[U-Boot] [PATCH 6/7] mpc85xx: Configure QE UART for MPC8569E-MDS boards

Kumar Gala galak at kernel.crashing.org
Tue Oct 27 16:10:52 CET 2009


On Oct 15, 2009, at 8:47 AM, Anton Vorontsov wrote:

> To make QE UART usable by Linux we should setup pin multiplexing
> and turn UCC2 Ethernet node into UCC2 QE UART node.
>
> Also, QE UART is mutually exclusive with UART0, so we can't enable
> it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype
> board with eSDHC in 1- or 4-bits mode.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> board/freescale/mpc8569mds/bcsr.h       |    1 +
> board/freescale/mpc8569mds/mpc8569mds.c |   98 ++++++++++++++++++++++ 
> ++-------
> 2 files changed, 78 insertions(+), 21 deletions(-)

applied to 85xx

- k


More information about the U-Boot mailing list