[U-Boot] [PATCH v3 3/3] IGEP v2 support

Enric Balletbo i Serra eballetbo at gmail.com
Wed Apr 14 10:36:30 CEST 2010


From: Enric Balletbo i Serra <eballetbo at iseebcn.com>

This patch adds support for the IGEP v2 board.

The IGEP v2 board is a low-cost, fan-less and industrial temperature
range single board computer that unleashes laptop-like performance and
expandability without the bulk, expense, or noise of typical desktop
machines. Its architecture shares much in common with other OMAP3 boards.

Signed-off-by: Enric Balletbo i Serra <eballetbo at iseebcn.com>
---
 MAINTAINERS                      |    4 +
 Makefile                         |    3 +
 board/isee/igep0020/Makefile     |   49 +++++
 board/isee/igep0020/config.mk    |   34 ++++
 board/isee/igep0020/igep0020.c   |  134 +++++++++++++
 board/isee/igep0020/igep0020.h   |  399 ++++++++++++++++++++++++++++++++++++++
 include/configs/omap3_igep0020.h |  245 +++++++++++++++++++++++
 7 files changed, 868 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/omap3_igep0020.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 94839ce..19da604 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -525,6 +525,10 @@ Stefano Babic <sbabic at denx.de>
 	polaris		xscale
 	trizepsiv	xscale
 
+Enric Balletbo i Serra <eballetbo at gmail.com>
+
+	omap3_igep0020	ARM CORTEX-A8 (OMAP3530 SoC)
+
 Dirk Behme <dirk.behme at gmail.com>
 
 	omap3_beagle	ARM CORTEX-A8 (OMAP3530 SoC)
diff --git a/Makefile b/Makefile
index 412e359..90f8c29 100644
--- a/Makefile
+++ b/Makefile
@@ -3161,6 +3161,9 @@ omap3_overo_config :	unconfig
 omap3_evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
 
+omap3_igep0020_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 igep0020 isee omap3
+
 omap3_pandora_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
 
diff --git a/board/isee/igep0020/Makefile b/board/isee/igep0020/Makefile
new file mode 100644
index 0000000..2f11879
--- /dev/null
+++ b/board/isee/igep0020/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= igep0020.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/isee/igep0020/config.mk b/board/isee/igep0020/config.mk
new file mode 100644
index 0000000..a05f782
--- /dev/null
+++ b/board/isee/igep0020/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009
+# Integration Software and Electronics Engineering, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x8ff00000
+
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
new file mode 100644
index 0000000..a9d9deb
--- /dev/null
+++ b/board/isee/igep0020/igep0020.c
@@ -0,0 +1,134 @@
+/*
+ * Maintainer: Integration Software and Electronics Engineering, <www.iseebcn.com>
+ *
+ * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
+ *	Richard Woodruff <r-woodruff2 at ti.com>
+ *	Syed Mohammed Khasim <khasim at ti.com>
+ *	Sunil Kumar <sunilsaini05 at gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+#include "igep0020.h"
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#if defined(CONFIG_CMD_NET)
+	setup_net_chip();
+#endif
+
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_IGEP0020();
+}
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to the
+ *		Ethernet hardware.
+ */
+static void setup_net_chip(void)
+{
+	struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
+	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+	/* Configure GPMC registers */
+	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
+	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
+	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
+	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
+	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
+	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
+	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
+
+	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+	writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+		&ctrl_base->gpmc_nadv_ale);
+
+	/* Make GPIO 64 as output pin */
+	writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
+
+	/* Now send a pulse on the GPIO pin */
+	writel(GPIO0, &gpio3_base->setdataout);
+	udelay(1);
+	writel(GPIO0, &gpio3_base->cleardataout);
+	udelay(1);
+	writel(GPIO0, &gpio3_base->setdataout);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
+
diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
new file mode 100644
index 0000000..e5e0ac9
--- /dev/null
+++ b/board/isee/igep0020/igep0020.h
@@ -0,0 +1,399 @@
+/*
+ * (C) Copyright 2009
+ * Integration Software and Electronics Engineering, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _IGEP0020_H_
+#define _IGEP0020_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_STACKED,
+	"IGEP v2 board",
+	"ONENAND",
+};
+
+static void setup_net_chip(void);
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_IGEP0020() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /* SDRC_D0  */\
+ MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /* SDRC_D1  */\
+ MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /* SDRC_D2  */\
+ MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /* SDRC_D3  */\
+ MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /* SDRC_D4  */\
+ MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /* SDRC_D5  */\
+ MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /* SDRC_D6  */\
+ MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /* SDRC_D7  */\
+ MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /* SDRC_D8  */\
+ MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /* SDRC_D9  */\
+ MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /* SDRC_D10 */\
+ MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /* SDRC_D11 */\
+ MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /* SDRC_D12 */\
+ MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /* SDRC_D13 */\
+ MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /* SDRC_D14 */\
+ MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /* SDRC_D15 */\
+ MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /* SDRC_D16 */\
+ MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /* SDRC_D17 */\
+ MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /* SDRC_D18 */\
+ MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /* SDRC_D19 */\
+ MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /* SDRC_D20 */\
+ MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /* SDRC_D21 */\
+ MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /* SDRC_D22 */\
+ MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /* SDRC_D23 */\
+ MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /* SDRC_D24 */\
+ MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /* SDRC_D25 */\
+ MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /* SDRC_D26 */\
+ MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /* SDRC_D27 */\
+ MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /* SDRC_D28 */\
+ MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /* SDRC_D29 */\
+ MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /* SDRC_D30 */\
+ MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /* SDRC_D31 */\
+ MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /* SDRC_CLK */\
+ MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /* SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /* SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /* SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /* SDRC_DQS3*/\
+ /* GPMC - General-Purpose Memory Controller */\
+ MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) /* GPMC_A1       */\
+ MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) /* GPMC_A2       */\
+ MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) /* GPMC_A3       */\
+ MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) /* GPMC_A4       */\
+ MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) /* GPMC_A5       */\
+ MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) /* GPMC_A6       */\
+ MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) /* GPMC_A7       */\
+ MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) /* GPMC_A8       */\
+ MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) /* GPMC_A9       */\
+ MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) /* GPMC_A10      */\
+ MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) /* GPMC_D0       */\
+ MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) /* GPMC_D1       */\
+ MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) /* GPMC_D2       */\
+ MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) /* GPMC_D3       */\
+ MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) /* GPMC_D4       */\
+ MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) /* GPMC_D5       */\
+ MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) /* GPMC_D6       */\
+ MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) /* GPMC_D7       */\
+ MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) /* GPMC_D8       */\
+ MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) /* GPMC_D9       */\
+ MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) /* GPMC_D10      */\
+ MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) /* GPMC_D11      */\
+ MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) /* GPMC_D12      */\
+ MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) /* GPMC_D13      */\
+ MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) /* GPMC_D14      */\
+ MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) /* GPMC_D15      */\
+ MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS0     */\
+ MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS1     */\
+ MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS2     */\
+ MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS3     */\
+ MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS4     */\
+ MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS5     */\
+ MUX_VAL(CP(GPMC_NCS6),		(IDIS | PTU | EN  | M0)) /* GPMC_nCS6     */\
+ MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /* GPMC_nOE      */\
+ MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /* GPMC_nWE      */\
+ \
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M4)) /* GPIO_64 -ETH_NRESET */\
+ \
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /* SYS_nDMA_REQ3 */\
+ MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /* GPMC_CLK      */\
+ MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /* GPMC_nBE1     */\
+ MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
+ MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
+ MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /* GPMC_nWP      */\
+ MUX_VAL(CP(GPMC_WAIT0),	(IEN  | PTU | EN  | M0)) /* GPMC_WAIT0    */\
+ MUX_VAL(CP(GPMC_WAIT1),	(IEN  | PTU | EN  | M0)) /* GPMC_WAIT1    */\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0)) /* GPMC_WAIT3    */\
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /* DSS_PCLK   */\
+ MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /* DSS_HSYNC  */\
+ MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /* DSS_VSYNC  */\
+ MUX_VAL(CP(DSS_ACBIAS),	(IDIS | PTD | DIS | M0)) /* DSS_ACBIAS */\
+ MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /* DSS_DATA0  */\
+ MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /* DSS_DATA1  */\
+ MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /* DSS_DATA2  */\
+ MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /* DSS_DATA3  */\
+ MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /* DSS_DATA4  */\
+ MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /* DSS_DATA5  */\
+ MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /* DSS_DATA6  */\
+ MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /* DSS_DATA7  */\
+ MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /* DSS_DATA8  */\
+ MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /* DSS_DATA9  */\
+ MUX_VAL(CP(DSS_DATA10),	(IDIS | PTD | DIS | M0)) /* DSS_DATA10 */\
+ MUX_VAL(CP(DSS_DATA11),	(IDIS | PTD | DIS | M0)) /* DSS_DATA11 */\
+ MUX_VAL(CP(DSS_DATA12),	(IDIS | PTD | DIS | M0)) /* DSS_DATA12 */\
+ MUX_VAL(CP(DSS_DATA13),	(IDIS | PTD | DIS | M0)) /* DSS_DATA13 */\
+ MUX_VAL(CP(DSS_DATA14),	(IDIS | PTD | DIS | M0)) /* DSS_DATA14 */\
+ MUX_VAL(CP(DSS_DATA15),	(IDIS | PTD | DIS | M0)) /* DSS_DATA15 */\
+ MUX_VAL(CP(DSS_DATA16),	(IDIS | PTD | DIS | M0)) /* DSS_DATA16 */\
+ MUX_VAL(CP(DSS_DATA17),	(IDIS | PTD | DIS | M0)) /* DSS_DATA17 */\
+ MUX_VAL(CP(DSS_DATA18),	(IDIS | PTD | DIS | M0)) /* DSS_DATA18 */\
+ MUX_VAL(CP(DSS_DATA19),	(IDIS | PTD | DIS | M0)) /* DSS_DATA19 */\
+ MUX_VAL(CP(DSS_DATA20),	(IDIS | PTD | DIS | M0)) /* DSS_DATA20 */\
+ MUX_VAL(CP(DSS_DATA21),	(IDIS | PTD | DIS | M0)) /* DSS_DATA21 */\
+ MUX_VAL(CP(DSS_DATA22),	(IDIS | PTD | DIS | M0)) /* DSS_DATA22 */\
+ MUX_VAL(CP(DSS_DATA23),	(IDIS | PTD | DIS | M0)) /* DSS_DATA23 */\
+ /* Audio Interface */\
+ MUX_VAL(CP(MCBSP2_FSX),	(IEN  | PTD | DIS | M0)) /* McBSP2_FSX  */\
+ MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /* McBSP2_CLKX */\
+ MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /* McBSP2_DR   */\
+ MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /* McBSP2_DX   */\
+ /* Expansion card 1 */\
+ MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /* MMC1_CLK  */\
+ MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /* MMC1_CMD  */\
+ MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT0 */\
+ MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT1 */\
+ MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT2 */\
+ MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT3 */\
+ \
+ MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT4 */\
+ MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT5 */\
+ MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT6 */\
+ MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /* MMC1_DAT7 */\
+ /* SDIO Interface to WIFI Module (EXPANSION CONNECTOR) */\
+ MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /* MMC2_CLK  */\
+ MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /* MMC2_CMD  */\
+ MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /* MMC2_DAT0 */\
+ MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /* MMC2_DAT1 */\
+ MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /* MMC2_DAT2 */\
+ MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /* MMC2_DAT3 */\
+ \
+ /* GSPI Interface to WIFI Module */ \
+/* MUX_VAL(CP(MMC2_CLK),		(IEN  | PTD | DIS | M1)) McSPI3_CLK  */\
+/* MUX_VAL(CP(MMC2_CMD),		(IEN  | PTD | DIS | M1)) McSPI3_SIMO */\
+/* MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTD | DIS | M1)) McSPI3_SOMI */\
+/* MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTD | DIS | M4)) GPIO_133    */\
+/* MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTD | DIS | M4)) GPIO_134    */\
+/* MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTD | DIS | M4)) GPIO_135 (GPIO-Based CS) */\
+ \
+ MUX_VAL(CP(CAM_HS),		(IDIS | PTD | DIS | M4)) /* GPIO_94 - PDN (Rev. B) */\
+ MUX_VAL(CP(CAM_VS),		(IDIS | PTD | DIS | M4)) /* GPIO_95 - RESET_N_W (Rev. B) */\
+ \
+ MUX_VAL(CP(MMC2_DAT4),		(IDIS | PTD | DIS | M4)) /* GPIO_136 */\
+ MUX_VAL(CP(MMC2_DAT5),		(IDIS | PTD | DIS | M4)) /* GPIO_137 - RESET_N_B */\
+ MUX_VAL(CP(MMC2_DAT6),		(IDIS | PTD | DIS | M4)) /* GPIO_138 - PDN (Rev. C)  */\
+ MUX_VAL(CP(MMC2_DAT7),		(IDIS | PTD | DIS | M4)) /* GPIO_139 - RESET_N_W (Rev. C) */\
+ /* Bluetooth (EXPANSION CONNECTOR) */\
+ MUX_VAL(CP(MCBSP3_DX),		(IDIS | PTD | DIS | M0)) /* McBSP3_DX */\
+ MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M0)) /* McBSP3_DR */\
+ MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M0)) /* McBSP3_CLKX  */\
+ MUX_VAL(CP(MCBSP3_FSX),	(IEN  | PTD | DIS | M0)) /* McBSP3_FSX   */\
+ MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /* UART2_CTS */\
+ MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /* UART2_RTS */\
+ MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /* UART2_TX  */\
+ MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) /* UART2_RX  */\
+ /* 485 Interface */\
+ MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /* UART1_TX  */\
+ MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M0)) /* UART1_RTS */\
+ MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M0)) /* UART1_CTS */\
+ MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /* UART1_RX  */\
+ MUX_VAL(CP(MCBSP4_CLKX),	(IDIS | PTD | DIS | M4)) /* GPIO_152  */\
+ /* Serial Interface */\
+ MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /* UART3_CTS_RCTX*/\
+ MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /* UART3_RTS_SD */\
+ MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /* UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /* UART3_TX_IRTX*/\
+ MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /* HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /* HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT),	(IEN  | PTD | DIS | M0)) /* HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /* HSUSB0_DATA7*/\
+ MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /* I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /* I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /* GPIO_168*/\
+ MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /* GPIO_183*/\
+ MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /* I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /* I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /* I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /* I2C4_SDA*/\
+ MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /* GPIO_170*/\
+ /* SPI1 ADC121S101 */ \
+ MUX_VAL(CP(MCSPI1_CLK),	(IEN  | PTD | DIS | M0)) /* McSPI1_CLK  */\
+ MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) /* McSPI1_SIMO */\
+ MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /* McSPI1_SOMI */\
+ MUX_VAL(CP(MCSPI1_CS3),	(IDIS | PTD | DIS | M0)) /* McSPI1_CS3  */\
+ \
+ MUX_VAL(CP(MCSPI1_CS0),	(IDIS | PTD | DIS | M0)) /* McSPI1_CS0  */\
+ MUX_VAL(CP(MCSPI1_CS1),	(IEN  | PTD | DIS | M4)) /* GPIO_175   */\
+ MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTD | DIS | M4)) /* GPIO_176   */\
+ /* SPI2 (25GHz RF PORT) */ \
+ MUX_VAL(CP(MCSPI2_CLK),	(IEN  | PTD | DIS | M0)) /* McSPI2_CLK  */\
+ MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) /* McSPI2_SIMO */\
+ MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) /* McSPI2_SOMI */\
+ MUX_VAL(CP(MCSPI2_CS0),	(IDIS | PTD | DIS | M0)) /* McSPI2_CS0  */\
+ \
+ MUX_VAL(CP(MCSPI2_CS1),	(IEN  | PTD | DIS | M4)) /* GPIO_182    */\
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /* SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ),	(IEN  | PTD | DIS | M0)) /* SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /* SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /* GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /* GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /* GPIO_4 - MMC1_WP*/\
+ MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /* GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /* GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /* GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /* GPIO_8*/ \
+ /* VIO_1V8 */\
+ MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /* SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /* SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /* GPIO_186*/\
+ /* USB EHCI (port 1)  */ \
+ MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | DIS | M3)) /* HSUSB1_STP   */\
+ MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTU | DIS | M3)) /* HSUSB1_CLK   */\
+ MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA0 */\
+ MUX_VAL(CP(ETK_D1_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA1 */\
+ MUX_VAL(CP(ETK_D2_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA2 */\
+ MUX_VAL(CP(ETK_D3_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA3 */\
+ MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA4 */\
+ MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA5 */\
+ MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA6 */\
+ MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DATA7 */\
+ MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_DIR   */\
+ MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | DIS | M3)) /* HSUSB1_NXT   */\
+ /* Generic IO (outputs) */\
+ MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTU | DIS | M4)) /* GPIO_24  - USB1HS_nRST */\
+ MUX_VAL(CP(ETK_D12_ES2),	(IDIS | PTU | DIS | M4)) /* GPIO_26  - LED1        */\
+ MUX_VAL(CP(ETK_D13_ES2),	(IDIS | PTU | DIS | M4)) /* GPIO_27  - LED0        */\
+ MUX_VAL(CP(CAM_D6),		(IDIS | PTU | DIS | M4)) /* GPIO_105 - RF_CTRL     */\
+ MUX_VAL(CP(CAM_D7),		(IDIS | PTU | DIS | M4)) /* GPIO_106 - RF_STANDBY  */\
+ MUX_VAL(CP(CAM_D8),		(IDIS | PTU | DIS | M4)) /* GPIO_107 - RF_INT      */\
+ MUX_VAL(CP(CAM_D9),		(IDIS | PTU | DIS | M4)) /* GPIO_108 - RF_SYNCB    */\
+ /* Generic IO (inputs) */\
+ MUX_VAL(CP(ETK_D11_ES2),	(IEN  | PTD | DIS | M4)) /* GPIO_25   */\
+ MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M4)) /* GPIO_28   */\
+ MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M4)) /* GPIO_29   */\
+ MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M4)) /* GPIO_99   */\
+ MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M4)) /* GPIO_100  */\
+ MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M4)) /* GPIO_112  */\
+ MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M4)) /* GPIO_113  */\
+ MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M4)) /* GPIO_114  */\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M4)) /* GPIO_115  */\
+ \
+ \
+ /* LCD_INI */\
+ MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) /* GPIO_153  */\
+ /* LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M4)) /* GPIO_154 */\
+ /* LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX),	(IDIS | PTD | DIS | M4)) /* GPIO_155 */\
+ /* LCD_RESB */\
+ MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /* GPIO_156 */\
+ MUX_VAL(CP(MCBSP1_FSR),	(IDIS | PTU | EN  | M4)) /* GPIO_157 */\
+ MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M4)) /* GPIO_158 */\
+ MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /* GPIO_159 */\
+ MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTU | DIS | M0)) /* McBSP_CLKS */\
+ MUX_VAL(CP(MCBSP1_FSX),	(IDIS | PTD | DIS | M4)) /* GPIO_161 */\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /* GPIO_162 */\
+ \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /* CAM_XCLKA */\
+ MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /* CAM_PCLK  */\
+ MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /* GPIO_98   */\
+ MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /* CAM_D2    */\
+ MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /* CAM_D3    */\
+ MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /* CAM_D4    */\
+ MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /* CAM_D5    */\
+ MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /* CAM_D10   */\
+ MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /* CAM_D11   */\
+ MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /* CAM_XCLKB */\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /* GPIO_167  */\
+ MUX_VAL(CP(CAM_STROBE),	(IDIS | PTD | DIS | M0)) /* CAM_STROBE*/\
+ \
+ MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10),	(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11),	(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12),	(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13),	(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14),	(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15),	(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16),	(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17),	(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18),	(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19),	(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20),	(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21),	(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22),	(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23),	(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24),	(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25),	(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26),	(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27),	(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28),	(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29),	(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30),	(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31),	(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32),	(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33),	(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34),	(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35),	(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36),	(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
+ MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
+ MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
+ MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
+ MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
+ MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
+ MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
+ MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
+ MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
+ MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
+ MUX_VAL(CP(D2D_N3GTDI),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
+ MUX_VAL(CP(D2D_MSTDBY),	(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
+ MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
+ MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
+ MUX_VAL(CP(D2D_MWRITE),	(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE),	(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
+ MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
+ MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+#endif
diff --git a/include/configs/omap3_igep0020.h b/include/configs/omap3_igep0020.h
new file mode 100644
index 0000000..0b2564a
--- /dev/null
+++ b/include/configs/omap3_igep0020.h
@@ -0,0 +1,245 @@
+/*
+ * Configuration settings for the IGEP v2 board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/* 
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_IGEP0020	1	/* working with IGEP0020 */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/* 
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/* 
+ * NS16550 Configuration
+ */
+
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/* select serial console configuration */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,115200}
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* DDR - Use Numonyx DDR */
+#define CONFIG_OMAP3_NUMONYX_DDR	1
+
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"IGEP v2"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_ONENAND	/* ONENAND support		*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS		/* NFS support			*/
+
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMI		/* iminfo			*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+#undef CONFIG_CMD_JFFS2		/* JFFS2 Support		*/
+#undef CONFIG_CMD_NAND	  	/* NAND support			*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_EXTRA_ENV_SETTINGS	"\0"
+#define CONFIG_BOOTCOMMAND		"mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"U-Boot # "
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+								/* works on */
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
+							/* load address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
+
+#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_ONENAND	1
+
+#define CONFIG_ENV_SIZE			(512 << 10)	/* 512 KiB */
+
+#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
+#define CONFIG_ENV_OFFSET		boot_flash_off
+#define ONENAND_ENV_OFFSET		0x200000 /* environment starts here */
+
+#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+
+/*
+ * SMSC911x Ethernet
+ */
+#if defined(CONFIG_CMD_NET)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE	0x2C000000
+
+
+#endif /* (CONFIG_CMD_NET) */
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif /* __CONFIG_H */
+
-- 
1.5.4.3



More information about the U-Boot mailing list