[U-Boot] Please pull u-boot-mpc85xx

[Wolfgang Denk]

Dear Kumar Gala,

In message <Pine.LNX.4.64.1004070223390.21930 at localhost.localdomain> you wrote:
> The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
>   Wolfgang Denk (1):
>         Merge branch 'next'
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc85xx master
> 
> Dave Liu (2):
>       fsl-ddr: Fix the turnaround timing for TIMING_CFG_4
>       fsl-ddr: change the default burst mode for DDR3
> 
> Jerry Huang (1):
>       fsl_esdhc: Add function to reset the eSDHC controller
> 
> Kumar Gala (6):
>       fsl_esdhc: Always stop clock before changing frequency
>       85xx: Add defines for BUCSR bits to make code more readable
>       fdt: Add fdt_del_node_and_alias helper
>       ppc/8xxx: Delete PCI nodes from device tree if not configured
>       85xx: Added various P1012/P1013/P1021/P1022 defines
>       ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size
> 
> Roy Zang (1):
>       fsl_esdhc: Only modify the field we are changing in WML
> 
> Sandeep Gopalpet (1):
>       85xx: Set HID1[mbdd] on e500v2 rev5.0 or greater
> 
> Timur Tabi (2):
>       fsl: improve the PIXIS code and fix a few bugs
>       p2020ds: add alternate boot bank support using the ngPIXIS FPGA
> 
>  board/freescale/common/Makefile               |    1 +
>  board/freescale/common/ngpixis.c              |  136 +++++++++++++
>  board/freescale/common/ngpixis.h              |   57 ++++++
>  board/freescale/common/pixis.c                |  254 ++++++++++++-------------
>  board/freescale/common/pixis.h                |   31 ---
>  board/freescale/mpc8536ds/mpc8536ds.c         |    1 -
>  board/freescale/mpc8544ds/mpc8544ds.c         |    1 -
>  board/freescale/mpc8572ds/mpc8572ds.c         |    1 -
>  board/freescale/mpc8610hpcd/mpc8610hpcd.c     |    2 -
>  board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c |    1 -
>  board/freescale/mpc8641hpcn/mpc8641hpcn.c     |    2 -
>  board/freescale/p2020ds/p2020ds.c             |   56 ++----
>  common/fdt_support.c                          |   13 ++
>  cpu/mpc512x/diu.c                             |    1 -
>  cpu/mpc85xx/Makefile                          |    4 +
>  cpu/mpc85xx/release.S                         |   12 +-
>  cpu/mpc85xx/start.S                           |   14 +-
>  cpu/mpc8xxx/cpu.c                             |   10 +-
>  cpu/mpc8xxx/ddr/ctrl_regs.c                   |   26 ++-
>  cpu/mpc8xxx/ddr/options.c                     |   14 +-
>  cpu/mpc8xxx/pci_cfg.c                         |   30 +++-
>  drivers/misc/fsl_law.c                        |    4 +-
>  drivers/mmc/fsl_esdhc.c                       |   37 +++--
>  drivers/pci/fsl_pci_init.c                    |   18 ++-
>  include/asm-ppc/config.h                      |    3 +-
>  include/asm-ppc/processor.h                   |   12 ++
>  include/configs/MPC8536DS.h                   |    3 +
>  include/configs/MPC8569MDS.h                  |    3 +
>  include/configs/MPC8610HPCD.h                 |    2 +-
>  include/configs/P1_P2_RDB.h                   |    3 +
>  include/configs/P2020DS.h                     |   62 +------
>  include/fdt_support.h                         |    1 +
>  include/fsl_esdhc.h                           |    6 +-
>  33 files changed, 517 insertions(+), 304 deletions(-)
>  create mode 100644 board/freescale/common/ngpixis.c
>  create mode 100644 board/freescale/common/ngpixis.h
>  delete mode 100644 board/freescale/common/pixis.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All men should freely use those seven words which have the  power  to
make any marriage run smoothly: You know dear, you may be right.