[U-Boot] [PATCH 4/8] OMAP3 Add usb device support
Tom
Tom.Rix at windriver.com
Tue Oct 27 15:04:20 CET 2009
Gupta, Ajay Kumar wrote:
> Tom,
>
>> From: Tom Rix <Tom.Rix <at> windriver.com>
>> Subject: [PATCH 4/8] OMAP3 Add usb device support
>> Newsgroups: gmane.comp.boot-loaders.u-boot
>> Date: 2009-09-28 16:37:25 GMT (4 weeks, 12 hours and 29 minutes ago)
>> This change adds the usb device support for musb.
>>
>> Omap3 platform support added at the same level as davinci.
>>
>> The interface for usbtty to use the musb device support was added.
>>
>> Verified on omap3 beagle, zoom1 and zoom2.
>>
>> Signed-off-by: Tom Rix <Tom.Rix <at> windriver.com>
>> ---
>> drivers/serial/usbtty.h | 2 +
>> drivers/usb/musb/Makefile | 2 +
>> drivers/usb/musb/musb_core.c | 8 +-
>> drivers/usb/musb/musb_core.h | 40 ++
>> drivers/usb/musb/musb_debug.h | 205 +++++++++
>> drivers/usb/musb/musb_udc.c | 963
>> +++++++++++++++++++++++++++++++++++++++++
>> drivers/usb/musb/omap3.c | 129 ++++++
>> drivers/usb/musb/omap3.h | 48 ++
>> include/usb.h | 3 +-
>> include/usb/musb_udc.h | 54 +++
>> 10 files changed, 1451 insertions(+), 3 deletions(-)
>> create mode 100644 drivers/usb/musb/musb_debug.h
>> create mode 100644 drivers/usb/musb/musb_udc.c
>> create mode 100644 drivers/usb/musb/omap3.c
>> create mode 100644 drivers/usb/musb/omap3.h
>> create mode 100644 include/usb/musb_udc.h
>>
>
> <snip>
> ..
> ..
>
>> +int musb_platform_init(void)
>> +{
>> + int ret = -1;
>> +
>> + if (platform_needs_initialization) {
>> + u32 stdby;
>> +
>> + if (twl4030_usb_ulpi_init()) {
>> + serial_printf("ERROR: %s Could not initialize
>> PHY\n",
>> + __PRETTY_FUNCTION__);
>> + goto end;
>> + }
>
> OMAP3EVM uses ISP1504 phy and so twl4030 related init is not required.
> Can we move this within #ifdef like,
>
> #ifndef CONFIG_OMAP3_EVM
> + if (twl4030_usb_ulpi_init()) {
> ...
> ...
> #endif
>
>
> -Ajay
I will include this in the next revision.
Will the omap3_evm need to add its own PHY initialization
code ?
More information about the U-Boot
mailing list