[U-Boot] [PATCH] ppc4xx: Add option for PPC440SPe ports without old Rev. A support

Stefan Roese sr at denx.de
Fri Apr 9 16:25:28 CEST 2010


The 440SPe Rev. A is quite old and newer 440SPe boards don't need support
for this CPU revision. Since removing support for this older version
simplifies the creation for newer U-Boot ports, this patch now enables
440SPe > Rev. A support by creating the CONFIG_440SPE_REVA define. By
defining this in the board config header, Rev. A will still be supported.
Otherwise (default for newer board ports), Rev. A will not be supported.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 cpu/ppc4xx/start.S       |    2 +-
 include/configs/katmai.h |    1 +
 include/configs/yucca.h  |    1 +
 3 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 927c88c..c739deb 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -475,7 +475,7 @@ tlbnxt:	addi	r4,r4,1		/* Next TLB */
 	/*----------------------------------------------------------------*/
 	/* TLB entry setup -- step thru tlbtab */
 	/*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE_REVA)
 	/*----------------------------------------------------------------*/
 	/* We have different TLB tables for revA and rev B of 440SPe */
 	/*----------------------------------------------------------------*/
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index c013ac4..fb8ccae 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -37,6 +37,7 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 42f8807..0b4dfb8 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -37,6 +37,7 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define EXTCLK_33_33		33333333
-- 
1.7.0.4



More information about the U-Boot mailing list