[U-Boot] Requesting an update to ARM mach types

[Tom]

I have pushed an update to arm / next.
This used the mach-types.h from Russel's cur-git repo.

I did not see zoom3 there so I will need to update this again closer
to when I submit the board.

If you do not see that board you were looking for either,
let me know.  I would rather pull this file from the kernel but
I am (somewhat) flexible.

Tom

Nishanth Menon wrote:
> On Thu, Oct 22, 2009 at 4:42 PM, Paulraj, Sandeep <s-paulraj at ti.com> wrote:
>>> Paulraj, Sandeep wrote:
>>>> Tom,
>>>>
>>>> The ARM mach-types.h in /include/asm-arm needs to be updated with what
>>> is present at
>>>> http://www.arm.linux.org.uk/developer/machines/
>>>>
>>>>
>>>> Thanks,
>>>> Sandeep
>>>> _______________________________________________
>>>> U-Boot mailing list
>>>> U-Boot at lists.denx.de
>>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>>
>>>>
>>> Can you point me to a kernel git commit?
>> No at this very moment.
> 
> see http://marc.info/?t=125617384500001&r=1&w=2
>>> Can you verify that it has MACH_TYPE_OMAP_ZOOM3 ?
>> Yes. And it had OMAP 3630
>>> I will be submitting this soon :)
>>>
>>> I will do this over the weekend
>>> Thanks,
>>> Tom
>>>
>> I'll look
>>
> Regards,
> Nishanth Menon
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot