[U-Boot] [PATCH] cfi: Add weak default function for flash_cmd_reset()
Stefan Roese
sr at denx.de
Tue Oct 27 15:24:50 CET 2009
Currently the CFI driver issues both AMD and Intel reset commands.
This is because the driver doesn't know yet which chips are connected.
This dual reset seems to cause problems with the M29W128G chips as
reported by Richard Retanubun. This patch now introduces a weak default
function for the CFI reset command, still with both resets. This can
be overridden by a board specific version if necessary.
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Richard Retanubun <RichardRetanubun at ruggedcom.com>
---
drivers/mtd/cfi_flash.c | 151 ++++++---------------------------------------
include/mtd/cfi_flash.h | 157 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 175 insertions(+), 133 deletions(-)
create mode 100644 include/mtd/cfi_flash.h
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 6eea49a..24eb33f 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -39,6 +39,7 @@
#include <asm/io.h>
#include <asm/byteorder.h>
#include <environment.h>
+#include <mtd/cfi_flash.h>
/*
* This file implements a Common Flash Interface (CFI) driver for
@@ -65,100 +66,6 @@
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#endif
-#define FLASH_CMD_CFI 0x98
-#define FLASH_CMD_READ_ID 0x90
-#define FLASH_CMD_RESET 0xff
-#define FLASH_CMD_BLOCK_ERASE 0x20
-#define FLASH_CMD_ERASE_CONFIRM 0xD0
-#define FLASH_CMD_WRITE 0x40
-#define FLASH_CMD_PROTECT 0x60
-#define FLASH_CMD_PROTECT_SET 0x01
-#define FLASH_CMD_PROTECT_CLEAR 0xD0
-#define FLASH_CMD_CLEAR_STATUS 0x50
-#define FLASH_CMD_READ_STATUS 0x70
-#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
-#define FLASH_CMD_WRITE_BUFFER_PROG 0xE9
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
-
-#define FLASH_STATUS_DONE 0x80
-#define FLASH_STATUS_ESS 0x40
-#define FLASH_STATUS_ECLBS 0x20
-#define FLASH_STATUS_PSLBS 0x10
-#define FLASH_STATUS_VPENS 0x08
-#define FLASH_STATUS_PSS 0x04
-#define FLASH_STATUS_DPS 0x02
-#define FLASH_STATUS_R 0x01
-#define FLASH_STATUS_PROTECT 0x01
-
-#define AMD_CMD_RESET 0xF0
-#define AMD_CMD_WRITE 0xA0
-#define AMD_CMD_ERASE_START 0x80
-#define AMD_CMD_ERASE_SECTOR 0x30
-#define AMD_CMD_UNLOCK_START 0xAA
-#define AMD_CMD_UNLOCK_ACK 0x55
-#define AMD_CMD_WRITE_TO_BUFFER 0x25
-#define AMD_CMD_WRITE_BUFFER_CONFIRM 0x29
-
-#define AMD_STATUS_TOGGLE 0x40
-#define AMD_STATUS_ERROR 0x20
-
-#define ATM_CMD_UNLOCK_SECT 0x70
-#define ATM_CMD_SOFTLOCK_START 0x80
-#define ATM_CMD_LOCK_SECT 0x40
-
-#define FLASH_CONTINUATION_CODE 0x7F
-
-#define FLASH_OFFSET_MANUFACTURER_ID 0x00
-#define FLASH_OFFSET_DEVICE_ID 0x01
-#define FLASH_OFFSET_DEVICE_ID2 0x0E
-#define FLASH_OFFSET_DEVICE_ID3 0x0F
-#define FLASH_OFFSET_CFI 0x55
-#define FLASH_OFFSET_CFI_ALT 0x555
-#define FLASH_OFFSET_CFI_RESP 0x10
-#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
-/* extended query table primary address */
-#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15
-#define FLASH_OFFSET_WTOUT 0x1F
-#define FLASH_OFFSET_WBTOUT 0x20
-#define FLASH_OFFSET_ETOUT 0x21
-#define FLASH_OFFSET_CETOUT 0x22
-#define FLASH_OFFSET_WMAX_TOUT 0x23
-#define FLASH_OFFSET_WBMAX_TOUT 0x24
-#define FLASH_OFFSET_EMAX_TOUT 0x25
-#define FLASH_OFFSET_CEMAX_TOUT 0x26
-#define FLASH_OFFSET_SIZE 0x27
-#define FLASH_OFFSET_INTERFACE 0x28
-#define FLASH_OFFSET_BUFFER_SIZE 0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
-#define FLASH_OFFSET_ERASE_REGIONS 0x2D
-#define FLASH_OFFSET_PROTECT 0x02
-#define FLASH_OFFSET_USER_PROTECTION 0x85
-#define FLASH_OFFSET_INTEL_PROTECTION 0x81
-
-#define CFI_CMDSET_NONE 0
-#define CFI_CMDSET_INTEL_EXTENDED 1
-#define CFI_CMDSET_AMD_STANDARD 2
-#define CFI_CMDSET_INTEL_STANDARD 3
-#define CFI_CMDSET_AMD_EXTENDED 4
-#define CFI_CMDSET_MITSU_STANDARD 256
-#define CFI_CMDSET_MITSU_EXTENDED 257
-#define CFI_CMDSET_SST 258
-#define CFI_CMDSET_INTEL_PROG_REGIONS 512
-
-#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
-# undef FLASH_CMD_RESET
-# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
-#endif
-
-typedef union {
- unsigned char c;
- unsigned short w;
- unsigned long l;
- unsigned long long ll;
-} cfiword_t;
-
-#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
-
static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
static uint flash_verbose = 1;
@@ -178,38 +85,6 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#endif
-/* CFI standard query structure */
-struct cfi_qry {
- u8 qry[3];
- u16 p_id;
- u16 p_adr;
- u16 a_id;
- u16 a_adr;
- u8 vcc_min;
- u8 vcc_max;
- u8 vpp_min;
- u8 vpp_max;
- u8 word_write_timeout_typ;
- u8 buf_write_timeout_typ;
- u8 block_erase_timeout_typ;
- u8 chip_erase_timeout_typ;
- u8 word_write_timeout_max;
- u8 buf_write_timeout_max;
- u8 block_erase_timeout_max;
- u8 chip_erase_timeout_max;
- u8 dev_size;
- u16 interface_desc;
- u16 max_buf_write_size;
- u8 num_erase_regions;
- u32 erase_region_info[NUM_ERASE_REGIONS];
-} __attribute__((packed));
-
-struct cfi_pri_hdr {
- u8 pri[3];
- u8 major_version;
- u8 minor_version;
-} __attribute__((packed));
-
static void __flash_write8(u8 value, void *addr)
{
__raw_writeb(value, addr);
@@ -452,8 +327,8 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
/*
* Write a proper sized command to the correct address
*/
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
- uint offset, u32 cmd)
+void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+ uint offset, u32 cmd)
{
void *addr;
@@ -1699,15 +1574,25 @@ static void flash_read_cfi (flash_info_t *info, void *buf,
p[i] = flash_read_uchar(info, start + i);
}
+void __flash_cmd_reset(flash_info_t *info)
+{
+ /*
+ * We do not yet know what kind of commandset to use, so we issue
+ * the reset command in both Intel and AMD variants, in the hope
+ * that AMD flash roms ignore the Intel command.
+ */
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+void flash_cmd_reset(flash_info_t *info)
+ __attribute__((weak,alias("__flash_cmd_reset")));
+
static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
{
int cfi_offset;
- /* We do not yet know what kind of commandset to use, so we issue
- the reset command in both Intel and AMD variants, in the hope
- that AMD flash roms ignore the Intel command. */
- flash_write_cmd (info, 0, 0, AMD_CMD_RESET);
- flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+ /* Issue FLASH reset command */
+ flash_cmd_reset(info);
for (cfi_offset=0;
cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h
new file mode 100644
index 0000000..2aa6911
--- /dev/null
+++ b/include/mtd/cfi_flash.h
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __CFI_FLASH_H__
+#define __CFI_FLASH_H__
+
+#define FLASH_CMD_CFI 0x98
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_CMD_RESET 0xff
+#define FLASH_CMD_BLOCK_ERASE 0x20
+#define FLASH_CMD_ERASE_CONFIRM 0xD0
+#define FLASH_CMD_WRITE 0x40
+#define FLASH_CMD_PROTECT 0x60
+#define FLASH_CMD_PROTECT_SET 0x01
+#define FLASH_CMD_PROTECT_CLEAR 0xD0
+#define FLASH_CMD_CLEAR_STATUS 0x50
+#define FLASH_CMD_READ_STATUS 0x70
+#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
+#define FLASH_CMD_WRITE_BUFFER_PROG 0xE9
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
+
+#define FLASH_STATUS_DONE 0x80
+#define FLASH_STATUS_ESS 0x40
+#define FLASH_STATUS_ECLBS 0x20
+#define FLASH_STATUS_PSLBS 0x10
+#define FLASH_STATUS_VPENS 0x08
+#define FLASH_STATUS_PSS 0x04
+#define FLASH_STATUS_DPS 0x02
+#define FLASH_STATUS_R 0x01
+#define FLASH_STATUS_PROTECT 0x01
+
+#define AMD_CMD_RESET 0xF0
+#define AMD_CMD_WRITE 0xA0
+#define AMD_CMD_ERASE_START 0x80
+#define AMD_CMD_ERASE_SECTOR 0x30
+#define AMD_CMD_UNLOCK_START 0xAA
+#define AMD_CMD_UNLOCK_ACK 0x55
+#define AMD_CMD_WRITE_TO_BUFFER 0x25
+#define AMD_CMD_WRITE_BUFFER_CONFIRM 0x29
+
+#define AMD_STATUS_TOGGLE 0x40
+#define AMD_STATUS_ERROR 0x20
+
+#define ATM_CMD_UNLOCK_SECT 0x70
+#define ATM_CMD_SOFTLOCK_START 0x80
+#define ATM_CMD_LOCK_SECT 0x40
+
+#define FLASH_CONTINUATION_CODE 0x7F
+
+#define FLASH_OFFSET_MANUFACTURER_ID 0x00
+#define FLASH_OFFSET_DEVICE_ID 0x01
+#define FLASH_OFFSET_DEVICE_ID2 0x0E
+#define FLASH_OFFSET_DEVICE_ID3 0x0F
+#define FLASH_OFFSET_CFI 0x55
+#define FLASH_OFFSET_CFI_ALT 0x555
+#define FLASH_OFFSET_CFI_RESP 0x10
+#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
+/* extended query table primary address */
+#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15
+#define FLASH_OFFSET_WTOUT 0x1F
+#define FLASH_OFFSET_WBTOUT 0x20
+#define FLASH_OFFSET_ETOUT 0x21
+#define FLASH_OFFSET_CETOUT 0x22
+#define FLASH_OFFSET_WMAX_TOUT 0x23
+#define FLASH_OFFSET_WBMAX_TOUT 0x24
+#define FLASH_OFFSET_EMAX_TOUT 0x25
+#define FLASH_OFFSET_CEMAX_TOUT 0x26
+#define FLASH_OFFSET_SIZE 0x27
+#define FLASH_OFFSET_INTERFACE 0x28
+#define FLASH_OFFSET_BUFFER_SIZE 0x2A
+#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
+#define FLASH_OFFSET_ERASE_REGIONS 0x2D
+#define FLASH_OFFSET_PROTECT 0x02
+#define FLASH_OFFSET_USER_PROTECTION 0x85
+#define FLASH_OFFSET_INTEL_PROTECTION 0x81
+
+#define CFI_CMDSET_NONE 0
+#define CFI_CMDSET_INTEL_EXTENDED 1
+#define CFI_CMDSET_AMD_STANDARD 2
+#define CFI_CMDSET_INTEL_STANDARD 3
+#define CFI_CMDSET_AMD_EXTENDED 4
+#define CFI_CMDSET_MITSU_STANDARD 256
+#define CFI_CMDSET_MITSU_EXTENDED 257
+#define CFI_CMDSET_SST 258
+#define CFI_CMDSET_INTEL_PROG_REGIONS 512
+
+#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
+# undef FLASH_CMD_RESET
+# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
+#endif
+
+#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
+
+typedef union {
+ unsigned char c;
+ unsigned short w;
+ unsigned long l;
+ unsigned long long ll;
+} cfiword_t;
+
+/* CFI standard query structure */
+struct cfi_qry {
+ u8 qry[3];
+ u16 p_id;
+ u16 p_adr;
+ u16 a_id;
+ u16 a_adr;
+ u8 vcc_min;
+ u8 vcc_max;
+ u8 vpp_min;
+ u8 vpp_max;
+ u8 word_write_timeout_typ;
+ u8 buf_write_timeout_typ;
+ u8 block_erase_timeout_typ;
+ u8 chip_erase_timeout_typ;
+ u8 word_write_timeout_max;
+ u8 buf_write_timeout_max;
+ u8 block_erase_timeout_max;
+ u8 chip_erase_timeout_max;
+ u8 dev_size;
+ u16 interface_desc;
+ u16 max_buf_write_size;
+ u8 num_erase_regions;
+ u32 erase_region_info[NUM_ERASE_REGIONS];
+} __attribute__((packed));
+
+struct cfi_pri_hdr {
+ u8 pri[3];
+ u8 major_version;
+ u8 minor_version;
+} __attribute__((packed));
+
+void flash_write_cmd(flash_info_t * info, flash_sect_t sect,
+ uint offset, u32 cmd);
+
+#endif /* __CFI_FLASH_H__ */
--
1.6.5.1
More information about the U-Boot
mailing list