(DAVINCI_LPSC_GPIO);
> +
> +	/* Pin Muxing support */
> +
> +	/* setup the SUSPSRC for ARM to control emulation suspend */
> +	writel(readl(SUSPSRC) & ~(SUSPSRC_EMAC | SUSPSRC_I2C | SUSPSRC_SPI0 |
> +			SUSPSRC_TIMER0 | SUSPSRC_UART2), SUSPSRC);
> +
> +#ifdef CONFIG_USE_PINMUX
> +
> +#ifdef CONFIG_SPI_FLASH
> +	/* SPI0 pin enable*/
> +	PINMUX(PINMUX7, 0x11111000, 0xFFFFF000)
> +#endif
> +
> +	/* UART pin enable */
> +	PINMUX(PINMUX8, 0x20000000, 0xF0000000);
> +	PINMUX(PINMUX9, 0x00000002, 0x0000000F);
> +
> +	/* I2C pin enable */
> +	PINMUX(PINMUX9, 0x00022000, 0x000FF000);
> +
> +#endif /* CONFIG_USE_PIN_MUX */

Please de-magic these numbers if possible.

> +
> +	/* enable the console UART */
> +	writel(PWREMU_MGMT_FREE | PWREMU_MGMT_URRST | PWREMU_MGMT_UTRST,
> +			DAVINCI_UART2_BASE + PWREMU_MGMT_BASE);
> +

Will this work if the UART mux is not configured ?

Tom

> +	return(0);
> +}
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



More information about the U-Boot mailing list