[U-Boot] [u-boot] [PATCH][1/2] mx27: Add necessary defines and helper functions to support I2C in i.MX27.
Javier Martin
javier.martin at vista-silicon.com
Fri Oct 30 15:43:20 CET 2009
Add proper register definitions, macros and clock functions required
for I2C driver to be developed.
Signed-off-by: Javier Martin <javier.martin at vista-silicon.com>
--
diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c
index 808371f..540ef0c 100644
--- a/cpu/arm926ejs/mx27/generic.c
+++ b/cpu/arm926ejs/mx27/generic.c
@@ -22,11 +22,21 @@
#include <div64.h>
#include <netdev.h>
#include <asm/io.h>
+#include <asm/arch/asm-offsets.h>
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_MXC_MMC
#include <asm/arch/mxcmmc.h>
#endif
+int imx_get_revision(void)
+{
+ ulong val;
+
+ val = readl(SYSCTRL_CID);
+
+ return (int)(val >> 28);
+}
+
/*
* get the system pll clock in Hz
*
@@ -152,6 +162,19 @@ ulong imx_get_perclk4(void)
return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
}
+ulong imx_get_ipgclk(void)
+{
+ ulong rate, ipg_pdf;
+
+ if (imx_get_revision() >= CHIP_REV_2_0)
+ return imx_get_ahbclk();
+ else
+ ipg_pdf = (readl(CSCR) >> 8) & 1;
+
+ rate = imx_get_ahbclk();
+ return rate / (ipg_pdf + 1);
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
diff --git a/include/asm-arm/arch-mx27/asm-offsets.h b/include/asm-arm/arch-mx27/asm-offsets.h
index 497afe5..cdecef6 100644
--- a/include/asm-arm/arch-mx27/asm-offsets.h
+++ b/include/asm-arm/arch-mx27/asm-offsets.h
@@ -14,3 +14,5 @@
#define ESDCTL1_ROF 0x08
#define ESDCFG1_ROF 0x0C
#define ESDMISC_ROF 0x10
+#define SYSCTRL_CID 0x10027800
+#define CHIP_REV_2_0 0x01
diff --git a/include/asm-arm/arch-mx27/imx-regs.h b/include/asm-arm/arch-mx27/imx-regs.h
index d36a6da..2b89b4e 100644
--- a/include/asm-arm/arch-mx27/imx-regs.h
+++ b/include/asm-arm/arch-mx27/imx-regs.h
@@ -206,6 +206,10 @@ struct iim_regs {
};
#endif
+#define __REG(x) (*((volatile u32 *)(x)))
+#define __REG16(x) (*((volatile u16 *)(x)))
+#define __REG8(x) (*((volatile u8 *)(x)))
+
#define IMX_IO_BASE 0x10000000
#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
--
Javier Martin
Vista Silicon S.L.
CDTUC - FASE C - Oficina S-345
Avda de los Castros s/n
39005- Santander. Cantabria. Spain
+34 942 25 32 60
www.vista-silicon.com
More information about the U-Boot
mailing list