[U-Boot] [PATCH v4 tabify] net: add altera triple speeds ethernet mac driver
Ben Warren
biggerbadderben at gmail.com
Mon Apr 5 08:19:14 CEST 2010
Hi Thomas,
On 3/28/2010 1:32 AM, Thomas Chou wrote:
> This driver supports the Altera triple speeds 10/100/1000 ethernet
> mac.
>
> Signed-off-by: Thomas Chou<thomas at wytron.com.tw>
> ---
> drivers/net/Makefile | 1 +
> drivers/net/altera_tse.c | 978 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/altera_tse.h | 512 ++++++++++++++++++++++++
> include/netdev.h | 1 +
> 4 files changed, 1492 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/altera_tse.c
> create mode 100644 drivers/net/altera_tse.h
>
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 0e68e52..b75c02f 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -27,6 +27,7 @@ LIB := $(obj)libnet.a
>
> COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
> COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
> +COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
> COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
> COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
> COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
> diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
> new file mode 100644
> index 0000000..7a2cb66
> --- /dev/null
> +++ b/drivers/net/altera_tse.c
> @@ -0,0 +1,978 @@
> +/*
> + * Altera 10/100/1000 triple speed ethernet mac driver
> + *
> + * Copyright (C) 2008 Altera Corporation.
> + * Copyright (C) 2010 Thomas Chou<thomas at wytron.com.tw>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include<config.h>
> +#include<common.h>
> +#include<malloc.h>
> +#include<net.h>
> +#include<command.h>
> +#include<asm/cache.h>
> +#include<asm/dma-mapping.h>
> +#include<miiphy.h>
> +#include "altera_tse.h"
> +
> +static int tse_eth_send(struct eth_device *dev, volatile void *packet,
> + int length);
> +static int tse_eth_rx(struct eth_device *dev);
> +static void tse_eth_halt(struct eth_device *dev);
> +static void tse_eth_reset(struct eth_device *dev);
> +static int tse_eth_init(struct eth_device *dev, bd_t *bd);
> +
> +static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum);
> +static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
> + unsigned int value);
>
Are these prototypes really needed? If so, please re-order the code so
they're not.
> +#define read_phy_reg(priv, regnum) tse_mdio_read(priv, regnum)
> +#define write_phy_reg(priv, regnum, value) tse_mdio_write(priv, regnum, value)
> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)&& !defined(BITBANGMII)
> +static int altera_tse_miiphy_write(char *devname, unsigned char addr,
> + unsigned char reg, unsigned short value);
> +static int altera_tse_miiphy_read(char *devname, unsigned char addr,
> + unsigned char reg, unsigned short *value);
> +#endif
> +
> +static int tse_adjust_link(struct altera_tse_priv *priv);
> +
> +static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv);
> +static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv);
> +static uint mii_m88e1111s_setmode_sr(uint mii_reg,
> + struct altera_tse_priv *priv);
> +static uint mii_m88e1111s_setmode_cr(uint mii_reg,
> + struct altera_tse_priv *priv);
> +static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv);
> +
> +static struct phy_info *get_phy_info(struct eth_device *dev);
> +static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd);
> +static int init_phy(struct eth_device *dev);
> +
> +/* sgdma debug - print descriptor */
> +static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
> +{
> + debug("SGDMA DEBUG :\n");
> + debug("desc->source : 0x%x \n", (unsigned int)desc->source);
> + debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
> + debug("desc->next : 0x%x \n", (unsigned int)desc->next);
> + debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
> + debug("desc->destination_pad : 0x%x \n",
> + (unsigned int)desc->destination_pad);
> + debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
> + debug("desc->bytes_to_transfer : 0x%x \n",
> + (unsigned int)desc->bytes_to_transfer);
> + debug("desc->actual_bytes_transferred : 0x%x \n",
> + (unsigned int)desc->actual_bytes_transferred);
> + debug("desc->descriptor_status : 0x%x \n",
> + (unsigned int)desc->descriptor_status);
> + debug("desc->descriptor_control : 0x%x \n",
> + (unsigned int)desc->descriptor_control);
> +}
> +
> +/* This is a generic routine that the SGDMA mode-specific routines
> + * call to populate a descriptor.
> + * arg1 :pointer to first SGDMA descriptor.
> + * arg2 :pointer to next SGDMA descriptor.
> + * arg3 :Address to where data to be written.
> + * arg4 :Address from where data to be read.
> + * arg5 :no of byte to transaction.
> + * arg6 :variable indicating to generate start of packet or not
> + * arg7 :read fixed
> + * arg8 :write fixed
> + * arg9 :read burst
> + * arg10 :write burst
> + * arg11 :atlantic_channel number
> + */
>
11 arguments??? Seriously???
> +static void alt_sgdma_construct_descriptor_burst(
> + volatile struct alt_sgdma_descriptor *desc,
> + volatile struct alt_sgdma_descriptor *next,
> + unsigned int *read_addr,
> + unsigned int *write_addr,
> + unsigned short length_or_eop,
> + int generate_eop,
> + int read_fixed,
> + int write_fixed_or_sop,
> + int read_burst,
> + int write_burst,
> + unsigned char atlantic_channel)
> +{
> + /*
> + * Mark the "next" descriptor as "not" owned by hardware. This prevents
> + * The SGDMA controller from continuing to process the chain. This is
> + * done as a single IO write to bypass cache, without flushing
> + * the entire descriptor, since only the 8-bit descriptor status must
> + * be flushed.
> + */
> + if (!next)
> + debug("Next descriptor not defined!!\n");
> +
> + next->descriptor_control = (next->descriptor_control&
> + ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
> +
> + desc->source = (unsigned int *)((unsigned int)read_addr& 0x1FFFFFFF);
> + desc->destination =
> + (unsigned int *)((unsigned int)write_addr& 0x1FFFFFFF);
> + desc->next = (unsigned int *)((unsigned int)next& 0x1FFFFFFF);
> + desc->source_pad = 0x0;
> + desc->destination_pad = 0x0;
> + desc->next_pad = 0x0;
> + desc->bytes_to_transfer = length_or_eop;
> + desc->actual_bytes_transferred = 0;
> + desc->descriptor_status = 0x0;
> +
> + /* SGDMA burst not currently supported */
> + desc->read_burst = 0;
> + desc->write_burst = 0;
> +
> + /*
> + * Set the descriptor control block as follows:
> + * - Set "owned by hardware" bit
> + * - Optionally set "generate EOP" bit
> + * - Optionally set the "read from fixed address" bit
> + * - Optionally set the "write to fixed address bit (which serves
> + * serves as a "generate SOP" control bit in memory-to-stream mode).
> + * - Set the 4-bit atlantic channel, if specified
> + *
> + * Note that this step is performed after all other descriptor information
> + * has been filled out so that, if the controller already happens to be
> + * pointing at this descriptor, it will not run (via the "owned by
> + * hardware" bit) until all other descriptor information has been set up.
> + */
> +
> + desc->descriptor_control =
> + ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
> + (generate_eop ?
> + ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
> + (read_fixed ?
> + ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
> + (write_fixed_or_sop ?
> + ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
> + (atlantic_channel ? ((atlantic_channel& 0x0F)<< 3) : 0)
> + );
> +}
> +
> +static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
> + volatile struct alt_sgdma_descriptor *desc)
> +{
> + unsigned int status;
> + int counter = 0;
> +
> + /* Wait for any pending transfers to complete */
> + alt_sgdma_print_desc(desc);
> + status = dev->status;
> +
> + counter = 0;
> + while (dev->status& ALT_SGDMA_STATUS_BUSY_MSK) {
> + if (counter++> ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + break;
> + }
> +
> + if (counter>= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + debug("Timeout waiting sgdma in do sync!\n");
> +
> + /*
> + * Clear any (previous) status register information
> + * that might occlude our error checking later.
> + */
> + dev->status = 0xFF;
> +
> + /* Point the controller at the descriptor */
> + dev->next_descriptor_pointer = (unsigned int)desc& 0x1FFFFFFF;
> + debug("next desc in sgdma 0x%x\n",
> + (unsigned int)dev->next_descriptor_pointer);
> +
> + /*
> + * Set up SGDMA controller to:
> + * - Disable interrupt generation
> + * - Run once a valid descriptor is written to controller
> + * - Stop on an error with any particular descriptor
> + */
> + dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
> + ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
> +
> + /* Wait for the descriptor (chain) to complete */
> + status = dev->status;
> + debug("wait for sgdma....");
> + while (dev->status& ALT_SGDMA_STATUS_BUSY_MSK)
> + ;
> + debug("done\n");
> +
> + /* Clear Run */
> + dev->control = (dev->control& (~ALT_SGDMA_CONTROL_RUN_MSK));
> +
> + /* Get& clear status register contents */
> + status = dev->status;
> + dev->status = 0xFF;
> +
> + /* we really should check if the transfer completes properly */
> + debug("tx sgdma status = 0x%x", status);
> + return 0;
> +}
> +
> +static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
> + volatile struct alt_sgdma_descriptor *desc)
> +{
> + unsigned int status;
> + int counter = 0;
> +
> + /* Wait for any pending transfers to complete */
> + alt_sgdma_print_desc(desc);
> + status = dev->status;
> +
> + counter = 0;
> + while (dev->status& ALT_SGDMA_STATUS_BUSY_MSK) {
> + if (counter++> ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + break;
> + }
> +
> + if (counter>= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + debug("Timeout waiting sgdma in do async!\n");
> +
> + /*
> + * Clear any (previous) status register information
> + * that might occlude our error checking later.
> + */
> + dev->status = 0xFF;
> +
> + /* Point the controller at the descriptor */
> + dev->next_descriptor_pointer = (unsigned int)desc& 0x1FFFFFFF;
> +
> + /*
> + * Set up SGDMA controller to:
> + * - Disable interrupt generation
> + * - Run once a valid descriptor is written to controller
> + * - Stop on an error with any particular descriptor
> + */
> + dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
> + ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
> +
> + /* we really should check if the transfer completes properly */
> + return 0;
> +}
> +
> +/* TSE init code */
> +int altera_tse_init(bd_t *bis, int num_tses)
>
The naming convention that we use is xxx_initialize(), or
xxx_register(), although I prefer the former. If you're not using *bis,
don't pass it in.
> +{
> + struct altera_tse_priv *priv;
> + struct eth_device *dev;
> + struct alt_sgdma_descriptor *rx_desc;
> + struct alt_sgdma_descriptor *tx_desc;
> + int num;
> + unsigned long dma_handle;
> +
> + puts("Altera TSE\n");
> +
> + for (num = 0; num< num_tses; num++) {
>
You don't use the 'num' variable. As such, this driver doesn't support
more than one instance. Once you add true multi-instance support, the
preferred way to do this is to call this function for each instance,
passing in the appropriate addressing information.
> + dev = (struct eth_device *)malloc(sizeof *dev);
> +
> + if (NULL == dev)
> + return 0;
> +
> + memset(dev, 0, sizeof *dev);
> +
> + priv = malloc(sizeof(*priv));
> +
> + if (!priv) {
> + free(dev);
> + return 0;
> + }
> +#if CONFIG_SYS_ALTERA_TSE_0_HAS_DESC_MEM
> + tx_desc = (void *)CONFIG_SYS_ALTERA_TSE_0_DESC_MEM_BASE;
> +#else
> + tx_desc =
> + dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
> + &dma_handle);
> +#endif
> + rx_desc = tx_desc + 2;
> + debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
> + debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
> +
> + if (!tx_desc) {
> + free(priv);
> + free(dev);
> + return 0;
> + }
> + memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
> + memset(tx_desc, 0, (sizeof *tx_desc) * 2);
> +
> + /* initialize tse priv */
> + SET_ALTERA_TSE_INFO(priv, 0);
> + priv->rx_desc = rx_desc;
> + priv->tx_desc = tx_desc;
> +
> + /* init eth structure */
> + sprintf(dev->name, priv->devname);
> + dev->iobase = 0;
> + dev->priv = priv;
> + dev->init = tse_eth_init;
> + dev->halt = tse_eth_halt;
> + dev->send = tse_eth_send;
> + dev->recv = tse_eth_rx;
> +
> + eth_register(dev);
> +
> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)&& !defined(BITBANGMII)
> + miiphy_register(dev->name, altera_tse_miiphy_read,
> + altera_tse_miiphy_write);
> +#endif
> +
> + init_phy(dev);
>
> + }
> +
> + return num_tses;
>
This return value is meaningless, as mentioned above.
> +}
> +
> +/* u-boot interface */
> +static int tse_adjust_link(struct altera_tse_priv *priv)
> +{
> + unsigned int refvar;
> + alt_tse_mac *mac_dev = priv->mac_dev;
> +
> + refvar = mac_dev->command_config.image;
> +
> + if (!(priv->duplexity))
> + refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
> + else
> + refvar&= ~ALTERA_TSE_CMD_HD_ENA_MSK;
> +
> + switch (priv->speed) {
> + case 1000:
> + refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
> + refvar&= ~ALTERA_TSE_CMD_ENA_10_MSK;
> + break;
> + case 100:
> + refvar&= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
> + refvar&= ~ALTERA_TSE_CMD_ENA_10_MSK;
> + break;
> + case 10:
> + refvar&= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
> + refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
> + break;
> + }
> + mac_dev->command_config.image = refvar;
> +
> + return 0;
> +}
> +
> +static int tse_eth_send(struct eth_device *dev,
> + volatile void *packet, int length)
> +{
> + struct altera_tse_priv *priv = dev->priv;
> + struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
> + volatile struct alt_sgdma_descriptor *tx_desc =
> + (volatile struct alt_sgdma_descriptor *)priv->tx_desc;
> +
> + volatile struct alt_sgdma_descriptor *tx_desc_cur =
> + (volatile struct alt_sgdma_descriptor *)&tx_desc[0];
> +
> + flush_dcache((unsigned long)packet, length);
> + alt_sgdma_construct_descriptor_burst(
> + (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
> + (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
> + (unsigned int *)packet, /* read addr */
> + (unsigned int *)0,
> + length, /* length or EOP ,will change for each tx */
> + 0x1, /* gen eop */
> + 0x0, /* read fixed */
> + 0x1, /* write fixed or sop */
> + 0x0, /* read burst */
> + 0x0, /* write burst */
> + 0x0 /* channel */
> + );
> + debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
> +
> + /* send the packet */
> + debug("sending packet\n");
> + alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
> + debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
> + return tx_desc_cur->actual_bytes_transferred;
> +}
> +
> +static int tse_eth_rx(struct eth_device *dev)
> +{
> + int packet_length = 0;
> + struct altera_tse_priv *priv = dev->priv;
> + volatile struct alt_sgdma_descriptor *rx_desc =
> + (volatile struct alt_sgdma_descriptor *)priv->rx_desc;
> + volatile struct alt_sgdma_descriptor *rx_desc_cur =&rx_desc[0];
> + debug("eth_rx: sgdma status = 0x%x\n", rx_sgdma->status);
> + debug("eth_rx: sgdma control = 0x%x\n", rx_sgdma->control);
> + debug("mac rx errors : %d\n", mac_dev->ifInErrors);
> +
> + if (rx_desc_cur->descriptor_status&
> + ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
> + debug("got packet\n");
> + packet_length = rx_desc->actual_bytes_transferred;
> + NetReceive(NetRxPackets[0], packet_length);
> +
> + /* start descriptor again */
> + flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
> + alt_sgdma_construct_descriptor_burst(
> + (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
> + (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
> + (unsigned int)0x0, /* read addr */
> + (unsigned int *)NetRxPackets[0],
> + 0x0, /* length or EOP */
> + 0x0, /* gen eop */
> + 0x0, /* read fixed */
> + 0x0, /* write fixed or sop */
> + 0x0, /* read burst */
> + 0x0, /* write burst */
> + 0x0 /* channel */
> + );
> +
> + /* setup the sgdma */
> + alt_sgdma_do_async_transfer(priv->sgdma_rx,&rx_desc[0]);
> + }
> +
> + return -1;
> +}
> +
> +static void tse_eth_halt(struct eth_device *dev)
> +{
> + /* don't do anything! */
> + /* this gets called after each uboot */
> + /* network command. don't need to reset the thing all of the time */
> +}
> +
> +static void tse_eth_reset(struct eth_device *dev)
> +{
> + /* stop sgdmas, disable tse receive */
> + struct altera_tse_priv *priv = dev->priv;
> + alt_tse_mac *mac_dev = priv->mac_dev;
> + struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
> + struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
> + int counter;
> + volatile struct alt_sgdma_descriptor *rx_desc =
> + (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
> +
> + /* clear rx desc& wait for sgdma to complete */
> + rx_desc->descriptor_control = 0;
> + rx_sgdma->control = 0;
> + counter = 0;
> + while (rx_sgdma->status& ALT_SGDMA_STATUS_BUSY_MSK) {
> + if (counter++> ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + break;
> + }
> +
> + if (counter>= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
> + debug("Timeout waiting for rx sgdma!\n");
> + rx_sgdma->control&= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
> + rx_sgdma->control&= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
> + }
> +
> + counter = 0;
> + tx_sgdma->control = 0;
> + while (tx_sgdma->status& ALT_SGDMA_STATUS_BUSY_MSK) {
> + if (counter++> ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
> + break;
> + }
> +
> + if (counter>= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
> + debug("Timeout waiting for tx sgdma!\n");
> + tx_sgdma->control&= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
> + tx_sgdma->control&= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
> + }
> + /* reset the mac */
> + mac_dev->command_config.bits.transmit_enable = 1;
> + mac_dev->command_config.bits.receive_enable = 1;
> + mac_dev->command_config.bits.software_reset = 1;
> +
> + counter = 0;
> + while (mac_dev->command_config.bits.software_reset) {
> + if (counter++> ALT_TSE_SW_RESET_WATCHDOG_CNTR)
> + break;
> + }
> +
> + if (counter>= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
> + debug("TSEMAC SW reset bit never cleared!\n");
> +}
> +
> +static int tse_eth_init(struct eth_device *dev, bd_t * bd)
> +{
> + int dat;
> + struct altera_tse_priv *priv = dev->priv;
> + alt_tse_mac *mac_dev = priv->mac_dev;
> + volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
> + volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
> + volatile struct alt_sgdma_descriptor *rx_desc_cur =
> + (volatile struct alt_sgdma_descriptor *)&rx_desc[0];
> +
> + /* stop controller */
> + debug("Reseting TSE& SGDMAs\n");
> + tse_eth_reset(dev);
> +
> + /* start the phy */
> + debug("Configuring PHY\n");
> + phy_run_commands(priv, priv->phyinfo->startup);
> +
> + /* need to create sgdma */
> + debug("Configuring tx desc\n");
> + alt_sgdma_construct_descriptor_burst(
> + (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
> + (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
> + (unsigned int *)NULL, /* read addr */
> + (unsigned int *)0,
> + 0, /* length or EOP ,will change for each tx */
> + 0x1, /* gen eop */
> + 0x0, /* read fixed */
> + 0x1, /* write fixed or sop */
> + 0x0, /* read burst */
> + 0x0, /* write burst */
> + 0x0 /* channel */
> + );
> + debug("Configuring rx desc\n");
> + flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
> + alt_sgdma_construct_descriptor_burst(
> + (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
> + (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
> + (unsigned int)0x0, /* read addr */
> + (unsigned int *)NetRxPackets[0],
> + 0x0, /* length or EOP */
> + 0x0, /* gen eop */
> + 0x0, /* read fixed */
> + 0x0, /* write fixed or sop */
> + 0x0, /* read burst */
> + 0x0, /* write burst */
> + 0x0 /* channel */
> + );
> + /* start rx async transfer */
> + debug("Starting rx sgdma\n");
> + alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
> +
> + /* start TSE */
> + debug("Configuring TSE Mac\n");
> + /* Initialize MAC registers */
> + mac_dev->max_frame_length = PKTSIZE_ALIGN;
> + mac_dev->rx_almost_empty_threshold = 8;
> + mac_dev->rx_almost_full_threshold = 8;
> + mac_dev->tx_almost_empty_threshold = 8;
> + mac_dev->tx_almost_full_threshold = 3;
> + mac_dev->tx_sel_empty_threshold =
> + CONFIG_SYS_ALTERA_TSE_0_TXFIFO_DEPTH - 16;
> + mac_dev->tx_sel_full_threshold = 0;
> + mac_dev->rx_sel_empty_threshold =
> + CONFIG_SYS_ALTERA_TSE_0_RXFIFO_DEPTH - 16;
> + mac_dev->rx_sel_full_threshold = 0;
> +
> + /* NO Shift */
> + mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
> + mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
> +
> + /* enable MAC */
> + dat = 0;
> + dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
> +
> + mac_dev->command_config.image = dat;
> +
> + /* Set the MAC address */
> + debug("Setting MAC address to 0x%x%x%x%x%x%x\n",
> + dev->enetaddr[5], dev->enetaddr[4],
> + dev->enetaddr[3], dev->enetaddr[2],
> + dev->enetaddr[1], dev->enetaddr[0]);
> + mac_dev->mac_addr_0 = ((dev->enetaddr[3])<< 24 |
> + (dev->enetaddr[2])<< 16 |
> + (dev->enetaddr[1])<< 8 | (dev->enetaddr[0]));
> +
> + mac_dev->mac_addr_1 = ((dev->enetaddr[5]<< 8 |
> + (dev->enetaddr[4]))& 0xFFFF);
> +
> + /* Set the MAC address */
> + mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
> + mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
> +
> + /* Set the MAC address */
> + mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
> + mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
> +
> + /* Set the MAC address */
> + mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
> + mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
> +
> + /* Set the MAC address */
> + mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
> + mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
> +
>
Please put the MAC address programming code in a separate function,
taking a eth_dev * as parameter. It may save you work later.
> + /* configure the TSE core */
> + /* -- output clocks, */
> + /* -- and later config stuff for SGMII */
> + if (priv->link) {
> + debug("Adjusting TSE to link speed\n");
> + tse_adjust_link(priv);
> + }
> +
> + return priv->link ? 0 : -1;
> +}
> +
> +/*
> + * PHY& MDIO code
> + * Need to add SGMII stuff
> + *
> + */
> +
> +static struct phy_info phy_info_M88E1111S = {
> + 0x01410cc,
> + "Marvell 88E1111S",
> + 4,
> + (struct phy_cmd[]){ /* config */
> + /* Reset and configure the PHY */
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_88E1111_PHY_EXT_SR, 0x848f,
> + &mii_m88e1111s_setmode_sr},
> + /* Delay RGMII TX and RX */
> + {MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
> + &mii_m88e1111s_setmode_cr},
> + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_INIT,&mii_cr_init},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + /* Status is read once to clear old link state */
> + {MIIM_STATUS, miim_read, NULL},
> + /* Auto-negotiate */
> + {MIIM_STATUS, miim_read,&mii_parse_sr},
> + /* Read the status */
> + {MIIM_88E1011_PHY_STATUS, miim_read,
> + &mii_parse_88E1011_psr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + },
> +};
> +
> +/* a generic flavor. */
> +static struct phy_info phy_info_generic = {
> + 0,
> + "Unknown/Generic PHY",
> + 32,
> + (struct phy_cmd[]){ /* config */
> + {PHY_BMCR, PHY_BMCR_RESET, NULL},
> + {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + {PHY_BMSR, miim_read, NULL},
> + {PHY_BMSR, miim_read,&mii_parse_sr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + }
> +};
> +
> +static struct phy_info *phy_info[] = {
> + &phy_info_M88E1111S,
> + NULL
> +};
> +
> + /* Grab the identifier of the device's PHY, and search through
> + * all of the known PHYs to see if one matches. If so, return
> + * it, if not, return NULL
> + */
> +static struct phy_info *get_phy_info(struct eth_device *dev)
> +{
> + struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
> + uint phy_reg, phy_ID;
> + int i;
> + struct phy_info *theInfo = NULL;
> +
> + /* Grab the bits from PHYIR1, and put them in the upper half */
> + phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
> + phy_ID = (phy_reg& 0xffff)<< 16;
> +
> + /* Grab the bits from PHYIR2, and put them in the lower half */
> + phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
> + phy_ID |= (phy_reg& 0xffff);
> +
> + /* loop through all the known PHY types, and find one that */
> + /* matches the ID we read from the PHY. */
> + for (i = 0; phy_info[i]; i++) {
> + if (phy_info[i]->id == (phy_ID>> phy_info[i]->shift)) {
> + theInfo = phy_info[i];
> + break;
> + }
> + }
> +
> + if (theInfo == NULL) {
> + theInfo =&phy_info_generic;
> + debug("%s: No support for PHY id %x; assuming generic\n",
> + dev->name, phy_ID);
> + } else
> + debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
> +
> + return theInfo;
> +}
> +
> +/* Execute the given series of commands on the given device's
> + * PHY, running functions as necessary
> + */
> +static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
> +{
> + int i;
> + uint result;
> +
> + for (i = 0; cmd->mii_reg != miim_end; i++) {
> + if (cmd->mii_data == miim_read) {
> + result = tse_mdio_read(priv, cmd->mii_reg);
> +
> + if (cmd->funct != NULL)
> + (*(cmd->funct)) (result, priv);
> +
> + } else {
> + if (cmd->funct != NULL)
> + result = (*(cmd->funct)) (cmd->mii_reg, priv);
> + else
> + result = cmd->mii_data;
> +
> + tse_mdio_write(priv, cmd->mii_reg, result);
> +
> + }
> + cmd++;
> + }
> +}
> +
> +/* Phy init code */
> +static int init_phy(struct eth_device *dev)
> +{
> + struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
> + struct phy_info *curphy;
> +
> + /* Get the cmd structure corresponding to the attached
> + * PHY */
> + curphy = get_phy_info(dev);
> +
> + if (curphy == NULL) {
> + priv->phyinfo = NULL;
> + printf("%s: No PHY found\n", dev->name);
> +
> + return 0;
> + } else
> + printf("%s found\n", curphy->name);
> + priv->phyinfo = curphy;
> +
> + phy_run_commands(priv, priv->phyinfo->config);
> +
> + return 1;
> +}
> +
> +/*
> + * Also copied from tsec.c
> + */
> +/* Parse the status register for link, and then do
> + * auto-negotiation
> + */
> +static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
> +{
> + /*
> + * Wait if the link is up, and autonegotiation is in progress
> + * (ie - we're capable and it's not done)
> + */
> + mii_reg = tse_mdio_read(priv, MIIM_STATUS);
> +
> + if (!(mii_reg& MIIM_STATUS_LINK)&& (mii_reg& PHY_BMSR_AUTN_ABLE)
> + && !(mii_reg& PHY_BMSR_AUTN_COMP)) {
> + int i = 0;
> +
> + puts("Waiting for PHY auto negotiation to complete");
> + while (!(mii_reg& PHY_BMSR_AUTN_COMP)) {
> + /*
> + * Timeout reached ?
> + */
> + if (i> PHY_AUTONEGOTIATE_TIMEOUT) {
> + puts(" TIMEOUT !\n");
> + priv->link = 0;
> + return 0;
> + }
> +
> + if ((i++ % 1000) == 0)
> + putc('.');
> + udelay(1000); /* 1 ms */
> + mii_reg = tse_mdio_read(priv, MIIM_STATUS);
> + }
> + puts(" done\n");
> + priv->link = 1;
> + udelay(500000); /* another 500 ms (results in faster booting) */
> + } else {
> + if (mii_reg& MIIM_STATUS_LINK) {
> + debug("Link is up\n");
> + priv->link = 1;
> + } else {
> + debug("Link is down\n");
> + priv->link = 0;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* Parse the 88E1011's status register for speed and duplex
> + * information
> + */
> +static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
> +{
> + uint speed;
> +
> + mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
> +
> + if ((mii_reg& MIIM_88E1011_PHYSTAT_LINK)&&
> + !(mii_reg& MIIM_88E1011_PHYSTAT_SPDDONE)) {
> + int i = 0;
> +
> + puts("Waiting for PHY realtime link");
> + while (!(mii_reg& MIIM_88E1011_PHYSTAT_SPDDONE)) {
> + /* Timeout reached ? */
> + if (i> PHY_AUTONEGOTIATE_TIMEOUT) {
> + puts(" TIMEOUT !\n");
> + priv->link = 0;
> + break;
> + }
> +
> + if ((i++ == 1000) == 0) {
> + i = 0;
> + puts(".");
> + }
> + udelay(1000); /* 1 ms */
> + mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
> + }
> + puts(" done\n");
> + udelay(500000); /* another 500 ms (results in faster booting) */
> + } else {
> + if (mii_reg& MIIM_88E1011_PHYSTAT_LINK)
> + priv->link = 1;
> + else
> + priv->link = 0;
> + }
> +
> + if (mii_reg& MIIM_88E1011_PHYSTAT_DUPLEX)
> + priv->duplexity = 1;
> + else
> + priv->duplexity = 0;
> +
> + speed = (mii_reg& MIIM_88E1011_PHYSTAT_SPEED);
> +
> + switch (speed) {
> + case MIIM_88E1011_PHYSTAT_GBIT:
> + priv->speed = 1000;
> + debug("PHY Speed is 1000Mbit\n");
> + break;
> + case MIIM_88E1011_PHYSTAT_100:
> + debug("PHY Speed is 100Mbit\n");
> + priv->speed = 100;
> + break;
> + default:
> + debug("PHY Speed is 10Mbit\n");
> + priv->speed = 10;
> + }
> +
> + return 0;
> +}
> +
> +static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
> +{
> + uint mii_data = tse_mdio_read(priv, mii_reg);
> + mii_data&= 0xfff0;
> + mii_data |= 0xb;
> + return mii_data;
> +}
> +
> +static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
> +{
> + uint mii_data = tse_mdio_read(priv, mii_reg);
> + mii_data&= ~0x82;
> + mii_data |= 0x82;
> + return mii_data;
> +}
> +
> +/*
> + * Returns which value to write to the control register.
> + * For 10/100, the value is slightly different
> + */
> +static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
> +{
> + return MIIM_CONTROL_INIT;
> +}
> +
> +static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
> +{
> + alt_tse_mac *mac_dev;
> + unsigned int *mdio_regs;
> + unsigned int data;
> + u16 value;
> +
> + mac_dev = priv->mac_dev;
> +
> + /* set mdio address */
> + mac_dev->mdio_phy1_addr = priv->phyaddr;
> + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
> +
> + /* get the data */
> + data = mdio_regs[regnum];
> +
> + value = data& 0xffff;
> +
> + return value;
> +}
> +
> +static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
> + unsigned int value)
> +{
> + alt_tse_mac *mac_dev;
> + unsigned int *mdio_regs;
> + unsigned int data;
> +
> + mac_dev = priv->mac_dev;
> +
> + /* set mdio address */
> + mac_dev->mdio_phy1_addr = priv->phyaddr;
> + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
> +
> + /* get the data */
> + data = (unsigned int)value;
> +
> + mdio_regs[regnum] = data;
> +
> + return 0;
> +}
> +
> +/* MDIO access to phy */
> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)&& !defined(BITBANGMII)
> +static int altera_tse_miiphy_write(char *devname, unsigned char addr,
> + unsigned char reg, unsigned short value)
> +{
> + struct eth_device *dev;
> + struct altera_tse_priv *priv;
> + dev = eth_get_dev_by_name(devname);
> + priv = dev->priv;
> +
> + tse_mdio_write(priv, (uint) reg, (uint) value);
> +
> + return 0;
> +}
> +
> +static int altera_tse_miiphy_read(char *devname, unsigned char addr,
> + unsigned char reg, unsigned short *value)
> +{
> + struct eth_device *dev;
> + struct altera_tse_priv *priv;
> + alt_tse_mac *mac_dev;
> + unsigned int *mdio_regs;
> +
> + dev = eth_get_dev_by_name(devname);
> + priv = dev->priv;
> +
> + mac_dev = priv->mac_dev;
> + mac_dev->mdio_phy1_addr = (int)addr;
> + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
> +
> + *value = 0xffff& mdio_regs[reg];
> +
> + return 0;
> +
> +}
> +#endif
> diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h
> new file mode 100644
> index 0000000..1b9a956
> --- /dev/null
> +++ b/drivers/net/altera_tse.h
> @@ -0,0 +1,512 @@
> +/*
> + * Altera 10/100/1000 triple speed ethernet mac
> + *
> + * Copyright (C) 2008 Altera Corporation.
> + * Copyright (C) 2010 Thomas Chou<thomas at wytron.com.tw>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef _ALTERA_TSE_H_
> +#define _ALTERA_TSE_H_
> +
> +#define __packed_1_ __attribute__ ((packed, aligned(1)))
> +
> +/* PHY Stuff */
> +#define miim_end -2
> +#define miim_read -1
> +
> +#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
> +
> +#ifndef CONFIG_SYS_TBIPA_VALUE
> +#define CONFIG_SYS_TBIPA_VALUE 0x1f
> +#endif
> +#define MIIMCFG_INIT_VALUE 0x00000003
> +#define MIIMCFG_RESET 0x80000000
> +
> +#define MIIMIND_BUSY 0x00000001
> +#define MIIMIND_NOTVALID 0x00000004
> +
> +#define MIIM_CONTROL 0x00
> +#define MIIM_CONTROL_RESET 0x00009140
> +#define MIIM_CONTROL_INIT 0x00001140
> +#define MIIM_CONTROL_RESTART 0x00001340
> +#define MIIM_ANEN 0x00001000
> +
> +#define MIIM_CR 0x00
> +#define MIIM_CR_RST 0x00008000
> +#define MIIM_CR_INIT 0x00001000
> +
> +#define MIIM_STATUS 0x1
> +#define MIIM_STATUS_AN_DONE 0x00000020
> +#define MIIM_STATUS_LINK 0x0004
> +#define PHY_BMSR_AUTN_ABLE 0x0008
> +#define PHY_BMSR_AUTN_COMP 0x0020
> +
> +#define MIIM_PHYIR1 0x2
> +#define MIIM_PHYIR2 0x3
> +
> +#define MIIM_ANAR 0x4
> +#define MIIM_ANAR_INIT 0x1e1
> +
> +#define MIIM_TBI_ANLPBPA 0x5
> +#define MIIM_TBI_ANLPBPA_HALF 0x00000040
> +#define MIIM_TBI_ANLPBPA_FULL 0x00000020
> +
> +#define MIIM_TBI_ANEX 0x6
> +#define MIIM_TBI_ANEX_NP 0x00000004
> +#define MIIM_TBI_ANEX_PRX 0x00000002
> +
> +#define MIIM_GBIT_CONTROL 0x9
> +#define MIIM_GBIT_CONTROL_INIT 0xe00
> +
> +#define MIIM_EXT_PAGE_ACCESS 0x1f
> +
> +/* 88E1011 PHY Status Register */
> +#define MIIM_88E1011_PHY_STATUS 0x11
> +#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
> +#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
> +#define MIIM_88E1011_PHYSTAT_100 0x4000
> +#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
> +#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
> +#define MIIM_88E1011_PHYSTAT_LINK 0x0400
> +
> +#define MIIM_88E1011_PHY_SCR 0x10
> +#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
> +
> +#define MIIM_88E1111_PHY_EXT_CR 0x14
> +#define MIIM_88E1111_PHY_EXT_SR 0x1b
> +
> +/* 88E1111 PHY LED Control Register */
> +#define MIIM_88E1111_PHY_LED_CONTROL 24
> +#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
> +#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
> +
> +#define MIIM_READ_COMMAND 0x00000001
> +
> +/* struct phy_info: a structure which defines attributes for a PHY
> + * id will contain a number which represents the PHY. During
> + * startup, the driver will poll the PHY to find out what its
> + * UID--as defined by registers 2 and 3--is. The 32-bit result
> + * gotten from the PHY will be shifted right by "shift" bits to
> + * discard any bits which may change based on revision numbers
> + * unimportant to functionality
> + *
> + * The struct phy_cmd entries represent pointers to an arrays of
> + * commands which tell the driver what to do to the PHY.
> + */
> +struct phy_info {
> + uint id;
> + char *name;
> + uint shift;
> + /* Called to configure the PHY, and modify the controller
> + * based on the results */
> + struct phy_cmd *config;
> +
> + /* Called when starting up the controller */
> + struct phy_cmd *startup;
> +
> + /* Called when bringing down the controller */
> + struct phy_cmd *shutdown;
> +};
> +
> +/* SGDMA Stuff */
> +#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
> +#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
> +#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004)
> +#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
> +#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
> +
> +#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
> +#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
> +#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
> +#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
> +#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
> +#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
> +#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
> +#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
> +#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
> +#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
> +#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
> +#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
> +
> +#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
> + | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
> + | ALT_SGDMA_CONTROL_IE_GLOBAL_MSK)
> +
> +/*
> + * Descriptor control bit masks& offsets
> + *
> + * Note: The control byte physically occupies bits [31:24] in memory.
> + * The following bit-offsets are expressed relative to the LSB of
> + * the control register bitfield.
> + */
> +#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001)
> +#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002)
> +#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004)
> +#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008)
> +#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080)
> +
> +/*
> + * Descriptor status bit masks& offsets
> + *
> + * Note: The status byte physically occupies bits [23:16] in memory.
> + * The following bit-offsets are expressed relative to the LSB of
> + * the status register bitfield.
> + */
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080)
> +#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F)
> +
> +/*
> + * The SGDMA controller buffer descriptor allocates
> + * 64 bits for each address. To support ANSI C, the
> + * struct implementing a descriptor places 32-bits
> + * of padding directly above each address; each pad must
> + * be cleared when initializing a descriptor.
> + */
> +
> +/*
> + * Buffer Descriptor data structure
> + *
> + */
> +struct alt_sgdma_descriptor {
> + unsigned int *source; /* the address of data to be read. */
> + unsigned int source_pad;
> +
> + unsigned int *destination; /* the address to write data */
> + unsigned int destination_pad;
> +
> + unsigned int *next; /* the next descriptor in the list. */
> + unsigned int next_pad;
> +
> + unsigned short bytes_to_transfer; /* the number of bytes to transfer */
> + unsigned char read_burst;
> + unsigned char write_burst;
> +
> + unsigned short actual_bytes_transferred;/* bytes transferred by DMA */
> + unsigned char descriptor_status;
> + unsigned char descriptor_control;
> +
> +} __packed_1_;
> +
> +/* SG-DMA Control/Status Slave registers map */
> +
> +struct alt_sgdma_registers {
> + unsigned int status;
> + unsigned int status_pad[3];
> + unsigned int control;
> + unsigned int control_pad[3];
> + unsigned int next_descriptor_pointer;
> + unsigned int descriptor_pad[3];
> +};
> +
> +/* TSE Stuff */
> +#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001)
> +#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002)
> +#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004)
> +#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008)
> +#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010)
> +#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020)
> +#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040)
> +#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080)
> +#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100)
> +#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200)
> +#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400)
> +#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800)
> +#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000)
> +#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000)
> +#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000)
> +#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000)
> +/* Bits (18:16) = address select */
> +#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000)
> +#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000)
> +#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000)
> +#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000)
> +#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000)
> +#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000)
> +#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000)
> +#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000)
> +#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000)
> +/* Bits (30..27) reserved */
> +#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000)
> +
> +#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000)
> +#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000)
> +
> +#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
> +
> +#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
> +#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
> +
> +#define SET_ALTERA_TSE_INFO(x, num) \
> +{ \
> + sprintf(x->devname, CONFIG_SYS_ALTERA_TSE_##num##_NAME); \
> + x->mac_dev = (alt_tse_mac *) CONFIG_SYS_ALTERA_TSE_##num##_BASE; \
> + x->sgdma_rx = (struct alt_sgdma_registers *) \
> + CONFIG_SYS_ALTERA_TSE_##num##_SGDMA_RX_BASE; \
> + x->sgdma_tx = (struct alt_sgdma_registers *) \
> + CONFIG_SYS_ALTERA_TSE_##num##_SGDMA_TX_BASE; \
> + x->rx_sgdma_irq = (unsigned int) \
> + CONFIG_SYS_ALTERA_TSE_##num##_SGDMA_RX_IRQ; \
> + x->tx_sgdma_irq = (unsigned int) \
> + CONFIG_SYS_ALTERA_TSE_##num##_SGDMA_TX_IRQ; \
> + x->has_descriptor_mem = (unsigned int) \
> + CONFIG_SYS_ALTERA_TSE_##num##_HAS_DESC_MEM; \
> + x->descriptor_mem_base = (unsigned int) \
> + CONFIG_SYS_ALTERA_TSE_##num##_DESC_MEM_BASE; \
> + x->descriptor_mem_size = (unsigned int) \
> + CONFIG_SYS_ALTERA_TSE_##num##_DESC_MEM_SPAN; \
> + x->phyaddr = (unsigned int) CONFIG_SYS_ALTERA_TSE_##num##_PHY_ADDR; \
> + x->flags = (unsigned int) CONFIG_SYS_ALTERA_TSE_##num##_FLAGS; \
> + x->link = (unsigned int) 0; \
> + x->duplexity = (unsigned int) 0; \
> + x->speed = (unsigned int) 0; \
> +}
> +
> +/* Command_Config Register Bit Definitions */
> +
> +typedef volatile union __alt_tse_command_config {
> + unsigned int image;
> + struct {
> + unsigned int
> + transmit_enable:1, /* bit 0 */
> + receive_enable:1, /* bit 1 */
> + pause_frame_xon_gen:1, /* bit 2 */
> + ethernet_speed:1, /* bit 3 */
> + promiscuous_enable:1, /* bit 4 */
> + pad_enable:1, /* bit 5 */
> + crc_forward:1, /* bit 6 */
> + pause_frame_forward:1, /* bit 7 */
> + pause_frame_ignore:1, /* bit 8 */
> + set_mac_address_on_tx:1, /* bit 9 */
> + halfduplex_enable:1, /* bit 10 */
> + excessive_collision:1, /* bit 11 */
> + late_collision:1, /* bit 12 */
> + software_reset:1, /* bit 13 */
> + multicast_hash_mode_sel:1, /* bit 14 */
> + loopback_enable:1, /* bit 15 */
> + src_mac_addr_sel_on_tx:3, /* bit 18:16 */
> + magic_packet_detect:1, /* bit 19 */
> + sleep_mode_enable:1, /* bit 20 */
> + wake_up_request:1, /* bit 21 */
> + pause_frame_xoff_gen:1, /* bit 22 */
> + control_frame_enable:1, /* bit 23 */
> + payload_len_chk_disable:1, /* bit 24 */
> + enable_10mbps_intf:1, /* bit 25 */
> + rx_error_discard_enable:1, /* bit 26 */
> + reserved_bits:4, /* bit 30:27 */
> + self_clear_counter_reset:1; /* bit 31 */
> + } __packed_1_ bits;
> +} __packed_1_ alt_tse_command_config;
> +
> +/* Tx_Cmd_Stat Register Bit Definitions */
> +
> +typedef volatile union __alt_tse_tx_cmd_stat {
> + unsigned int image;
> + struct {
> + unsigned int reserved_lsbs:17, /* bit 16:0 */
> + omit_crc:1, /* bit 17 */
> + tx_shift16:1, /* bit 18 */
> + reserved_msbs:13; /* bit 31:19 */
> +
> + } __packed_1_ bits;
> +} alt_tse_tx_cmd_stat;
> +
> +/* Rx_Cmd_Stat Register Bit Definitions */
> +
> +typedef volatile union __alt_tse_rx_cmd_stat {
> + unsigned int image;
> + struct {
> + unsigned int reserved_lsbs:25, /* bit 24:0 */
> + rx_shift16:1, /* bit 25 */
> + reserved_msbs:6; /* bit 31:26 */
> +
> + } __packed_1_ bits;
> +} alt_tse_rx_cmd_stat;
> +
> +struct alt_tse_mdio {
> + unsigned int control; /*PHY device operation control register */
> + unsigned int status; /*PHY device operation status register */
> + unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */
> + unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */
> + unsigned int auto_negotiation_advertisement;
> + unsigned int remote_partner_base_page_ability;
> +
> + unsigned int reg6;
> + unsigned int reg7;
> + unsigned int reg8;
> + unsigned int reg9;
> + unsigned int rega;
> + unsigned int regb;
> + unsigned int regc;
> + unsigned int regd;
> + unsigned int rege;
> + unsigned int regf;
> + unsigned int reg10;
> + unsigned int reg11;
> + unsigned int reg12;
> + unsigned int reg13;
> + unsigned int reg14;
> + unsigned int reg15;
> + unsigned int reg16;
> + unsigned int reg17;
> + unsigned int reg18;
> + unsigned int reg19;
> + unsigned int reg1a;
> + unsigned int reg1b;
> + unsigned int reg1c;
> + unsigned int reg1d;
> + unsigned int reg1e;
> + unsigned int reg1f;
> +};
> +
> +/* MAC register Space */
> +
> +typedef volatile struct {
> + unsigned int megacore_revision;
> + unsigned int scratch_pad;
> + alt_tse_command_config command_config;
> + unsigned int mac_addr_0;
> + unsigned int mac_addr_1;
> + unsigned int max_frame_length;
> + unsigned int pause_quanta;
> + unsigned int rx_sel_empty_threshold;
> + unsigned int rx_sel_full_threshold;
> + unsigned int tx_sel_empty_threshold;
> + unsigned int tx_sel_full_threshold;
> + unsigned int rx_almost_empty_threshold;
> + unsigned int rx_almost_full_threshold;
> + unsigned int tx_almost_empty_threshold;
> + unsigned int tx_almost_full_threshold;
> + unsigned int mdio_phy0_addr;
> + unsigned int mdio_phy1_addr;
> +
> + /* only if 100/1000 BaseX PCS, reserved otherwise */
> + unsigned int reservedx44[5];
> +
> + unsigned int reg_read_access_status;
> + unsigned int min_tx_ipg_length;
> +
> + /* IEEE 802.3 oEntity Managed Object Support */
> + unsigned int aMACID_1; /*The MAC addresses */
> + unsigned int aMACID_2;
> + unsigned int aFramesTransmittedOK;
> + unsigned int aFramesReceivedOK;
> + unsigned int aFramesCheckSequenceErrors;
> + unsigned int aAlignmentErrors;
> + unsigned int aOctetsTransmittedOK;
> + unsigned int aOctetsReceivedOK;
> +
> + /* IEEE 802.3 oPausedEntity Managed Object Support */
> + unsigned int aTxPAUSEMACCtrlFrames;
> + unsigned int aRxPAUSEMACCtrlFrames;
> +
> + /* IETF MIB (MIB-II) Object Support */
> + unsigned int ifInErrors;
> + unsigned int ifOutErrors;
> + unsigned int ifInUcastPkts;
> + unsigned int ifInMulticastPkts;
> + unsigned int ifInBroadcastPkts;
> + unsigned int ifOutDiscards;
> + unsigned int ifOutUcastPkts;
> + unsigned int ifOutMulticastPkts;
> + unsigned int ifOutBroadcastPkts;
> +
> + /* IETF RMON MIB Object Support */
> + unsigned int etherStatsDropEvent;
> + unsigned int etherStatsOctets;
> + unsigned int etherStatsPkts;
> + unsigned int etherStatsUndersizePkts;
> + unsigned int etherStatsOversizePkts;
> + unsigned int etherStatsPkts64Octets;
> + unsigned int etherStatsPkts65to127Octets;
> + unsigned int etherStatsPkts128to255Octets;
> + unsigned int etherStatsPkts256to511Octets;
> + unsigned int etherStatsPkts512to1023Octets;
> + unsigned int etherStatsPkts1024to1518Octets;
> +
> + unsigned int etherStatsPkts1519toXOctets;
> + unsigned int etherStatsJabbers;
> + unsigned int etherStatsFragments;
> +
> + unsigned int reservedxE4;
> +
> + /*FIFO control register. */
> + alt_tse_tx_cmd_stat tx_cmd_stat;
> + alt_tse_rx_cmd_stat rx_cmd_stat;
> +
> + unsigned int ipaccTxConf;
> + unsigned int ipaccRxConf;
> + unsigned int ipaccRxStat;
> + unsigned int ipaccRxStatSum;
> +
> + /*Multicast address resolution table */
> + unsigned int hash_table[64];
> +
> + /*Registers 0 to 31 within PHY device 0/1 */
> + struct alt_tse_mdio mdio_phy0;
> + struct alt_tse_mdio mdio_phy1;
> +
> + /*4 Supplemental MAC Addresses */
> + unsigned int supp_mac_addr_0_0;
> + unsigned int supp_mac_addr_0_1;
> + unsigned int supp_mac_addr_1_0;
> + unsigned int supp_mac_addr_1_1;
> + unsigned int supp_mac_addr_2_0;
> + unsigned int supp_mac_addr_2_1;
> + unsigned int supp_mac_addr_3_0;
> + unsigned int supp_mac_addr_3_1;
> +
> + unsigned int reservedx320[56];
> +} alt_tse_mac;
> +
> +struct altera_tse_priv {
> + char devname[16];
> + alt_tse_mac *mac_dev;
> + struct alt_sgdma_registers *sgdma_rx;
> + struct alt_sgdma_registers *sgdma_tx;
> + unsigned int rx_sgdma_irq;
> + unsigned int tx_sgdma_irq;
> + unsigned int has_descriptor_mem;
> + unsigned int descriptor_mem_base;
> + unsigned int descriptor_mem_size;
> + volatile struct alt_sgdma_descriptor *rx_desc;
> + volatile struct alt_sgdma_descriptor *tx_desc;
> + volatile unsigned char *rx_buf;
> + struct phy_info *phyinfo;
> + unsigned int phyaddr;
> + unsigned int flags;
> + unsigned int link;
> + unsigned int duplexity;
> + unsigned int speed;
> +};
> +
> +/* Phy stuff continued */
> +/*
> + * struct phy_cmd: A command for reading or writing a PHY register
> + *
> + * mii_reg: The register to read or write
> + *
> + * mii_data: For writes, the value to put in the register.
> + * A value of -1 indicates this is a read.
> + *
> + * funct: A function pointer which is invoked for each command.
> + * For reads, this function will be passed the value read
> + * from the PHY, and process it.
> + * For writes, the result of this function will be written
> + * to the PHY register
> + */
> +struct phy_cmd {
> + uint mii_reg;
> + uint mii_data;
> + uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
> +};
> +#endif /* _ALTERA_TSE_H_ */
> diff --git a/include/netdev.h b/include/netdev.h
> index f008323..55521f3 100644
> --- a/include/netdev.h
> +++ b/include/netdev.h
> @@ -42,6 +42,7 @@ int cpu_eth_init(bd_t *bis);
>
> /* Driver initialization prototypes */
> int au1x00_enet_initialize(bd_t*);
> +int altera_tse_init(bd_t *bis, int num_tses);
>
Alphabetical order, please.
> int at91emac_register(bd_t *bis, unsigned long iobase);
> int bfin_EMAC_initialize(bd_t *bis);
> int cs8900_initialize(u8 dev_num, int base_addr);
>
regards,
Ben
More information about the U-Boot
mailing list