[U-Boot] [PATCH v3 2/3] mpc5121: add support for PDM360NG board

[Anatolij Gustschin]

Hello Wolfgang,

On Wed, 14 Apr 2010 17:48:40 +0200
Wolfgang Denk <wd at denx.de> wrote:

> In message <1271254909-20398-3-git-send-email-agust at denx.de> you wrote:
> > PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
> ...
> >  - don't use DDR RAM size config macro, get_ram_size() is
> >    used now in fixed_sdram() to determine RAM size (see
> >    previous patch 1/3)
> 
> With this change, can we then not also get rid of manually defining
> CONFIG_PDM360NG_BIG ?  We should be able to auto-detect the
> configuration from the actual RAM size now, right?

But another configuration for 128 MB uses different values
for DDR System Configuration Register and DDR Time Config[0-2]
Registers. We still need this config option.

Best regards,
Anatolij